Study of the influence of synthetic filter media compressive behavior on its dust holding capacity

Hutten, 2007 Jaroszczyk, 2004, Recent advances in engine air cleaners design and evaluation, J. KONES Int. Combust. Eng., 11, 1 Payen, 2012, Influence of fiber diameter, fiber combinations and solid volume fraction on aerosol air filtration, Textile Res. J., 82, 1948, 10.1177/0040517512449066 Sakano, 2000, Particle collection of medium performance air filters consisting of binary fibers under dust loaded conditions, Sep. Purif. Technol., 19, 145, 10.1016/S1383-5866(99)00086-6 Xiaosong, 2011, Application of non-circular cross-section chemical fibers, Chem. Fibers Int., 61, 210 Mohammadi, 2002, Air permeability of multilayer needle punched nonwoven fabrics: theoretical method, J. Ind. Textiles, 32, 45, 10.1106/152808302031065 Krucinska, 2002, The influence of technological parameters on the filtration efficiency of electret needled non-woven fabrics, J. Electrost., 56, 143, 10.1016/S0304-3886(02)00060-8 Zobel, 2007, Simulating permeability of 3-D calendered fibrous structures, Chem Eng Sci, 62, 6285, 10.1016/j.ces.2007.07.007 Fotovati, 2012, A macroscale model for simulating pressure drop and collection efficiency of pleated filters over time, Sep. Purif. Technol., 98, 344, 10.1016/j.seppur.2012.07.009 W. Albrecht, H. Fuchs, W. Kittelmann, Nonwoven Fabrics: Raw Materials, Manufacture, Applications, Characteristics, Testing Processes, WILEY-VCH Verlag GmbH & Co. KGaA, 3527304061, Weinheim, 2003. Kanaoka, 1980, Simulation of the growing process of a particle dendrite and evaluation of a single fiber collection efficiency with dust load, Aerosol. Sci., 11, 377, 10.1016/0021-8502(80)90046-4 M. Rebaï, Analysis and modelisation of the flow and the clogging of an air pleated filter, Doctoral Thesis, IMFT, Toulouse, France, 2007. J. Payen, P. Vroman, M. Lewandowski, A. Perwuelz, S. Callé-Chazelet, D. Thomas, Influence of the structural characteristics of nonwovens on filtration properties: study of fiber diameter and solid volume fraction, AUTEX Proceedings Conference, 2008. P. Vroman, Advances in Fibers and Processes for Innovative Filter Media and Related Filtration, Structures, European Conference on Fluid-Particle Separation, 2010, Lyon, France. E. Jandos, M. Lebrun, C. Brezezinski, S. Capo Canizares, Filtration Technologies in the Automotive Industry, Multifunctional Barriers for Flexible Structures, 2007. D.H. Lee, Initial Compressional Behaviour of Fibre Assembly (in Korean), Doctoral thesis, Seoul National University, 1985. White, 1982, Capillary rise in powders, J. Colloid Interf. Sci., 90, 536, 10.1016/0021-9797(82)90319-8 Pan, 1989, Theory of the compression hysteresis of fibrous assemblies, Textile Res. J., 59, 10.1177/004051758905900506 van Wyk, 1946, Note on the compressibility of wool, J. Textile Inst., 37, T285, 10.1080/19447024608659279 Komori, 1977, Numbers of fiber-to-fiber contacts in general fiber assemblies, Textile Res. J., 47, 10.1177/004051757704700104 Komori, 1979, Geometrical expressions of spaces in anisotropic fiber assemblies, Textile Res. J., 49, 10.1177/004051757904900912 Pan, 1993, A modified analysis of the microstructural characteristics of general fiber assemblies, Textile Res. J., 63, 336, 10.1177/004051759306300605 Pan, 1997, Micromechanics of a planar hybrid fibrous network, Textile Res. J., 67, 12, 10.1177/004051759706701208 Kumar, 2014, A model for predicting uniaxial compression behavior of fused fibrous networks, Mech. Mater. J., 78, 66, 10.1016/j.mechmat.2014.07.014 M. Amiot Mise en oeuvre et étude de structures de nontissées et de composites poreux multifonctionnels en para-aramide: absorption acoustique et résistance à l’impact, Doctoral Thesis, USTI, Lille, France, 2012. Tran, 2012 Rawal, 2011, Pore size distribution of hybrid nonwoven geotextiles, Geotext. Geomembr. J., 29, 363, 10.1016/j.geotexmem.2010.12.006 Rawal, 2011, Pore Size characteristics of nonwoven structures under uniaxial tensile loading, Journal of Materials Science, 46, 4487, 10.1007/s10853-011-5342-x Jeon, 2014, In situ monitoring of structural changes in nonwoven mats under tensile loading using X-ray computer tomography, Compos. Part A: Appl. Sci. Manuf., 63, 1, 10.1016/j.compositesa.2014.03.019 Viguié, 2013, Finding fibers and their contacts within 3D images of disordered fibrous media, Compos. Sci. Technol. J., 89, 202, 10.1016/j.compscitech.2013.09.023 Malmberg, 2011, Measurement of fibre-fibre contact in three-dimensional images of fibrous materials obtained from X-ray synchrotron microtomography, Nucl. Instr. Meth. Phys. Res. A J., 637, 143, 10.1016/j.nima.2011.01.080