Study of kerf features on CFRP/UNS A97075 stacks machined by AWJM

Phapale, 2016, «Delamination Characterization and Comparative Assessment of Delamination Control Techniques in Abrasive Water Jet Drilling of CFRP», Procedia Manufacturing, 5, 521, 10.1016/j.promfg.2016.08.043 Hejjaji, 2017, «Surface and machining induced damage characterization of abrasive water jet milled carbon/epoxy composite specimens and their impact on tensile behavior», Wear, 376-377, 1356, 10.1016/j.wear.2017.02.024 Bazli, 2019, «Effect of thickness and reinforcement configuration on flexural and impact behaviour of GFRP laminates after exposure to elevated temperatures», Composites Part B: Engineering, 157, 76, 10.1016/j.compositesb.2018.08.054 Gómez-Parra, 2013, «Analysis of the evolution of the Built-Up Edge and Built-Up Layer formation mechanisms in the dry turning of aeronautical aluminium alloys», Wear, 302, 1209, 10.1016/j.wear.2012.12.001 D’Orazio, 2017, «Tool wear and hole quality in drilling of CFRP/AA7075 stacks with DLC and nanocomposite TiAlN coated tools», Journal of Manufacturing Processes, 30, 582, 10.1016/j.jmapro.2017.10.019 Bañón, 2017, «ScienceDirect Preliminary Study of the Dry Drilling Process of CFRP / UNS A92024 Stacks held together by Adhesives», 00, 28 F. Bañon, A. Sambruno, S. Fernandez-vidal, y S. R. Fernandez-vidal, «One-Shot Drilling Analysis of Stack CFRP / UNS A92024 Bonding by Adhesive», pp. 1-18, 2018. Unai, 2017, De La Calle Marcaide, «Taladrado De Materiales Compuestos: Problemas, Prácticas Recomendadas y Técnicas Avanzadas», Dyna Ingenieria e Industria, 92, 188 Mayuet, 2015, «SOM/SEM based Characterization of Internal Delaminations of CFRP Samples Machined by AWJM», Procedia Engineering, 132, 693, 10.1016/j.proeng.2015.12.549 Zitoune, 2012, «Influence of machining parameters and new nano-coated tool on drilling performance of CFRP/Aluminium sandwich», Composites Part B: Engineering, 43, 1480, 10.1016/j.compositesb.2011.08.054 Kumanduri, 1997, «Machining of fiber reinforced composites», Machining Science and Technology, 1, 113, 10.1080/10940349708945641 Alberdi, 2010, Effect of process parameter on the kerf geometry in abrasive water jet milling, The International Journal of Advanced Manufacturing Technology, 51, 467, 10.1007/s00170-010-2662-y Hashish, M., «Waterjet Applications in the Automotive Industry», Proceedings of the 7th Pacific Rim international Conference on waterjetting Technology, Jeju, Korea, 2003. Boud, 2010, «Abrasive waterjet cutting of a titanium alloy: The influence of abrasive morphology and mechanical properties on workpiece grit embedment and cut quality», Journal of Materials Processing Technology, 210, 2197, 10.1016/j.jmatprotec.2010.08.006 Alberdi, 2013, «Composite Cutting with Abrasive Water Jet», Procedia Engineering, 63, 421, 10.1016/j.proeng.2013.08.217 Shukla, 2017, «Experimentation investigation of abrasive water jet machining parameters using Taguchi and Evolutionary optimization techniques», Swarm and Evolutionary Computation, 32, 167, 10.1016/j.swevo.2016.07.002 Alberdi, 2016, «An experimental study on abrasive waterjet cutting of CFRP/Ti6Al4V stacks for drilling operations», The International Journal of Advanced Manufacturing Technology, 86, 691, 10.1007/s00170-015-8192-x A. Gnanavelbabu, P. Saravanan, K. Rajkumar, y S. Karthikeyan, «Experimental Investigations on Multiple Responses in Abrasive Waterjet Machining of Ti-6Al-4V Alloy», Materials Today: Proceedings, vol. 5, n.o 5, pp. 13413-13421, 2018. Mm, 2018, «Kerf taper and delamination damage minimization of FRP hybrid composites under abrasive water-jet machining», International Journal of Advanced Manufacturing Technology, 94, 1727, 10.1007/s00170-016-9669-y Gupta, 2014, «Minimization of Kerf Taper Angle and Kerf Width Using Taguchi’s Method in Abrasive Water Jet Machining of Marble», Procedia Materials Science, 6, 140, 10.1016/j.mspro.2014.07.017 Unde, 2015, «Experimental Investigations into Abrasive Waterjet Machining of Carbon Fiber Reinforced Plastic», Journal of Composites, 2015, 1, 10.1155/2015/971596 Dhanawade, 2017, «Experimental study of delamination and kerf geometry of carbon epoxy composite machined by abrasive water jet», Journal of Composite Materials, 51, 3373, 10.1177/0021998316688950 Ruiz-Garcia, 2018, Influence of Abrasive Waterjet Parameters on the Cutting and Drilling of CFRP/UNS A97075 and UNS A97075/CFRP Stacks, Materials, 12, 107, 10.3390/ma12010107 Peng, 2013, «Galvanic corrosion property of contacts between carbon fiber cloth materials and typical metal alloys in an aggressive environment», Surface and Coatings Technology, 215, 85, 10.1016/j.surfcoat.2012.08.098 Walker, 2014, «Electrochemical characteristics of a carbon fibre composite and the associated galvanic effects with aluminium alloys», Applied Surface Science, 314, 233, 10.1016/j.apsusc.2014.06.072