Study of junction flows in louvered fin round tube heat exchangers using the dye injection technique

Webb, 1980, Air-side heat transfer in finned tube heat exchangers, Heat Transfer Engineering, 1, 33, 10.1080/01457638008939561 Mon, 2004, Numerical study of fin-spacing effects in annular-finned tube heat exchangers, International Journal of Heat and Mass Transfer, 47, 1953, 10.1016/j.ijheatmasstransfer.2003.09.034 Huisseune, 2010, thermal hydraulic study of a single row heat exchanger with helically finned tubes, Journal of Heat Transfer, 132, 061801, 10.1115/1.4000706 Wang, 2002, Flow visualization of annular and delta winlet vortex generators in fin-and-tube heat exchanger application, International Journal of Heat and Mass Transfer, 45, 3803, 10.1016/S0017-9310(02)00085-6 Shah, 2003 Jacobi, 1995, Heat transfer surface enhancement through the use of longitudinal vortices: a review of recent progress, Experimental Thermal and Fluid Science, 11, 295, 10.1016/0894-1777(95)00066-U Achaichia, 1988, Heat transfer and pressure drop characteristics of flat tube and louvered plate fin surfaces, Experimental Thermal and Fluid Science, 1, 147, 10.1016/0894-1777(88)90032-5 Zhang, 2003, Flow efficiency in multi-louvered fins, International Journal of Heat and Mass Transfer, 46, 1737, 10.1016/S0017-9310(02)00482-9 DeJong, 2003, Localized flow and heat transfer interactions in louvered fin arrays, International Journal of Heat and Mass Transfer, 46, 443, 10.1016/S0017-9310(02)00292-2 Wang, 1999, Heat transfer and friction correlation for compact louvered fin-and-tube heat exchangers, International Journal of Heat and Mass Transfer, 42, 1945, 10.1016/S0017-9310(98)00302-0 Cui, 2002, Computations of flow and heat transfer in a three-dimensional multilouvered fin geometry, International Journal of Heat and Mass Transfer, 45, 5007, 10.1016/S0017-9310(02)00201-6 Simpson, 2001, Junction flows, Annual Review of Fluid Mechanics, 33, 415, 10.1146/annurev.fluid.33.1.415 Sung, 1995, Local convective mass transfer on circular cylinder with transverse annular fins in crossflow, International Journal of Heat and Mass Transfer, 39, 1093, 10.1016/0017-9310(95)00190-5 Watel, 1999, Influence of flow velocity and fin spacing on the forced convective heat transfer from an annular-finned tube, JSME International Journal Series B, 42, 56, 10.1299/jsmeb.42.56 Romero-Méndez, 2000, Effect of fin spacing on convection in a plate fin and tube heat exchanger, International Journal of Heat and Mass Transfer, 43, 39, 10.1016/S0017-9310(99)00120-9 U. Ahrend, M. Buchholz, R. Schmidt, J. Köhler, Investigation of the relation between turbulent fluid flow and local heat transfer in fin-and-tube heat exchangers, in: Proceedings of the 13th International Heat Transfer Conference, Sydney, Australia, 2006. Bougeard, 2007, Infrared thermography investigation of local heat transfer in a plate fin and two-tube rows assembly, International Journal of Heat and Fluid Flow, 28, 988, 10.1016/j.ijheatfluidflow.2007.01.008 Kim, 2002, Microscopic phenomena and macroscopic evaluation of heat transfer from plate fins/circular tube assembly using naphthalene sublimation technique, International Journal of Heat and Mass Transfer, 45, 3397, 10.1016/S0017-9310(02)00047-9 Sahin, 2008, Horseshoe vortex studies in the passage of a model plate-fin-and-tube heat exchanger, International Journal of Heat and Fluid Flow, 29, 340, 10.1016/j.ijheatfluidflow.2007.06.005 Lozza, 2001, An experimental investigation of heat transfer and friction losses of interrupted and wavy fins for fin-and-tube heat exchangers, International Journal of Refrigeration-Revue Internationale Du Froid, 24, 409, 10.1016/S0140-7007(00)00035-9 Qi, 2007, Parametric study on the performance of a heat exchanger with corrugated louvered fins, Applied Thermal Engineering, 27, 539, 10.1016/j.applthermaleng.2006.06.015 Dong, 2007, Heat transfer and pressure drop correlations for the multi-louvered fin compact heat exchangers, Energy Conversion and Management, 48, 1506, 10.1016/j.enconman.2006.11.023 A.P. Byrkin, S.P. Ponomaryov, V.S. Ponomaryova, A.P. Filatov, Aerodynamic Design of Nozzles for Subsonic and Transonic Wind Tunnels, in: Proceedings of AGARD Conference, Aerodynamics of Wind Tunnel Circuits and Their Components, Moscow, Russia, 1996. Rouse, 1949, Cavitation-free inlets and contractions, Mechanical Engineering, 71, 213 Mehta, 1979, Design rules for small low speed wind tunnels, technical notes, Aeronautical Journal of the Royal Aeronautical Society, 443 O.A. León Patiño, Optimization of Heat Sinks by Computational Flow Dynamics Techniques, Ph.D. Dissertation, Ghent University, Belgium, 2003. N. Denys, D. Deserranno, Stromingsonderzoek met Laser-Doppler Anemometrie in een vloeistoftunnel, Master Thesis, Ghent University, Belgium, 2000 (in Dutch). DeJong, 2003, Flow, heat transfer, and pressure drop in the near-wall region of louvered-fin arrays, Experimental Thermal and Fluid Science, 27, 237, 10.1016/S0894-1777(02)00224-8 Kim, 2008, Air-side performance of louver-finned flat aluminum heat exchangers at a low velocity region, International Journal of Heat and Mass Transfer, 44, 1127, 10.1007/s00231-007-0346-4 Moffat, 1988, Describing the uncertainties in experimental results, Experimental Thermal and Fluid Science, 1, 3, 10.1016/0894-1777(88)90043-X Revised Release on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam (IAPWS-IF97), 2007. IAPWS Release on the IAPWS Formulation 1995 for the Thermodynamic Properties of Ordinary Water Substance for General and Scientific Use (IAPWS-95), 1996. Schlichting, 2003 Kim, 2003, Effect of tube alignment on the heat/mass transfer from a plate fin and two-tube assembly: naphthalene sublimation results, International Journal of Heat and Mass Transfer, 46, 3051, 10.1016/S0017-9310(03)00091-7 Baker, 1979, The laminar horseshoe vortex, Journal of Fluid Mechanics, 95, 347, 10.1017/S0022112079001506 T’Joen, 2009, Flow visualisation in inclined louvered fins, Experimental and Thermal Fluid Science, 33, 664, 10.1016/j.expthermflusci.2009.01.003