Study of lattice strains in magnesium alloy AZ31 based on a large strain elastic-viscoplastic self-consistent polycrystal model

Agnew, 2005, Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B, Int. J. Plast, 21, 1161, 10.1016/j.ijplas.2004.05.018 Agnew, 2001, Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y, Acta Mater., 49, 4277, 10.1016/S1359-6454(01)00297-X Agnew, 2006, Validating a polycrystal model for the elastoplastic response of magnesium alloy AZ31 using in situ neutron diffraction, Acta Mater., 54, 4841, 10.1016/j.actamat.2006.06.020 Anand, 1994, The process of shear-band formation in plane-strain compression of FCC metals – effects of crystallographic texture, Mech. Mater., 17, 223, 10.1016/0167-6636(94)90062-0 Asaro, 1985, Texture development and strain hardening in rate dependent polycrystals, Acta Metall. Mater., 33, 923, 10.1016/0001-6160(85)90188-9 Aydiner, 2009, Evolution of stress in individual grains and twins in a magnesium alloy aggregate, Phys. Rev. B, 80, 024113, 10.1103/PhysRevB.80.024113 Bell, 1957, The dynamics of twinning and the interrelation of slip and twinning in zinc crystals, Proc. Roy. Soc. London, A239, 494, 10.1098/rspa.1957.0058 Beyerlein, 2011, Effect of microstructure on the nucleation of deformation twins in polycrystalline high-purity magnesium: a multiscale modeling study, J. Mech. Phys. Solids, 59, 988, 10.1016/j.jmps.2011.02.007 Brown, 2005, Internal strain and texture evolution during deformation twinning in magnesium, Mater. Sci. Eng., A399, 1, 10.1016/j.msea.2005.02.016 Chin, 1969, Accommodation of constrained deformation in f.c.c. metals by slip and twinning, Proc. Roy. Soc. London, A309, 433, 10.1098/rspa.1969.0051 Clausen, 2008, Reorientation and stress relaxation due to twinning: modeling and experimental characterization for Mg, Acta Mater., 56, 2456, 10.1016/j.actamat.2008.01.057 Dawson, 2001, On the influence of crystal elastic moduli on computed lattice strains in AA-5182 following plastic straining, Mater. Sci. Eng., A313, 123, 10.1016/S0921-5093(01)00967-4 Eshelby, 1957, The determination of the elastic field of an ellipsoidal inclusion, and related problems, Proc. Roy. Soc. London, A241, 376, 10.1098/rspa.1957.0133 Gharghouri, 1999, Study of the mechanical properties of Mg-7.7at.% Al by in-situ neutron diffraction, Phil. Mag., A79, 1671, 10.1080/01418619908210386 Jain, 2007, Modeling the temperature dependent effect of twinning on the behavior of magnesium alloy AZ31B sheet, Mater. Sci. Eng., A462, 29, 10.1016/j.msea.2006.03.160 Koike, 2005, Enhanced deformation mechanisms by anisotropic plasticity in polycrystalline Mg alloys at room temperature, Metall. Mater. Trans., 36A, 1689, 10.1007/s11661-005-0032-4 Lebensohn, 1993, A self-consistent anisotropic approach for the simulation of plastic-deformation and texture development of polycrystals – application to zirconium alloys, Acta Metall. Mater., 41, 2611, 10.1016/0956-7151(93)90130-K Lebensohn, 2007, Self-consistent modelling of the mechanical behaviour of viscoplastic polycrystals incorporating intragranular field fluctuations, Phil. Mag., 87, 4287, 10.1080/14786430701432619 Macewen, 1983, The use of time-of-flight neutron-diffraction to study grain interaction stresses, Acta Metall., 31, 657, 10.1016/0001-6160(83)90082-2 Mareau, 2010, Study of internal strain evolution in Zircaloy-2 using polycrystalline models: comparison between a rate-dependent and a rate-independent formulation, Acta Mater., 58, 3313, 10.1016/j.actamat.2010.02.005 Marin, 2008, Diffraction measurements of elastic strains in stainless steel subjected to in situ biaxial loading, Acta Mater., 56, 4183, 10.1016/j.actamat.2008.04.048 Molinari, 1994, Tuning a self-consistent viscoplastic model by finite-element results. 1. Modeling, Acta Metall. Mater., 42, 2453, 10.1016/0956-7151(94)90324-7 Molinari, 1987, A self-consistent approach of the large deformation polycrystal viscoplasticity, Acta Metall., 35, 2983, 10.1016/0001-6160(87)90297-5 Molinari, 1997, On the self-consistent modeling of elastic-plastic behavior of polycrystals, Mech. Mater., 26, 43, 10.1016/S0167-6636(97)00017-3 Muransky, 2008, Investigation of deformation mechanisms involved in the plasticity of AZ31 Mg alloy: in situ neutron diffraction and EPSC modelling, Mater. Sci. Eng., A496, 14, 10.1016/j.msea.2008.07.031 Muransky, 2009, In situ neutron diffraction investigation of deformation twinning and pseudoelastic-like behaviour of extruded AZ31 magnesium alloy, Int. J. Plast, 25, 1107, 10.1016/j.ijplas.2008.08.002 Neil, 2010, Modeling lattice strain evolution at finite strains and experimental verification for copper and stainless steel using in situ neutron diffraction, Int. J. Plast., 26, 1772, 10.1016/j.ijplas.2010.03.005 Proust, 2009, Modeling the effect of twinning and detwinning during strain-path changes of magnesium alloy AZ31, Int. J. Plast., 25, 861, 10.1016/j.ijplas.2008.05.005 Simmons, 1971 Thompson, 1952, Twin formation, in cadmium, Phil. Mag., 43, 422, 10.1080/14786440408520175 Tomé, 1984, The relation between macroscopic and microscopic strain-hardening in FCC polycrystals, Acta Metall., 32, 1637, 10.1016/0001-6160(84)90222-0 Tomé, 1991, A model for texture development dominated by deformation twinning – application to zirconium alloys, Acta Metall. Mater., 39, 2667, 10.1016/0956-7151(91)90083-D Turner, 1994, A study of residual-stresses in zircaloy-2 with rod texture, Acta Metall. Mater., 42, 4143, 10.1016/0956-7151(94)90191-0 Wang, 2008, Macroscopic elastic properties of regular lattices, J. Mech. Phys. Solids, 56, 3459, 10.1016/j.jmps.2008.08.011 Wang, 2010, Evaluation of self-consistent crystal plasticity models for magnesium alloy AZ31B sheet, Int. J. Solids Struct., 47, 2905, 10.1016/j.ijsolstr.2010.06.016 Wang, 2010, Effects of basal texture on mechanical behaviour of magnesium alloy AZ31B sheet, Mater. Sci. Eng., A527, 3588, 10.1016/j.msea.2010.02.050 Wang, 2010, On the role of the constitutive model and basal texture on the mechanical behavior of magnesium alloy AZ31B sheet, J. Zhejiang Univ.-Sci., A11, 744, 10.1631/jzus.A1000107 Wang, 2010, A finite strain elastic-viscoplastic self-consistent model for polycrystalline materials, J. Mech. Phys. Solids, 58, 594, 10.1016/j.jmps.2010.01.004 Wang, 2011, On crystal plasticity formability analysis for magnesium alloy sheets, Int. J. Solids Struct., 48, 1000, 10.1016/j.ijsolstr.2010.12.004 Wu, 2004, Analysis of surface roughening in AA6111 automotive sheet, Acta Mater., 52, 1785, 10.1016/j.actamat.2003.12.039 Wu, 2004, A mesoscopic approach for predicting sheet metal formability, Modell. Simul. Mater. Sci. Eng., 12, 511, 10.1088/0965-0393/12/3/011 Wu, 2007, Effects of spatial grain orientation distribution and initial surface topography on sheet metal necking, Int. J. Plast., 23, 1084, 10.1016/j.ijplas.2006.11.005 Xu, 2008, Modeling lattice strain evolution during uniaxial deformation of textured Zircaloy-2, Acta Mater., 56, 3672, 10.1016/j.actamat.2008.04.019