Study of interface chemistry between the carrier-transporting layers and their influences on the stability and performance of organic solar cells

Aissa B, Nedil M, Kroeger J, Ali A, Isaifan RJ, Essehli R, Mahmoud KA (2018) Graphene nanoplatelet doping of P3HT: PCBM photoactive layer of bulk heterojunction organic solar cells for enhancing performance. Nanotechnology. https://doi.org/10.1088/1361-6528/aaa62d Alemu D, Wei H-Y, Ho K-C, Chu C-W (2012) Highly conductive PEDOT: PSS electrode by simple film treatment with methanol for ITO-free polymer solar cells. Energy Environ Sci 5:9662–9671 Balis N, Stratakis E, Kymakis E (2016) Graphene and transition metal dichalcogenide nanosheets as charge transport layers for solution processed solar cells. Mater Today 19:580–594 Bin H et al (2016) 11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor. Nat Commun 7:13651 Brütting W (2006) Introduction to the physics of organic semiconductors. Wiley, Hoboken Chang SH, Chiang C-H, Kao F-S, Tien C-L, Wu C-G (2014) Unraveling the enhanced electrical conductivity of PEDOT: PSS thin films for ITO-free organic photovoltaics. IEEE Photonics J 6:1–7 Chen L, Du D, Sun K, Hou J, Ouyang J (2014) Improved efficiency and stability of polymer solar cells utilizing two-dimensional reduced graphene oxide: graphene oxide nanocomposites as hole-collection material. ACS Appl Mater Interfaces 6:22334–22342 Cheng P, Li Y, Zhan X (2013) A DMF-assisted solution process boosts the efficiency in P3HT: PCBM solar cells up to 5. 31%. Nanotechnology 24:484008 Cheng J, Xie F, Liu Y, Wei E, Li X, Yang Y, Choy WC (2015) Efficient hole transport layers with widely tunable work function for deep HOMO level organic solar cells. J Mater Chem A 3:23955–23963 Choi JW, Han MG, Kim SY, Oh SG, Im SS (2004) Poly (3, 4-ethylenedioxythiophene) nanoparticles prepared in aqueous DBSA. Solut Synth Metals 141:293–299 Cohen A et al (2016) Highly thermostable and insensitive energetic hybrid coordination polymers based on graphene Oxide–Cu (II). Complex Chem Mater 28:6118–6126 da Silva WJ, Yusoff ARBM., Jang J (2013) GO: PEDOT: PSS for high-performance green phosphorescent organic light-emitting diode. IEEE Electron Device Lett 34:1566–1568 Deckman I, Moshonov M, Obuchovsky S, Brener R, Frey GL (2014) Spontaneous interlayer formation in OPVs by additive migration due to additive–metal interactions. J Mater Chem A 2:16746–16754 Diez Pascual AM, Luceño Sánchez JA, Peña Capilla R, Garcia Diaz P (2018) Recent developments in graphene/polymer nanocomposites for application in polymer. Solar Cells Polymers 10:217 Fabretto M, Zuber K, Hall C, Murphy P, Griesser HJ (2009) The role of water in the synthesis and performance of vapour phase polymerised PEDOT electrochromic devices. J Mater Chem 19:7871–7878 Ferrari AC (2007) Raman spectroscopy of graphene and graphite: disorder, electron–phonon coupling, doping and nonadiabatic effects. Solid State Commun 143:47–57 Gallasch T, Stockhoff T, Baither D, Schmitz G (2011) Ion beam sputter deposition of V2O5 thin films. J Power Sour 196:428–435 Gao Y, Yip H-L, Hau SK, O’Malley KM, Cho NC, Chen H, Jen AK-Y (2010) Anode modification of inverted polymer solar cells using graphene oxide. Appl Phys Lett 97:251 Gilot J, Barbu I, Wienk MM, Janssen RA (2007) The use of ZnO as optical spacer in polymer solar cells: theoretical and experimental study. Appl Phys Lett 91:113520 Grzyb B, Gryglewicz S, Śliwak A, Diez N, Machnikowski J, Gryglewicz G (2016) Guanidine, amitrole and imidazole as nitrogen dopants for the synthesis of N-graphenes. RSC Adv 6:15782–15787 He Z, Zhong C, Su S, Xu M, Wu H, Cao Y (2012) Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure. Nat Photonics 6:591 He X et al. (2015) Photogenerated intrinsic free carriers in small-molecule organic semiconductors visualized by ultrafast spectroscopy. Sci Rep 5:17076 Helander M, Wang Z, Greiner M, Liu Z, Lian K, Lu Z (2009) The effect of UV ozone treatment on poly (3, 4-ethylenedioxythiophene): poly (styrenesulfonate). Appl Phys Lett 95:280 Hilal M, Han JI (2018) Significant improvement in the photovoltaic stability of bulk heterojunction organic solar cells by the molecular level interaction of graphene oxide with a PEDOT: PSS composite hole transport layer. Sol Energy 167:24–34 Huang J-H et al (2010) Using a low temperature crystallization process to prepare anatase TiO 2 buffer layers for air-stable inverted polymer solar cells. Energy Environ Sci 3:654–658 Irwin MD, Buchholz DB, Hains AW, Chang RP, Marks TJ (2008) p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells. Proc Natl Acad Sci 105:2783–2787 Jeon Y-J, Yun J-M, Kim D-Y, Na S-I, Kim S-S (2014) Moderately reduced graphene oxide as hole transport layer in polymer solar cells via thermal assisted spray process. Appl Surf Sci 296:140–146 Ji T, Tan L, Hu X, Dai Y, Chen Y (2015) A comprehensive study of sulfonated carbon materials as conductive composites for polymer solar cells. Phys Chem Chem Phys 17:4137–4145 Jiang CY, Sun XW, Zhao DW, Kyaw AKK, Li YN (2010) Low work function metal modified ITO as cathode for inverted polymer solar cells. Sol Energy Mater Sol Cells 94:1618–1621 Jørgensen M, Norrman K, Krebs FC (2008) Stability/degradation of polymer solar cells. Solar Energy Mater Solar Cells 92:686–714 Kakavelakis G, Konios D, Stratakis E, Kymakis E (2014) Enhancement of the efficiency and stability of organic photovoltaic devices via the addition of a lithium-neutralized graphene oxide electron-transporting layer. Chem Mater 26:5988–5993 Kakavelakis G, Maksudov T, Konios D, Paradisanos I, Kioseoglou G, Stratakis E, Kymakis E (2017) Efficient and highly air stable planar inverted Perovskite solar cells with reduced Graphene oxide doped PCBM electron transporting layer. Adv Energy Mater 7:1602120. https://doi.org/10.1002/aenm.201602120 Kanwat A, Jang J (2016) Enhanced organic photovoltaic properties via structural modifications in PEDOT: PSS due to graphene oxide doping. Mater Res Bull 74:346–352 Kim TY, Park CM, Kim JE, Suh KS (2005) Electronic, chemical and structural change induced by organic solvents in tosylate-doped poly (3, 4-ethylenedioxythiophene)(PEDOT-OTs). Synth Metals 149:169–174 Kim YH, Sachse C, Machala ML, May C, Müller-Meskamp L, Leo K (2011) Highly conductive PEDOT: PSS electrode with optimized solvent and thermal post-treatment for ITO-free organic solar cells. Adv Func Mater 21:1076–1081 Kim YG, Kwon KC, Van Le Q, Hong K, Jang HW, Kim SY (2016) Atomically thin two-dimensional materials as hole extraction layers in organolead halide perovskite photovoltaic cells. J Power Sour 319:1–8 Kumar A, Singh P, Kulkarni N, Kaur D (2008) Structural and optical studies of nanocrystalline V2O5 thin films. Thin Solid Films 516:912–918 Kyaw AKK, Wang DH, Gupta V, Zhang J, Chand S, Bazan GC, Heeger AJ (2013) Efficient solution-processed small-molecule solar cells with inverted. Struct Adv Mater 25:2397–2402 Lee D-Y, Na S-I, Kim S-S (2016) Graphene oxide/PEDOT: PSS composite hole transport layer for efficient and stable planar heterojunction perovskite solar cells. Nanoscale 8:1513–1522 Li S-S, Tu K-H, Lin C-C, Chen C-W, Chhowalla M (2010) Solution-processable graphene oxide as an efficient hole transport layer in polymer solar cells. ACS Nano 4:3169–3174 Li D, Cui J, Li H, Huang D, Wang M, Shen Y (2016) Graphene oxide modified hole transport layer for CH3NH3PbI3 planar heterojunction solar cells. Sol Energy 131:176–182 Liu J, Xue Y, Gao Y, Yu D, Durstock M, Dai L (2012) Hole and electron extraction layers based on graphene oxide derivatives for high-performance bulk heterojunction solar cells. Adv Mater 24:2228–2233 Lonkar SP, Raquez J-M, Dubois P (2015) One-pot microwave-assisted synthesis of graphene/layered double hydroxide (LDH) nanohybrids. Nano-Micro Lett 7:332–340 Maibach J, Mankel E, Mayer T, Jaegermann W (2013) The band energy diagram of PCBM–DH6T bulk heterojunction solar cells: synchrotron-induced photoelectron spectroscopy on solution processed DH6T: PCBM blends and in situ prepared PCBM/DH6T interfaces. J Mater Chem C 1:7635–7642 Meng L-j, Andritschky M, Dos Santos M (1993) The effect of substrate temperature on the properties of dc reactive magnetron sputtered titanium oxide films. Thin Solid Films 223:242–247 Mongstad T, Thøgersen A, Subrahmanyam A, Karazhanov S (2014) The electronic state of thin films of yttrium, yttrium hydrides and yttrium oxide. Sol Energy Mater Sol Cells 128:270–274 Murray IP et al (2011) Graphene oxide interlayers for robust, high-efficiency organic photovoltaics. J Phys Chem Lett 2:3006–3012 Ouyang J (2013) Solution-processed PEDOT: PSS films with conductivities as indium tin oxide through a treatment with mild and weak organic acids. ACS Appl Mater Interface 5:13082–13088 Palaniappan S, John A (2008) Polyaniline materials by emulsion polymerization pathway. Prog Polym Sci 33:732–758 Park H, Lee SH, Kim FS, Choi HH, Cheong IW, Kim JH (2014) Enhanced thermoelectric properties of PEDOT: PSS nanofilms by a chemical dedoping process. J Mater Chem A 2:6532–6539 Pingree LS, MacLeod BA, Ginger DS (2008) The changing face of PEDOT: PSS films: substrate, bias, and processing effects on vertical charge transport. J Phys Chem C 112:7922–7927 Po R, Carbonera C, Bernardi A, Camaioni N (2011) The role of buffer layers in polymer solar cells. Energy Environ Sci 4:285–310 Qu S, Li M, Xie L, Huang X, Yang J, Wang N, Yang S (2013) Noncovalent functionalization of graphene attaching [6, 6]-phenyl-C61-butyric acid methyl ester (PCBM) and application as electron extraction layer of polymer solar cells. ACS Nano 7:4070–4081 Rafique S, Abdullah SM, Shahid MM, Ansari MO, Sulaiman K (2017) Significantly improved photovoltaic performance in polymer bulk heterojunction solar cells with graphene oxide/PEDOT: PSS double decked hole transport layer. Sci Rep 7:39555. https://doi.org/10.1038/srep39555 Roy A, Park SH, Cowan S, Tong MH, Cho S, Lee K, Heeger AJ (2009) Titanium suboxide as an optical spacer in polymer solar cells. Appl Phys Lett 95:179 Shrotriya V, Li G, Yao Y, Chu C-W, Yang Y (2006) Transition metal oxides as the buffer layer for polymer photovoltaic cells. Appl Phys Lett 88:073508 Singh E, Nalwa HS (2015) Stability of graphene-based heterojunction solar cells. Rsc Adv 5:73575–73600 Singh SP, Sharma G (2014) Near infrared organic semiconducting materials for bulk heterojunction and dye-sensitized Solar Cells. Chem Record 14:419–481 Steim R, Choulis SA, Schilinsky P, Brabec CJ (2008) Interface modification for highly efficient organic photovoltaics. Appl Phys Lett 92:72 Sun Y, Seo JH, Takacs CJ, Seifter J, Heeger AJ (2011) Inverted polymer solar cells integrated with a low-temperature-annealed sol-gel-derived ZnO film as an electron transport layer. Adv Mater 23:1679–1683 Sun X et al (2017) Halide anion–fullerene π noncovalent interactions: n-doping and a halide anion migration mechanism in p–i–n perovskite solar cells. J Mater Chem A 5:20720–20728 Wang S, Yu D, Dai L, Chang DW, Baek J-B (2011) Polyelectrolyte-functionalized graphene as metal-free electrocatalysts for oxygen reduction. ACS Nano 5:6202–6209 Wang Z et al (2014) Enhancing lithium–sulphur battery performance by strongly binding the discharge products on amino-functionalized reduced graphene oxide. Nat Commun 5:5002 Wang F, Tan ZA, Li Y (2015) Solution-processable metal oxides/chelates as electrode buffer layers for efficient and stable polymer solar cells. Energy Environ Sci 8:1059–1091 Xiao B, Wu H, Cao Y (2015) Solution-processed cathode interfacial layer materials for high-efficiency polymer solar cells. Mater Today 18:385–394 Xie J et al (2017) Self-organized fullerene interfacial layer for efficient and low-temperature processed planar perovskite solar cells with high UV-light stability. Adv Sci 4:1700018. https://doi.org/10.1002/advs.201700018 Xu JY, Liu J, Li KD, Miao L, Tanemura S (2015) Novel PEPA-functionalized graphene oxide for fire safety enhancement of polypropylene. Sci Technol Adv Mater 16:025006 Yeo J-S et al (2015) Highly efficient and stable planar perovskite solar cells with reduced graphene oxide nanosheets as electrode interlayer. Nano Energy 12:96–104 Yin Z, Zheng Q, Chen S-C, Cai D (2013) Interface control of semiconducting metal oxide layers for efficient and stable inverted polymer solar cells with open-circuit voltages over 1.0 volt. ACS Appl Mater Interf 5:9015–9025 Yin Z, Wei J, Zheng Q (2016a) Interfacial materials for organic solar cells: recent advances and perspectives. Adv Sci 3:1500362. https://doi.org/10.1002/advs.201500362 Yin Z, Zheng Q, Chen SC, Cai D, Ma Y (2016b) Controllable ZnMgO electron-transporting layers for long-term stable organic solar cells with 8.06% efficiency after one-year storage. Adv Energy Mater 6:1501493. https://doi.org/10.1002/aenm.201501493 Yu D, Yang Y, Durstock M, Baek J-B, Dai L (2010) Soluble P3HT-grafted graphene for efficient bilayer—heterojunction photovoltaic devices. ACS Nano 4:5633–5640 Yu D, Nagelli E, Naik R, Dai L (2011) Asymmetrically functionalized graphene for photodependent diode rectifying behavior. Angew Chem Int Ed 50:6575–6578 Yu Y-H, Lin Y-Y, Lin C-H, Chan C-C, Huang Y-C (2014) High-performance polystyrene/graphene-based nanocomposites with excellent anti-corrosion properties. Polymer Chem 5:535–550 Zhang J, Xu Y, Liu Z, Yang W, Liu J (2015) A highly conductive porous graphene electrode prepared via in situ reduction of graphene oxide using Cu nanoparticles for the fabrication of high performance supercapacitors. RSC Adv 5:54275–54282 Zhang W et al (2017) Thermal stability-enhanced and high-efficiency planar perovskite solar cells with interface passivation. ACS Appl Mater Interf 9:38467–38476 Zhao Z et al (2015) Improving the conductivity of PEDOT: PSS hole transport layer in polymer solar cells via copper (II) bromide salt doping. ACS Appl Mater Interf 7:1439–1448