Study of dual-phase drive synchronization method and temperature measurement algorithm for measuring external surface temperatures of ethylene cracking furnace tubes
Tóm tắt
Currently, the manual method using hand-held infrared temperature measurement instruments for measuring temperatures on the external surfaces of ethylene cracking furnace tubes is highly subjective and is affected by a number of prominent issues, such as the high temperature working environments, which leads to low efficiency and poor measurement accuracy. Hence, an automatic temperature measurement system based on infrared light is designed and realized. In the system, a dual-phase drive synchronization method is proposed to rotate the thermodetector during horizontal movements, thus realizing automatic batch temperature measurements of the furnace tubes. Moreover, a temperature processing algorithm is developed to automatically identify furnace wall and tube surface temperatures, filter out abnormal temperatures and select only high-quality temperature measurements prior to calculating the final result. Real temperature measurement experiments demonstrated that the dual-phase drive temperature measurement system and temperature processing method are effective and efficient. Compared with the traditional manual way, temperatures obtained using the proposed system are more stable and accurate.
Tài liệu tham khảo
Khodamorad SH, Fatmehsari DH, Rezaie H, Sadeghipour A (2012) Analysis of ethylene cracking furnace tubes. Eng Fail Anal 21:1–8
Pregowski P, Goleniewski G, Komosa W, Zwolenik S (2005) Applications of dynamic IR thermography in studying operation of heaters. Proc SPIE 5782:83–92
Nishiyama Y, Semba H, Ogawa K, Sawaragi Y, Yamadera Y, Kinomura S (2002) A new carburization resistant alloy for ethylene cracking furnace tubes. In: Conference: CORROSION 2002, 7-11 April. Denver, Colorado
Geng LY, Gong JM, Qin XY, Shen LM (2012) Modeling of carburization and thermal stress analysis for ethylene cracking furnace tube. Mater Sci Forum 704:1136–1140
Han Y, Geng Z, Wang Z, Mu P (2016) Performance analysis and optimal temperature selection of ethylene cracking furnaces: a data envelopment analysis cross-model integrated analytic hierarchy process. J Anal Appl Pyrol 122:35–44
Jin YK, Li JL, Du WL, Wang ZL, Qian F (2013) Outlet temperature correlation and prediction of transfer line exchanger in an industrial steam ethylene pyrolysis process. Chinese J Chem Eng 21(4):388–394
Zhou HC, Han SD (2003) Simultaneous reconstruction of temperature distribution, absorptivity of wall surface and absorption coefficient of medium in a 2-D furnace system. Int J Heat Mass Tran 46:2645–2653
Masoumi ME, Sadrameli SM, Towfighi J, Niaei A (2006) Simulation, optimization and control of a thermal cracking furnace. Energy 31(4):516–527
Lou C, Li WH, Zhou HC, Salinas CT (2011) Experimental investigation on simultaneous measurement of temperature distributions and radiative properties in an oil-fired tunnel furnace by radiation analysis. Int J Heat Mass Tran 54:1–8
Cheng Q, Zhang X, Wang Z, Zhou H (2014) Simultaneous measurement of three-dimensional temperature distributions and radiative properties based on radiation image processing technology in a gas-fired pilot tubular furnace. Heat Transfer Eng 35(6–8):770–779
Zheng S, Zhang X, Qi C, Zhou H (2015) Modeling of heat transfer and pyrolysis reactions in ethylene cracking furnace based on 3-D combustion monitoring. Int J Therm Sci 94:28–36
Peng ZP (2015) Temperature discrimination method and measuring device of the furnace tube surface and the furnace wall. China Patent no 201410666748.5