Study and Characterization of the Dielectric Behavior of Low Linear Density Polyethylene Composites Mixed with Ground Tire Rubber Particles

Polymers - Tập 12 Số 5 - Trang 1075
Marc Marín-Genescà1, Jordi García-Amorós2, Ramon Maria Mujal-Rosas3, Lluís Massagués2, X. Colom4
1Department of Mechanical Engineering, ETSEQ-URV, Països Catalans, 26, 45002 Tarragona, Spain
2Department of Electrical Engineering, ETSE-URV, Països Catalans, 26, 45002 Tarragona, Spain
3Department of Electrical Engineering, ESEIAAT-UPC, Colom, 1, 08222 Terrassa, Spain
4Department of Chemical Engineering, ESEIAAT-UPC, Colom, 1, 08222 Terrassa, Spain

Tóm tắt

The waste rubber vulcanizate, on account of its stable, cross-linked and three-dimensional structural arrangement, is difficult to biodegrade. Thus, the ever-increasing bulk of worn-out tires is a serious environmental issue and its safe disposal is still a challenging task reported widely by the scientific community. The rubber materials, once they end their useful life, may present difficulties to be reused or recycled. At present, only one tire recycling method is used, which involves grinding and separating steel and fibers from vulcanized rubber, and then using rubber for industrial applications, such as flooring, insulation, footwear. In this paper, a new compound material is presented from a base of reused tire powder (Ground Tire Rubber: GTR) as a mixer and linear low-density polyethylene (LLDPE) as a matrix. The reused tire powder, resulting from grinding industrial processes, is separated by sieving into just one category of particle size (<200 μm) and mixed with the LLDPE in different amounts (0%, 5%, 10%, 20%, 40%, 50% and 70% GTR). Due to the good electrical properties of the LLDPE, this study’s focus is settled on the electrical behavior of the obtained composites. The test of the dielectric behavior is carried out by means of DEA test (Dynamic Electric Analysis), undertaken at a range of temperatures varying from 30 to 120 °C, and with a range of frequencies from 1 to 102, to 3·106 Hz, from which permittivity, conductivity, dielectric constant and electric modulus have been obtained. From these experimental results and their analysis, it can be drawn that the additions of different quantities of GTR to LLDPE could be used as industrial applications, such as universal electrical cable joint, filler for electrical applications or cable tray systems and cable ladder system.

Từ khóa


Tài liệu tham khảo

Myhre, 2012, Rubber Recycling: Chemistry, Processing, and Applications, Rubber Chem. Technol., 85, 408, 10.5254/rct.12.87973

Fukumori, 2002, Recycling technology of tire rubber, JSAE Rev., 23, 259, 10.1016/S0389-4304(02)00173-X

2013, Ground tyre rubber (GTR) in thermoplastics, thermosets, and rubbers, J. Mater. Sci., 48, 1, 10.1007/s10853-012-6564-2

Ikeda, Y., Kato, A., Kohjiya, S., and Nakajima, Y. (2018). Rubber Science, Springer.

Logakis, 2011, Highly conducting poly (methyl methacrylate)/carbon nanotubes composites: Investigation on their thermal, dynamic-mechanical, electrical and dielectric properties, Compos. Sci. Technol., 71, 854, 10.1016/j.compscitech.2011.01.029

Liu, 2014, Electrical conductivity behaviour of sheared poly(methyl methacrylate)/carbon black composites, Compos. Sci. Technol., 100, 99, 10.1016/j.compscitech.2014.06.005

Zhao, 2013, A comparison between strain sensing behaviors of carbon black/polypropylene and carbon nanotubes/polypropylene electrically conductive composites, Compos. A Appl. Sci. Manuf., 48, 129, 10.1016/j.compositesa.2013.01.004

Zhang, 2011, Preparation of thermoplastic vulcanizates based on waste crosslinked polyethylene and ground tire rubber through dynamic vulcanization, J. Appl. Polym. Sci., 122, 2110, 10.1002/app.34293

Rodgers, B., and Waddell, W. (2005). Tire engineering. Sci. Tech. Rubber.

Nuzaimah, M., Sapuan, S.M., Nadlene, R., and Jawaid, M. (2017). Recycling of waste rubber as fillers: A review. 2018 IOP Conf. Ser. Mater. Sci. Eng.

Sunthonpagasit, 2004, Scrap tires to crumb rubber: Feasibility analysis for processing facilities, Resour. Conserv. Recycl., 40, 281, 10.1016/S0921-3449(03)00073-9

Ramarad, 2015, Waste tire rubber in polymer blends: A review on the evolution, properties and future, Prog. Mater. Sci., 72, 100, 10.1016/j.pmatsci.2015.02.004

Fazli, A., and Rodrigue, D. (2020). Waste Rubber Recycling: A Review on the Evolution and Properties of Thermoplastic Elastomers. Materials, 13.

Aizawa, 2008, Current results and future perspectives for Japanese recycling of home electrical appliances, Resour. Conserv. Recycl., 52, 1399, 10.1016/j.resconrec.2008.07.013

Rudolph, N., Kiesel, R., and Aumnate, C. (2017). Understanding Plastics Recycling: Economic, Ecological, and Technical Aspects of Plastic Waste Handling, Carl Hanser Verlag GmbH Co. KG.

Grigore, M.E. (2017). Methods of Recycling, Properties and Applications of Recycled Thermoplastic Polymers. Recycling, 2.

Gohatre, O.K., Jaidev, K., Suresh, S.S., Biswal, M., Mohanty, S., and Nayak, S.K. (2019). Composition and Recyclability Analysis of Poly(Vinyl Chloride) Recovered from Computer Power Cables and Commercial Wires. J. Vinyl Addit. Technol.

Radeshkumar, 2002, Thermoplastic dynamic vulcanisates containing LDPE, rubber, and thermochemically reclaimed ground tyre rubber, Plast. Rubber Compos., 31, 99, 10.1179/146580102225003074

Liu, H.S., Richard, C.P., Mead, J.L., and Stacer, R.G. (2000). Development of Novel Applications for Using Recycled Rubber in Thermoplastics, Chelsea Center for Recycling and Economic Development, University of Massachusetts. Technical Research Program.

Rahhali, 2011, Dielectric and mechanical characterization of PVC composites with ground tire rubber, J. Compos. Mater., 45, 1233, 10.1177/0021998310380289

Colom, 2007, Composites reinforced with reused tyres: Surface oxidant treatment to improve the interfacial compatibility, Compos. Part A Appl. Sci. Manuf., 38, 44, 10.1016/j.compositesa.2006.01.022

Mujal, 2014, Electrical application of polyamide reinforced with old tire rubber (ground tire rubber): Dielectric, thermal, mechanical and structural properties, J. Compos. Mater., 27, 1209, 10.1177/0892705712470263

Rahhali, 2012, Dielectric, mechanical, and thermal characterization of high-density polyethylene composites with ground tire rubber, J. Thermoplast. Compos. Mater., 25, 537, 10.1177/0892705711411344

Yehia, 2004, Effect of chemically modified waste rubber powder as a filler in natural rubber vulcanizates, J. Appl. Polym. Sci., 93, 30, 10.1002/app.20349

Colom, 2018, Structural and physico-mechanical properties of natural rubber/GTR composites devulcanized by microwaves: Influence of GTR source and irradiation time, J. Compos. Mater., 52, 3099, 10.1177/0021998318761554

Mujal, 2013, Dielectric, thermal, and mechanical properties of acrylonitrile butadiene styrene reinforced with used tires, Adv. Polym. Technol., 32, E399

Ramis, 2012, Study on dielectric, mechanical and thermal properties of polypropylene (PP) composites with ground tyre rubber (GTR), Polym. Polym. Compos., 20, 755

Giri, 2012, Effect of electron beam irradiation on dynamic mechanical, thermal and morphological properties of LLDPE and PDMS rubber blends, Radiat, Phys. Chem., 81, 1930

Katbab, 2005, Thermomechanical reactive blending of silicone rubber and LLDPE: Effects of processing parameters, J. Appl. Polym. Sci., 96, 155, 10.1002/app.21138

Rigotti, 2020, Thermo-Mechanical Behavior and Hydrolytic Degradation of Linear Low-Density Polyethylene/Poly(3-hydroxybutyrate) Blends, Front. Mater., 7, 31, 10.3389/fmats.2020.00031

Osman, 2005, Tensile properties of polyethylene-layered silicate nanocomposites, Polymer, 46, 1653, 10.1016/j.polymer.2004.11.112

Ismail, 2006, Effect of waste tire dust (WTD) size on the mechanical and morphological properties of polypropylene/waste tire dust (PP/WTD) blends, Polym. Plast. Technol. Eng., 45, 463, 10.1080/03602550600553739

Markov, 2006, Electrical conductivity of carbon black/fibres filled glass-fibre-reinforced thermoplastic composites, Compos. Part A Appl. Sci. Manuf., 37, 1390, 10.1016/j.compositesa.2005.07.009

Tsangaris, 1999, The dielectric response of a polymeric three-component composite, J. Mater. Sci., 34, 2151, 10.1023/A:1004528330217

Achour, 2011, Electric Modulus Analysis of Carbon Black/Copolymer Composite Materials, Mater. Sci. Appl., 2, 1421

Boukheir, 2018, Electric Modulus Spectroscopic Studies of the Dielectric Properties of Carbon Nanotubes/Epoxy Polymer Composite Materials, J. Macromol. Sci. Part B Phys., 57, 210, 10.1080/00222348.2018.1439243

Belattar, 2010, Electric modulus-based analysis of the dielectric relaxation in carbon black loaded polymer composites, J. Appl. Phys., 107, 124111, 10.1063/1.3452366

Ravi, M., Pavani, Y., Kiran, K., Bhavani, S., Sharma, A., and Rao, V. (2011). Studies on electrical and dielectric properties of PVP:KBrO4 complexed polymer electrolyte film. Mater. Chem. Phys.

Scarpa, P.C.N., and Das-Gupta, D.K. (1998, January 7–10). Dielectric spectroscopy of polyethylene with and without carbon black. Proceedings of the Conference Record of the 1998 IEEE International Symposium on Electrical Insulation, Arlington, VA, USA.

Ramos, R.J., Bianchi, R.F., and Faria, R.M. (1999, January 22–24). AC electrical conductivity in polyethylene/carbon black composites. Proceedings of the 10th International Symposium on Electrets, Athens, Greece.

Hilker, 2010, Dielectric analysis of poly(methyl methacrylate) zinc(II) mono-pinacolborane diphenylporphyrin composites, Polymer, 51, 4790, 10.1016/j.polymer.2010.08.049

Ravikumar, 2019, Dielectric Properties of Natural Rubber Composites filled with Graphite, Mater. Today Proc., 16, 1338, 10.1016/j.matpr.2019.05.233

2008, Determination of dielectric properties of insulator materials by means of ANFIS: A comparative study, J. Mater. Process. Technol., 195, 34, 10.1016/j.jmatprotec.2007.04.106

JadahFarhan, 2014, Preparation and Study of Some Physical Properties for Polyester Reinforcement by (Al) Powder Composites, Int. J. Appl. Innov. Eng. Manag., 3, 2319

Dou, 2018, Rotomolding of foamed and unfoamed GTR-LLDPE blends: Mechanical, morphological and physical properties, Cell. Polym., 37, 55, 10.1177/026248931803700201

Yuan, 2010, Mechanical and Conductive Properties of Carbon Black-filled High-density Polyethylene, Low-density Polyethylene, and Linear Low-density Polyethylene, J. Compos. Mater., 23, 459, 10.1177/0892705709349318

2019, Influence on the mechanical properties of various polymeric composites reinforced with GTR particles, Afinidad, 76, 588

Deng, 2014, Progress on the morphological control of conductive network in conductive polymer composites and the use as electroactive multifunctional materials, Prog. Polym. Sci., 39, 627, 10.1016/j.progpolymsci.2013.07.007

Pan, 2016, Enhancing the electrical conductivity of carbon black-filled immiscible polymer blends by tuning the morphology, Eur. Pol. J., 78, 106, 10.1016/j.eurpolymj.2016.03.019

Billings, 1967, Tracking in Polymeric Insulation, IEEE Trans. Electr. Insul., EI-2, 131, 10.1109/TEI.1967.298855

Li, 2016, Progress in and prospects for electrical insulating materials, High Volt., 1, 122, 10.1049/hve.2016.0034

Teyssedre, G., and Laurent, C. (2005). Charge Transport Modeling in Insulating Polymers: From Molecular to Macroscopic Scale. IEEE Trans. Dielectr. Electr. Insul., 12.

Crone, 1997, Device model for single carrier organic diodes, J. Appl. Phys., 82, 6319, 10.1063/1.366522

Naskar, 2002, Effect of Chlorination of Ground Rubber Tire on its Compatibility with Poly(vinyl chloride): Dielectric Studies, J. Appl. Polym. Sci., 84, 993, 10.1002/app.2361

Saad, 2004, Studies of Electrical and Mechanical Properties of Poly(vinyl chloride) Mixed with Electrically Conductive Additives, J. Appl. Polym. Sci., 91, 1590, 10.1002/app.13239

Bowman, 2000, Dielectric enhancement and Maxwell–Wagner effects in ferroelectric superlattice structures, Appl. Phys. Lett., 77, 1520, 10.1063/1.1290691

Banys, 2011, Antimony doping effect on barium titanate structure and electrical properties, Ceram. Int., 37, 2669, 10.1016/j.ceramint.2011.04.015

McCrum, N.G., Read, B.E., and Williams, G. (1991). Anelastic and Dielectric Effects in Polymeric Solids, Dover Publications, INC.

Kalogeras, I.M., Pallikari-Viras, F., and Vassilikou-Dova, A. (1996, January 27). Dielectric and thermal characterization of electroactive sol gel/polymer composites. Proceedings of the 9th International Symposium on Electrets (ISE 9) Proceedings, Shanghai, China.

Wu, 2017, Interface charges between insulating materials, IEEE Trans. Dielectr. Electr. Insul., 24, 2633, 10.1109/TDEI.2017.006442

Tsangaris, 1996, Interfacial Relaxation Phenomena in Particulate Composites of Epoxy Resin with Copper or Iron Particles, Mater. Chem. Phys., 44, 245, 10.1016/0254-0584(96)80063-0

Ohki, Y. (2015, January 19–22). Dielectric relaxation phenomena of several insulating polymers analyzed by electric modulus spectra. Proceedings of the 2015 IEEE 11th International Conference on the Properties and Applications of Dielectric Materials (ICPADM), Sydney, Australia.

Sharma, 2019, Dielectric relaxations and transport properties parameter analysis of novel blended solid polymer electrolyte for sodium-ion rechargeable batteries, J. Mater. Sci., 54, 7131, 10.1007/s10853-019-03381-3

Tian, 2014, Electric modulus powerful tool for analyzing dielectric behavior, IEEE Trans. Dielectr. Electr. Insul., 21, 929, 10.1109/TDEI.2014.6832233

Prodromakis, 2009, Engineering the Maxwell–Wagner polarization effect, Appl. Surf. Sci., 255, 6989, 10.1016/j.apsusc.2009.03.030

Grigalaitis, 2017, Interdependence between structure and electrical characteristics in Sm-doped barium titanate, J. Alloy. Compd., 724, 959, 10.1016/j.jallcom.2017.07.099

Tsangaris, 1998, Electric modulus and interfacial polarization in composite polymeric systems, J. Mater. Sci., 33, 2027, 10.1023/A:1004398514901

Patra, 2020, Effect of LaNiO3 on the impedance and dielectric properties of CoFe2O4: A high temperature study, J. Phys. D Appl. Phys., 53, 045301, 10.1088/1361-6463/ab4842

Aziz, 2018, A conceptual review on polymer electrolytes and ion transport models, J. Sci. Adv. Mater. Devices, 3, 1, 10.1016/j.jsamd.2018.01.002

Coelho, 1983, On the relaxation of a space-charge, Rev. Phys. Appl., 18, 137, 10.1051/rphysap:01983001803013700

Kondo, 2003, Cole-Cole impedance analysis on spin sprayed Ni-Zn-Co ferrite films exhibiting strong magnetic loss in gigahertz range, IEEE Trans. Magn., 39, 3130, 10.1109/TMAG.2003.816028

Ahmed, H.T., and Abdullah, O.G. (2020). Impedance and ionic transport properties of proton-conducting electrolytesbased on polyethylene oxide/methylcellulose blend polymers. J. Sci. Adv. Mater. Devices.

Chawla, M., Gupta, D., Shekhawat, N., and Aggarwal, S. (2019). Argand plot and conduction mechanism study of N+ implanted CR-39 polymer. AIP Conf. Proc., 2093.

Tiwari, 2015, Dynamic mechanical and dielectric relaxation studies of chlorobutyl elastomer nanocomposites: Effect of nanographite loading and temperature, High Perform. Polym., 27, 274, 10.1177/0954008314545137

Marín-Genescà, M., García-Amorós, J., Mujal-Rosas, R., Salueña Berna, X., and Massagués Vidal, L. (2019). Comparison of Mechanical and Electrical Characteristics of Various Polymers Blended with Ground Tire Rubber (GTR) and Applications. Appl. Sci., 9.

Mujal, 2013, Electrical application of polystyrene (PS) reinforced with old tire rubber (GTR): Dielectric, thermal, and mechanical properties, Sci. Eng. Compos. Mater., 20, 233, 10.1515/secm-2012-0131

2015, Dielectric properties of vaius polymers (PVC, EVA, HDPE, and PP) reinforced with ground tire rubber (GTR), Sci. Eng. Compos. Mater., 22, 231, 10.1515/secm-2013-0233

Mujal, 2011, Study on dielectric, thermal, and mechanical properties of the ethylene vinyl acetate reinforced with ground tire rubber, J. Reinf. Plast. Compos., 30, 581, 10.1177/0731684411399135