Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts

T. J. Ko and H. S. Kim, Surface integrity and machineability in intermittent hard turning, International J. of Advanced Manufacturing Technology, 18 (2001) 168–175.

H. Tonshoff, C. Arendt and R. B. Amor, Cutting of hardened steel, CIRP Annals -Manufacturing Technology, 49 (2002) 547–565.

W. Grzesik, Machining of hard materials, In: Paulo Davim, J. (ed.), Machining Fundamentals and Recent Advances, Springer-Verlag London (2008) 97–126.

S. R. Das, D. Dhupal and A. Kumar, Surface roughness analyses of turned hardened AISI 4340 steel with coated carbide inserts, Proceedings of 4th & 25th International Conference AIMTDR, Kolkata, India, December (2012).

I. Mukherjee and P. K. Ray, A review of optimization techniques in metal cutting processes, Computers & Industrial Engineering, 50 (2006) 15–34.

E. Aslan, N. Camuscu and B. Bingoren, Design optimization of cutting parameters when turning hardened AISI 4140 (63 HRC) with Al2O3+TiCN mixed ceramic tool, Materials & Design, 28 (2007) 1618–1622.

H. Aouici, M. A. Yallese, B. Fnides, K. Chaoui and T. Mabrouki, Modeling and optimization of hard turning of X38CrMoV5-1 steel with CBN tool: Machining parameters effects on flank wear and surface roughness, JMST, 25 (2011) 2843–2851.

S. Saini, I. S. Ahuja and V. S. Sharma, Influence of cutting parameters on tool wear and surface roughness in hard turning of AISI H11 tool steel using ceramic tools, International J. of Precision Engineering and Manufacturing, 13 (2012) 1295–1302.

V. N. Gaitonde, S. R. Karnik, L. Figueira and J. P. Davim, Analysis of machinability during hard turning of cold work tool steel (Type: AISI D2), J. of Materials Processing Technology, 24 (2009) 1373–1382.

I. Asiltürk and H. Akkus, Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method, Measurement, 44 (2011) 1697–1704.

J. S. Dureja, V. K. Gupta, V. S. Sharma and M. Dogra, Design optimisation of flank wear and surface roughness for CBN-TiN tools during dry hard turning of hot work die steel, International J. of Machining and Machinability of Materials, 7 (2010) 129–147.

A. K. Sahoo and B. Sahoo, Performance studies of multilayer hard surface coatings (TiN/TiCN/Al2O3/TiN) of indexable carbide inserts in hard machining: Part-II (RSM, grey relational and techno economical approach), Measurement, 46 (2013) 2868–2884.

J. T. Horng, N. M. Liu and K. Y. Chiang, Investigating the machinability evaluation of Hadfield steel in the hard turning with Al2O3/TiC mixed ceramic tool based on the response surface methodology, J. of Materials Processing Technology, 208 (2008) 532–541.

R. Suresh, S. Basavarajappa, V. N. Gaitonde and G. L. Samuel, Machinability investigations on hardened AISI 4340 steel using coated carbide insert, International J. of Refractory Metals and Hard Materials, 33 (2012) 75–86.

J. P. Davim and L. Figueira, Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools using statistical techniques, Materials and Design, 28 (2007) 1186–1191.

M. C. Cakir, C. Ensarioglu and I. Demirayak, Mathematical modeling of surface roughness for evaluating the effects of cutting parameters and coating material, J. of Materials Processing Technology, 209 (2009) 102–109.

R. Quiza, L. Figueira and J. P. Davim, Comparing statistical models and artificial neural networks on predicting the tool wear in hard machining D2 AISI steel, International J. of Advanced Manufacturing Technology, 37 (2008) 641–648.

T. Ozel, Y. Karpat, L. Figueira and J. P. Davim, Modelling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts, J. of Materials Processing Technology, 189 (2007) 192–198.

TaeguTec Limited, Turning Tools, Metalworking Cutting Tools, Catalogue (2013).

P. J. Ross, Taguchi techniques for quality engineering, 2nd ed., McGraw-Hill, New York (1996).

M. C. Shaw, Metal cutting principles, 2nd ed., Oxford U. P., New York (2005).

N. Camuscu, Effect of cutting speed on the performance of Al2O3 based ceramic tools in turning nodular cast iron, Materials & Design, 27 (2006) 997–1006.

B. Fnides, H. Aouici and M. A. Yallese, Cutting forces and surface roughness in hard turning of hot work steel X38CrMoV5-1 using mixed ceramic, Mechanika, 2 (2009) 73–78.

H. A. Kishawy and M. A. Elbestawi, Tool wear and surface integrity during high-speed turning of hardened steel with polycrystalline cubic boron nitride tools, Proceedings of the Institution of Mechanical Engineers, Part B: J. of Engineering Manufacture, 215 (2001) 755–767.

S. Khamel, N. Ouelaa and K. Bouacha, Analysis and prediction of tool wear, surface roughness and cutting forces in hard turning with CBN tool, JMST, 26 (2012) 3605–3616.

B. Zou, M. Chen, C. Z. Huang and Q. L. An, Study on surface damages caused by turning NiCr20TiAl nickel-based alloy, J. of Materials Processing Technology, 209 (2009) 5802–5809.

J. Zhou, V. Bushlya, P. Avdovic and J. E. Stahl, Study of surface quality in high speed turning of Inconel 718 with uncoated and coated CBN tools, International J. of Advanced Manufacturing Technology, 58 (2011) 141–151.

D. C. Montgomery, Design and analysis of experiments, 6 ed., Wiley, New York (2004).

A. K. Sahoo and B. Sahoo, Experimental investigations on machinability aspects in finish hard turning of AISI 4340 steel using uncoated and multilayer coated carbide inserts, Measurement, 45 (2012) 2153–2165.

R. Suresh, S. Basavarajappa and G. L. Samuel, Some studies on hard turning of AISI 4340 steel using multilayer coated carbide tool, Measurement, 45 (2012) 1872–1884.

X. L. Liu, D. H. Wen, Z. J. Li, L. Xiao and F. G. Yan, Cutting temperature and tool wear of hard turning hardened bearing steel, J. of Materials Processing Technology, 129 (2002) 200–206.

R. Pavel, I. Marinescu, M. Deis and J. Pillar, Effect of tool wear on surface finish for a case of continuous and interrupted hard turning, J. of Materials Processing Technology, 170 (2005) 341–349.

M. Elbah, M. A. Yallese, H. Aouici, T. Mabrouki and J. F. Rigal, Comparative assessment of wiper and conventional ceramic tools on surface roughness in hard turning AISI 4140 steel, Measurement, 46 (2013) 3041–3056.

M. A. Yallese, K. Chaoui, N. Zeghib, L. Boulanouar and J. F Rigal, Hard machining of hardened bearing steel using cubic boron nitride tool, J. of Materials Processing Technology, 209 (2009) 1092–1104.

W. Grzesik, Influence of tool wear on surface roughness in hard turning using differently shaped ceramic tools, Wear, 265 (2008) 327–335.

A. K. Sood, R. K. Ohdar and S. S. Mahapatra, Experimental investigation and empirical modelling of FDM Process for compressive strength improvement, J. of Advanced Research, 3 (2012) 81–90.