Studies on the effect of polylactide in-situ grafting during melt processing on poly(ʟ-lactide)/graphene oxide composite films

Geim, 2009, Graphene: status and prospects, Science., 324, 1530, 10.1126/science.1158877 Tang, 2013, The effect of graphene dispersion on the mechanical properties of graphene/epoxy composites, Carbon., 60, 16, 10.1016/j.carbon.2013.03.050 Cui, 2016, Gas barrier performance of graphene/polymer nanocomposites, Carbon., 98, 313, 10.1016/j.carbon.2015.11.018 Pérez, 2015, π–π interactions in carbon nanostructures, Chem. Soc. Rev., 44, 6425, 10.1039/C5CS00578G Cao, 2011, Compatibilization of immiscible polymer blends using graphene oxide sheets, ACS Nano, 5, 5920, 10.1021/nn201717a Eigler, 2014, Chemistry with graphene and graphene oxide-challenges for synthetic chemists, Angew. Chem. Int. Ed., 53, 7720, 10.1002/anie.201402780 Tong, 2015, Achieving significantly enhanced dielectric performance of reduced graphene oxide/polymer composite by covalent modification of graphene oxide surface, Carbon., 94, 590, 10.1016/j.carbon.2015.07.005 Kumar, 2020, High-flux, antifouling hydrophilized ultrafiltration membranes with tunable charge density combining sulfonated poly(ether sulfone) and aminated graphene oxide nanohybrid, ACS Appl. Mater. Interfaces, 12, 1617, 10.1021/acsami.9b19387 Ganguly, 2019, An insight into the physico-mechanical signatures of silylated graphene oxide in poly(ethylene methyl acrylate) copolymeric thermoplastic matrix, Macromol. Res., 27, 268, 10.1007/s13233-019-7039-y Nguyen, 2020, Enhanced mechanical stability and biodegradability of Ti-infiltrated polylactide, ACS Appl. Mater. Interfaces, 12, 43501, 10.1021/acsami.0c13246 Ge, 2015, Effect of the content and distribution of ultraviolet absorbing groups on the UV protection and degradation of polylactide films, RSC Adv., 5, 70473, 10.1039/C5RA13285A Wu, 2013, Crystallization behavior of polylactide/graphene composites, Ind. Eng. Chem. Res., 52, 6731, 10.1021/ie4004199 Terzopoulou, 2019, Interfacial interactions, crystallization and molecular mobility in nanocomposites of poly(lactic acid) filled with new hybrid inclusions based on graphene oxide and silica nanoparticles, Polymer., 166, 1, 10.1016/j.polymer.2019.01.041 Scaffaro, 2017, PLA graphene nanoplatelets nanocomposites: physical properties and release kinetics of an antimicrobial agent, Compos. Part B, 109, 138, 10.1016/j.compositesb.2016.10.058 Wang, 2022, Self-reinforced composites based on polypropylene fiber and graphene nano-platelets/polypropylene film, Carbon., 189, 586, 10.1016/j.carbon.2021.12.098 Chen, 2018, Graphene oxide-templated synthesis of hydroxyapatite nanowhiskers to improve the mechanical and osteoblastic performance of poly(lactic acid) for bone tissue regeneration, ACS Sustain. Chem. Eng., 6, 3862, 10.1021/acssuschemeng.7b04192 Feng, 2016, Studies on synthesis of electrochemically exfoliated functionalized graphene and polylactic acid/ferric phytate functionalized graphene nanocomposites as new fire hazard suppression materials, ACS Appl. Mater. Interfaces, 8, 25552, 10.1021/acsami.6b08373 Xu, 2016, Zero-dimensional and highly oxygenated graphene oxide for multifunctional poly(lactic acid) bionanocomposites, ACS Sustain. Chem. Eng., 4, 5618, 10.1021/acssuschemeng.6b01524 Xu, 2021, Constructing robust chain entanglement network, well-defined nanosized crystals and highly aligned graphene oxide nanosheets: towards strong, ductile and high barrier poly(lactic acid) nanocomposite films for green packaging, Compos. Part B, 222, 10.1016/j.compositesb.2021.109048 Fu, 2014, Manipulating dispersion and distribution of graphene in PLA through novel interface engineering for improved conductive properties, ACS Appl. Mater. Interfaces, 6, 14069, 10.1021/am503283f Bao, 2012, Preparation of graphene by pressurized oxidation and multiplex reduction and its polymer nanocomposites by masterbatch-based melt blending, J. Mater. Chem., 22, 6088, 10.1039/c2jm16203b Huang, 2014, Improved barrier properties of poly(lactic acid) with randomly dispersed graphene oxide nanosheets, J. Membr. Sci., 464, 110, 10.1016/j.memsci.2014.04.009 Li, 2020, Enhancement of gas barrier properties of graphene oxide/poly (lactic acid) films using a solvent-free method, Materials., 13, 3024, 10.3390/ma13133024 Hu, 2020, A two-step combination strategy for significantly enhancing the interfacial adhesion of CF/PPS composites: the liquid-phase oxidation followed by grafting of silane coupling agent, Compos. Part B, 191, 10.1016/j.compositesb.2020.107966 Zhang, 2022, Bioinspired polydopamine deposition and silane grafting modification of bamboo fiber for improved interface compatibility of poly (lactic acid) composites, Int. J. Biol. Macromol., 201, 121, 10.1016/j.ijbiomac.2021.12.119 Chen, 2021, Stable co-continuous PLA/PBAT blends compatibilized by interfacial stereocomplex crystallites: toward full biodegradable polymer blends with simultaneously enhanced mechanical properties and crystallization rates, Macromolecules., 54, 2852, 10.1021/acs.macromol.0c02861 Gu, 2022, Extraordinary toughness and heat resistance enhancement of biodegradable PLA/PBS blends through the formation of a small amount of interface-localized stereocomplex crystallites during melt blending, Polymer., 262, 10.1016/j.polymer.2022.125454 Fischer, 1973, Investigation of the structure of solution grown crystals of lactide copolymers by means of chemical reactions, Polymere, 980, 10.1007/BF01498927 Tsuji, 1992, Stereocomplex formation between enantiomeric poly(lactic acid)s. 7. Phase structure of the stereocomplex crystallized from a dilute acetonitrile solution as studied by high-resolution solid-state carbon-13 NMR spectroscopy, Macromolecules., 25, 4114, 10.1021/ma00042a011 Ye, 2019, Improvement of anticorrosion ability of epoxy matrix in simulate marine environment by filled with superhydrophobic POSS-GO nanosheets, J. Hazard. Mater., 364, 244, 10.1016/j.jhazmat.2018.10.040 Zhao, 2018, Enhanced mechanical properties of self-polymerized polydopamine-coated recycled PLA filament used in 3D printing, Appl. Surf. Sci., 441, 381, 10.1016/j.apsusc.2018.01.257 Ni, 2018, Enhancing physical performance and hydrophobicity of paper-based cellulosic material via impregnation with starch and PEI-KH560, Cellulose., 25, 1365, 10.1007/s10570-017-1630-1 Namvari, 2017, Reduced graphene oxide composites with water soluble copolymers having tailored lower critical solution temperatures and unique tube-like structure, Sci. Rep., 7, 44508, 10.1038/srep44508 Mróz, 2013, Thermogravimetric and DSC testing of poly(lactic acid) nanocomposites, Thermochim. Acta, 573, 186, 10.1016/j.tca.2013.09.012 Krishnamoorthy, 2013, The chemical and structural analysis of graphene oxide with different degrees of oxidation, Carbon., 53, 38, 10.1016/j.carbon.2012.10.013 Khaki, 2019, Effect of crystallinity, crystal polymorphism, and graphene oxide nanosheets on the barrier properties of poly (l-lactic acid), Eur. Polym. J., 118, 53, 10.1016/j.eurpolymj.2019.05.047 Akhina, 2020, Influence of reduced graphene oxide on flow behaviour, glass transition temperature and secondary crystallinity of plasticized poly(vinyl chloride), RSC Adv., 10, 29247, 10.1039/D0RA04560H Mohamad, 2021, Evaluation on structural properties and performances of graphene oxide incorporated into chitosan/poly-lactic acid composites: CS/PLA versus CS/PLA-GO, Polymers., 13, 1839, 10.3390/polym13111839 Sun, 2011, Crystallization behavior of asymmetric PLLA/PDLA blends, J. Phys. Chem. B, 115, 2864, 10.1021/jp111894m