Structural changes of multiphase low-carbon steel in deformation and heat treatment
Tóm tắt
The influence of the rolling parameters on the structural and phase transformations and mechanical properties of steel is analyzed. At a particular combination of temperature, strain, and strain rate, fine-grain austenite structure may be obtained, with highly developed polygonal substructure. For low-carbon steel, the best combination of cooling and winding parameters after rolling is as follows: t
fr = 800–850°C; t
in.co = 750°C; v
co = 80°C/s; t
wi = 500°C.
Tài liệu tham khảo
Minaev, A.A., Sovmeshennye metallurgicheskie protsessy (Integrated Metallurgical Processes), Donetsk: Tekhnopark DonGTU-UNITEKh. 2008.
Pogorzhel’skii, V.I., Kontroliruemaya prokatka nepreryvnolitogo metalla (Controlled Rolling of Continuous-Cast Metal), Moscow: Metallurgiya. 1979.
Bernshtein, M.L., Struktura deformirovannykh metallov (Structure of Deformed Metals), Moscow: Metallurgiya. 1977.
Pogorzhel’skii, V.I., Litvinenko, D.A., Matrosov, Yu.I., et al., Kontroliruemaya prokatka (Controlled Rolling), Moscow: Metallurgiya. 1979.
Matrosov, Yu.I., Controlled rolling: Multistage thermal and mechanical treatment of low-alloy steel, Stal’. 1987, no. 7, pp. 75–80.
Bol’shakov, V.I., Dolzhenkov, I.E., and Dolzhenkov, V.I., Termicheskaya obrabotka stali i metalloprokata: ucheb. dlya vuzov (Heat Treatment of Steel and Rolled Products: A University Textbook), Dnepropetrovsk: Gaudeamus. 2002.
Spivakov, V.I., Orlov, E.A., Ganoshenko, I.V., and Volodarskii, V.V., Influence of chemical composition and controlled-rolling temperature on the properties of pipe-steel sheet, Fundamental’nye i prikladnye problemy chernoi metallurgii (Fundamental and Applied Problems of Nonferrous Metallurgy). 2005, no. 10, pp. 180–186.
Bel’chenko, G.I. and Gubenko, S.I., Osnovy metallografii i plasticheskoi deformatsii stali (Fundamentals of the Metallography and Plastic Deformation of Steel), Kiev: Donetsk: Vysshaya Shkola. 1987.
Bernshtein, M.L., Termomekhanicheskaya obrabotka metallov i splavov (Thermomechanical Treatment of Metals and Alloys), Moscow: Metallurgiya. 1968.
Ivanchenko, V.G., Tilik, V.T., Shtekhno, O.N., et al., Trends in the production of superthin hot-rolled strip, Fundamental’nye i prikladnye problemy chernoi metallurgii (Fundamental and Applied Problems of Nonferrous Metallurgy). 2004, no. 8, pp. 233–239.
Molchanov, A.I., Soltan, S.L., Yalanskii, V.P., et al., Production of superthin hot-rolled strip at Zaporozhstal’, Metallurg. Gornorud. Prom.. 2002, no. 8/9, pp. 11–14.
Satskii, V.A., Putnoki, A.Yu., Shtekhno, O.N., et al., Production of superthin hot-rolled steel strip, Teor. Prakt. Metall.. 2003, no. 3(35), pp. 50–55.