Study of the performance of polyurethane coatings derived from cottonseed oil polyol

Lligadas, G, Ronda, JC, Galià, M, Cádiz, V, “Oleic and Undecylenic Acids as Renewable Feedstocks in the Synthesis of Polyols and Polyurethanes.” Polymer, 2 (4) 440–453 (2010) Bakhshi, H, Yeganeh, H, Mehdipour-Ataei, S, Solouk, A, Irani, S, “Polyurethane Coatings Derived from 1,2,3-Triazole-Functionalized Soybean Oil-Based Polyols: Studying Their Physical, Mechanical, Thermal, and Biological Properties.” Macromolecules, 46 7777–7788 (2013) Zhang, C, Li, Y, Chen, R, Kessler, MR, “Polyurethanes from Solvent-Free Vegetable Oil-Based Polyols.” Sustain. Chem. Eng., 2 2465–2476 (2014) Kong, X, Liu, G, Qi, H, Curtis, JM, “Preparation and Characterization of High-solid Polyurethane Coating Systems based on Vegetable Oil Derived Polyols.” Prog. Org. Coat., 76 1151–1160 (2013) Ismail, EA, Motawie, AM, Sadek, EM, “Synthesis and Characterization of Polyurethane Coatings based on Soybean Oil-Polyester Polyols.” Egypt. J. Petrol., 20 1–8 (2011) Velayutham, TS, Majid, WHA, Ng, BK, Gan, SN, “Effect of Oleic Acid Content and Chemical Crosslinking on the Properties of Palm Oil-Based Polyurethane Coatings.” J. Appl. Polym. Sci., (2013). doi:10.1002/app.38768 Petrović, ZS, “Polyurethanes from Vegetable Oils.” Polym. Rev., 48 109–155 (2008) Erhan, SZ, Industrial Uses of Vegetable Oils. AOCS Press, Champaign, IL 2005 Swern, D, Billen, GN, Findley, TW, Scanlan, JT, “Hydroxylation of Monounsaturated Fatty Materials with Hydrogen Peroxide.” J. Am. Chem. Soc., 67 1786–1789 (1945) Liu, Z, Erhan, SZ, “Ring-Opening Polymerization of Epoxidized Soybean Oil.” J. Am. Oil. Chem. Soc., 87 437–444 (2010) Guo, Y, Hardesty, JH, Mannari, VM, Massingill, JL, “Hydrolysis of Epoxidized Soyabean Oil in the Presence of Phosphoric Acid.” J. Am. Oil Chem. Soc., 84 929–935 (2007) Lozada, Z, Suppes, GJ, Tu, Y-C, Hsieh, F-H, “Soy-Based Polyols from Oxirane Ring Opening by Alcoholysis Reaction.” J. Appl. Polym. Sci., 113 2552–2560 (2009) Xia, Y, Larock, RC, “Vegetable Oil-Based Polymeric Materials: Synthesis, Properties, and Applications.” Green Chem., 12 1893–1909 (2010) Guo, A, Javni, I, Petrović, Z, “Rigid Polyurethane Foams Based on Soybean Oil.” J. App. Polym. Sci., 77 467–473 (2000) Zlatanić, A, Lava, C, Zhang, W, Petrović, ZS, “Effect of Structure on Properties of Polyols and Polyurethanes Based on Different Vegetable Oils.” J. Polym. Sci. Polym. Phys., 42 809–819 (2004) Pechar, TW, Sohn, S, Wilkes, GL, Ghosh, S, Frazier, CE, Fornof, A, Long, TE, “Characterization and Comparison of Polyurethane Networks Prepared Using Soybean-Based Polyols with Varying Hydroxyl Content and Their Blends with Petroleum-Based Polyols.” J. App. Polym. Sci., 101 1432–1443 (2006) Wang, Z, Cui, Y-T, Xu, Z-B, Qu, J, “Hot Water-Promoted Ring-Opening of Epoxides and Aziridines by Water and Other Nucleopliles.” J. Org. Chem., 73 2270–2274 (2008) Desroches, M, Escouvois, M, Auvergne, R, Caillol, S, Boutevin, B, “From Vegetable Oils to Polyurethanes: Synthetic Routes to Polyols and Main Industrial Products.” Polym. Rev., 52 38–79 (2012) Okieimen, FE, Pavithran, C, Bakare, IO, “Epoxidation and Hydroxylation of Rubber Seed Oil: One-Pot Multi-step Reactions.” Eur. J. Lipid Sci. Technol., 107 330–336 (2005) Güner, FS, Yağci, Y, Erciyes, AT, “Polymers from Triglyceride Oils.” Prog. Polym. Sci., 31 633–670 (2006) Harry, RE, Holser, RA, Abbott, TP, Weisleder, D, “Synthesis and Characteristics of Polyhydroxy Triglycerides from Milkweed Oil.” Ind. Crops Prod., 15 51–58 (2002) Deka, H, Karak, N, “Bio-based Hyperbranched Polyurethanes for Surface Coating Applications.” Prog. Org. Coat., 66 192–198 (2009) Kalita, H, Karak, N, “Biobased Hyperbranched Shape-Memory Polyurethanes: Effect of Different Vegetable Oils.” J. App. Polym. Sci., (2014). doi:10.1002/app.39579 Petrović, ZS, Guo, A, Javni, I, Cvetković, I, Hong, DP, “Polyurethane Networks from Polyols Obtained by Hydroformylation of Soybean Oil.” Polym Int., 57 275–281 (2008) Hablot, E, Zheng, D, Bouquey, M, Avérous, L, “Polyurethanes Based on Castor Oil: Kinetics, Chemical, Mechanical and Thermal Properties.” Macromol. Mater. Eng., 293 922–929 (2008) Dutta, S, Karak, N, “Effect of the NCO/OH Ratio on the Properties of Mesua Ferrea L. Seed Oil-Modified Polyurethane Resins.” Polym. Int., 55 49–56 (2006) Petrović, ZS, Yang, L, Zlatanić, A, Zhang, W, Javni, I, “Network Structure and Properties of Polyurethanes from Soybean Oil.” J. App. Polym. Sci., 105 2717–2727 (2007) Teramoto, N, Saitoh, Y, Takahashi, A, Shibata, M, “Biodegradable Polyurethane Elastomers Prepared from Isocyanate-Terminated Poly (Ethylene Adipate), Castor Oil, and Glycerol.” J. App. Polym. Sci., 115 3199–3204 (2010) Meshram, PD, Puri, RG, Patil, AL, Gite, VV, “High Performance Moisture Cured Poly (Ether-Urethane) Amide Coatings Based on Renewable Resource (Cottonseed Oil).” J. Coat. Technol. Res., 10 331–338 (2013) Jia, LK, Gong, LX, Ji, WJ, Kan, CY, “Synthesis of Vegetable Oil Based Polyol with Cottonseed Oil and Sorbitol Derived from Natural Source.” Chin. Chem. Lett., 22 1289–1292 (2011) Tayde, S, Thorat, P, “Effect of Epoxidized Cottonseed Oil on Epoxy Resin and Its Thermal Behavior.” Int. J. Chem. Technol Res., 7 260–268 (2014–2015) Isaac, IO, Ekpa, OD, “Fatty Acid Composition of Cottonseed Oil and Its Application in Production and Evaluation of Biopolymers.” Am. J. Polym. Sci., 3 13–22 (2013) Erhan, SZ, Bagby, MO, “Polymerization of Vegetable Oils and Their Uses in Printing Inks.” J. Am. Oil Chem. Soc., 77 1223–1226 (1994) http://www.indexmundi.com/agriculture/?commodity=cottonseed-oil. Accessed Oct 2014. Sharma, V, Kundu, PP, “Addition Polymers from Natural Oils—A Review.” Prog. Polym. Sci., 31 983–1008 (2006) Agarwal, DK, Singh, P, Chakrabarty, M, Shaikh, AJ, Gyal, SG, Central Institute for Cotton Research (CICR) Technical Bull. No 25 (2003). Saralegi, A, Rueda, L, Fernández-d’Arlas, B, Mondragon, I, Eceiza, A, Corcuera, MA, “Thermoplastic Polyurethanes from Renewable Resources: Effect of Soft Segment Chemical Structure and Molecular Weight on Morphology and Final Properties.” Polym. Int., 62 (1) 106–115 (2013) Kumar, R, Narayan, R, Aminabhavi, TM, Raju, KVSN, “Nitrogen Rich Hyperbranched Polyol Via A3 + B3 Polycondensation: Thermal, Mechanical, Anti-corrosive and Antimicrobial Properties of Poly (Urethane-Urea).” J. Polym. Res., 21 547 (2014) Corcuera, MA, Rueda, L, Saralegui, A, Martín, MD, Fernández-d’Arlas, B, Mondragon, I, Eceiza, A, “Effect of Diisocyanate Structure on the Properties and Microstructure of Polyurethanes Based on Polyols Derived from Renewable Resources.” J. App. Polym. Sci., 122 3677–3685 (2011) Li, P, Shen, Y, Yang, X, Li, G, “Preparation and Properties of Waterborne Cationic Fluorinated Polyurethane.” J. Polym. Res., 19 9786–9795 (2012) Waterlot, V, Couturier, D, Waterlot, C, “Structure and Physical Properties in Crosslinked Polyurethanes.” J. Appl. Polym. Sci., 119 1742–1751 (2011) Yu, W, Du, M, Zhang, D, Lin, Y, Zheng, Q, “Influence of Dangling Chains on Molecular Dynamics of Polyurethanes.” Macromolecules, 46 7341–7351 (2013) Alam, M, Ashraf, SM, Ahmad, S, “Pyridine-Poly (Urethane Ester Amide) Coatings from Linseed Oil.” J. Polym. Res., 15 343–350 (2008) Chattopadhyay, DK, Raju, KVSN, “Structural Engineering of Polyurethane Coatings for High Performance Applications.” Prog. Polym. Sci., 32 352–418 (2007) Qin, L, Nie, J, He, Y, “Synthesis and Properties of Polyurethane Acrylate Modified by Different Contents of Stearyl Alcohol.” J. Coat. Technol. Res., 12 197–204 (2015) Harjono, P, Sugita, MZA, “Synthesis and Application of Jatropha Oil Based Polyurethane as Paint Coating Material.” Makara J. Sci., 16 134–140 (2012) Desai, SD, Patel, JV, Sinha, VK, “Polyurethane Adhesive System from Biomaterial-Based Polyol for Bonding Wood.” Int. J. Adhes. Adhes., 23 393–399 (2003) Jin, F-L, Park, S-J, “Impact-Strength Improvement of Epoxy Resins Reinforced with a Biodegradable Polymer.” Mater. Sci. Eng. A, 478 402–405 (2008) Nie, L, Burgess, A, Ryan, A, “Moisture Permeation in Liquid Crystalline Epoxy Thermosets.” Macromol. Chem. Phys., 214 225–235 (2013)