Study of Tool Wear Mechanisms and Mathematical Modeling of Flank Wear During Machining of Ti Alloy (Ti6Al4V)

B. Wang, X. Ai, Liu, Z.L. Liu, J.G. Liu, Wear mechanism of PVD TiAlN coated cemented carbide tool in dry turning titanium alloy TC4. Adv. Mater. Res. 652–654, 2200–2204 (2013)

S. Joshi, P. Pawar, S. Joshi, A. Tewari, Deformation mechanism in orthogonal machining of titanium alloys with varying α–β phase fraction. in 25th AIMTDR (2012), pp. 311–315.

K.A. Venugopal, S. Paul, A.B. Chattopadhyay, Tool wear in cryogenic turning of Ti6Al4V alloy. Cryogenic 47, 12–18 (2007)

A. Jawaid, C.H. Che-haron, A. Abdullah, Tool wear characteristics in turning of titanium alloy Ti-6246. J. Mater. Process. Technol. 92–93, 329–334 (1999)

D. Singh, P.V. Rao, Flank wear prediction of ceramic tools in hard turning. Int. J. Adv. Manuf. Technol. 50, 479–493 (2010)

T. Wong, W. Kim, P. Kwon, Experimental support for a model-based prediction of tool wear. Wear 257, 790–798 (2004)

S.K. Choudhury, P. Srinivas, P, Tool wear prediction in turning. J. Mater. Process. Technol. 153–154, 276–280 (2004)

P.W. Marksberry, I.S. Jawahir, A comprehensive tool-wear/tool-life performance model in the evaluation of NDM (near dry machining) for sustainable manufacturing. Int. J. Manuf. Technol. Manag. 48, 878–886 (2008)

S.Y. Luo, Y.S. Liao, Y.Y. Tsai, Wear characteristics in turning high hardness alloy steel by ceramic and CBN tools. J. Mater. Process. Technol. 88, 114–121 (1999)

Y. Huang, T.G. Dawson, Tool crater wear depth modeling in CBN hard turning. Wear 258, 1455–1461 (2005)

E. Rabinowickz, L.A. Dunn, P.G. Russell, A study of abrasive wear under three body condition. Wear 4, 345–355 (1961)

B.M. Kramer, Predicted wear resistances of binary carbide coatings. J. Vac. Sci. Technol. 6, 2870–2873 (1985)

E.M. Trent, P.K. Wright, Metal cutting, 4th edn. (Butterworth-Heinemann Publications, London, 2000), p. 200

E. Rabinowickz, Friction and wear of materials, 2nd edn. (Wiley, New York, 1995)

T. Childs, K. Maekawa, T. Obikawa, Y. Yamane, Metal machining: Theory and applications, 1st edn. (Arnold Publishers, London, 2000)

Y. Huang, S.Y. Liang, Modeling of CBN tool flank wear progression in finish hard turning. J. Manuf. Sci. Eng.126(1), 98–106 (2004)

D. Jianxin, L. Jianhua, Z. Jinlong, S. Wenlong, N. Ming, Friction and wear behaviors of the PVD ZrN coated carbide in sliding wear tests and in machining processes. Wear 264, 298–307 (2008)

T. Kagnaya, C. Bohera, L. Lambert, M. Lazard, T. Cutard, Wear mechanisms of WC–Co cutting tools from high-speed tribological tests. Wear 267, 890–897 (2009)

D. Jianxin, Y. Yousheng, S. Wenlong, Diffusion wear in dry cutting of Ti6Al4V with WC/Co carbide tools. Wear 265, 1776–1783 (2008)

R. Shivpuri, J. Hua, A cobalt diffusion based model for predicting crater wear carbide tools in machining of titanium alloy. J. Manuf. Sci. Eng. 127, 136–144 (2005)

A. Bhattacharyya, Metal cutting theory and practice, 1st edn. (New Central Book Agency, Calcutta, 1984), p. 202

A. Bhatt, H. Attia, R. Vargas, V. Thomson, Wear mechanisms of WC coated and uncoated tools in finish turning of Inconel 718. Tribol. Int.43, 1113–1121 (2010)