Strontium-doped hardystonite plasma sprayed coatings with robust antimicrobial activity

Mas-Moruno, 2019, Multifunctional coatings and nanotopographies: toward cell instructive and antibacterial implants, Adv. Healthcare Mater., 8, 1801103, 10.1002/adhm.201801103 Liu, 2004, Surface modification of titanium, titanium alloys, and related materials for biomedical applications, Mater. Sci. Eng. R Rep., 47, 49, 10.1016/j.mser.2004.11.001 Berndt, 2014, A review of hydroxyapatite coatings manufactured by thermal spray, 267 Sun, 2001, Material fundamentals and clinical performance of plasma-sprayed hydroxyapatite coatings: a review, J. Biomed. Mater. Res., 58, 570, 10.1002/jbm.1056 Sun, 2018, Thermal spray coatings on orthopedic devices: when and how the FDA reviews your coatings, J. Therm. Spray Technol., 27, 1280, 10.1007/s11666-018-0759-2 Yu, 2015, Biomaterials for bone regenerative engineering, Adv. Healthcare Mater., 4, 1268, 10.1002/adhm.201400760 Gu, 2003, In vitro studies of plasma-sprayed hydroxyapatite/Ti-6Al-4V composite coatings in simulated body fluid (SBF), Biomaterials, 24, 1603, 10.1016/S0142-9612(02)00573-2 Gross, 1998, Amorphous phase formation in plasma-sprayed hydroxyapatite coatings, J. Biomed. Mater. Res., 39, 407, 10.1002/(SICI)1097-4636(19980305)39:3<407::AID-JBM9>3.0.CO;2-N Vallet-Regí, 2020, Biomaterials against bone infection, Adv. Healthcare Mater., 9, 2000310, 10.1002/adhm.202000310 Zimmerli, 2014, Clinical presentation and treatment of orthopaedic implant-associated infection, J. Intern. Med., 276, 111, 10.1111/joim.12233 Cheeseman, 2020, Antimicrobial metal nanomaterials: from passive to stimuli-activated applications, Adv. Sci., 7, 1902913, 10.1002/advs.201902913 Ribau, 2021, Is preoperative Staphylococcus aureus screening and decolonization effective at reducing surgical site infection in patients undergoing orthopedic surgery? A systematic review and meta-analysis with a special focus on elective total joint arthroplasty, J. Arthroplasty, 36, 752, 10.1016/j.arth.2020.08.014 Baratz, 2015, Twenty percent of patients may remain colonized with methicillin-resistant Staphylococcus aureus despite a decolonization protocol in patients undergoing elective total joint arthroplasty, Clin. Orthop. Relat. Res., 473, 2283, 10.1007/s11999-015-4191-3 Del Pozo, 2009, Infection associated with prosthetic joints, N. Engl. J. Med., 361, 787, 10.1056/NEJMcp0905029 Singh, 2020, Deposition of HA-TiO2 by plasma spray on β-phase Ti-35Nb-7Ta-5Zr alloy for hip stem: characterization, mechanical properties, corrosion, and in-vitro bioactivity, Surf. Coating. Technol., 398, 126072, 10.1016/j.surfcoat.2020.126072 Ren, 2020, Heat and hydrothermal treatments on the microstructure evolution and mechanical properties of plasma sprayed hydroxyapatite coatings reinforced with graphene nanoplatelets, J. Mech. Behav. Biomed. Mater., 101, 103418, 10.1016/j.jmbbm.2019.103418 Mittal, 2013, Improvement in mechanical properties of plasma sprayed hydroxyapatite coatings by Al2O3 reinforcement, Mater. Sci. Eng. C, 33, 2838, 10.1016/j.msec.2013.03.005 Fu, 2001, Processing, microstructure and mechanical properties of yttria stabilized zirconia reinforced hydroxyapatite coatings, Mater. Sci. Eng., A, 316, 46, 10.1016/S0921-5093(01)01253-9 Ullah, 2020, Mechanical, biological, and antibacterial characteristics of plasma-sprayed (Sr,Zn) substituted hydroxyapatite coating, ACS Biomater. Sci. Eng., 6, 1355, 10.1021/acsbiomaterials.9b01396 Vu, 2019, Mechanical and biological properties of ZnO, SiO2, and Ag2O doped plasma sprayed hydroxyapatite coating for orthopaedic and dental applications, Acta Biomater., 92, 325, 10.1016/j.actbio.2019.05.020 Xu, 2020, Hydrothermal sterilization in silver nitrate solution endows plasma sprayed hydroxyapatite coating with antibacterial property, Mater. Lett., 263, 127258, 10.1016/j.matlet.2019.127258 Liu, 2021, In vitro bioactivity and antibacterial performances of atmospheric plasma sprayed c-axis preferential oriented hydroxyapatite coatings, Surf. Coating. Technol., 417, 127209, 10.1016/j.surfcoat.2021.127209 Wu, 2007, The effect of strontium incorporation into CaSiO3 ceramics on their physical and biological properties, Biomaterials, 28, 3171, 10.1016/j.biomaterials.2007.04.002 Zreiqat, 2010, The incorporation of strontium and zinc into a calcium–silicon ceramic for bone tissue engineering, Biomaterials, 31, 3175, 10.1016/j.biomaterials.2010.01.024 Pham, 2019, Mechanical and chemical properties of Baghdadite coatings manufactured by atmospheric plasma spraying, Surf. Coating. Technol., 124945, 10.1016/j.surfcoat.2019.124945 Pham, 2019, Mechanical properties of strontium–hardystonite–gahnite coating formed by atmospheric plasma spray, Coatings, 9, 10.3390/coatings9110759 Zhang, 2012, Preparation and characterization of Sr–hardystonite (Sr2ZnSi2O7) for bone repair applications, Mater. Sci. Eng. C, 32, 184, 10.1016/j.msec.2011.10.017 Wu, 2005, A novel hardystonite bioceramic: preparation and characteristics, Ceram. Int., 31, 27, 10.1016/j.ceramint.2004.02.008 Yang, 2017, Flame sprayed zinc doped hydroxyapatite coating with antibacterial and biocompatible properties, Ceram. Int., 43, S829, 10.1016/j.ceramint.2017.05.318 Zhang, 2013, The synergistic effect of hierarchical micro/nano-topography and bioactive ions for enhanced osseointegration, Biomaterials, 34, 3184, 10.1016/j.biomaterials.2013.01.008 Vattulainen, 2001, Novel method for in-flight particle temperature and velocity measurements in plasma spraying using a single CCD camera, J. Therm. Spray Technol., 10, 94, 10.1361/105996301770349556 Oliver, 1992, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J. Mater. Res., 7, 1564, 10.1557/JMR.1992.1564 Chan, 2021, Tailoring mechanical and electrical properties of graphene oxide film for structural dielectric capacitors, J. Power Sources, 482, 229020, 10.1016/j.jpowsour.2020.229020 Sudharshan Phani, 2019, A critical assessment of the effect of indentation spacing on the measurement of hardness and modulus using instrumented indentation testing, Mater. Des., 164, 107563, 10.1016/j.matdes.2018.107563 2017 2017 Food and Drug Administration, 2000 Otsu, 1979, A threshold selection method from gray-level histograms, IEEE Transact. Syst. Man Cybernet., 9, 62, 10.1109/TSMC.1979.4310076 Pham, 2021, Baghdadite coating formed by hybrid water-stabilized plasma spray for bioceramic applications: mechanical and biological evaluations, Mater. Sci. Eng. C, 111873, 10.1016/j.msec.2021.111873 Besharatloo, 2021, Influence of indentation size and spacing on statistical phase analysis via high-speed nanoindentation mapping of metal alloys, J. Mater. Res., 36, 2198, 10.1557/s43578-021-00214-5 Yang, 2001, Influence of residual stress on bonding strength and fracture of plasma-sprayed hydroxyapatite coatings on Ti–6Al–4V substrate, Biomaterials, 22, 1827, 10.1016/S0142-9612(00)00364-1 Zheng, 2000, Bond strength of plasma-sprayed hydroxyapatite/Ti composite coatings, Biomaterials, 21, 841, 10.1016/S0142-9612(99)00255-0 Whitehead, 1993, The effect of dissolution on plasma sprayed hydroxylapatite coatings on titanium, Clin. Mater., 12, 31, 10.1016/0267-6605(93)90025-3 Wang, 1993, The shear strength and the failure mode of plasma-sprayed hydroxyapatite coating to bone: the effect of coating thickness, J. Biomed. Mater. Res., 27, 1315, 10.1002/jbm.820271012 Zhang, 2009, Preparation and characterization of silicon-substituted hydroxyapatite coating by a biomimetic process on titanium substrate, Surf. Coating. Technol., 203, 1075, 10.1016/j.surfcoat.2008.09.038 Kweh, 1999, Production and characterization of hydroxyapatite (HA) powders, J. Mater. Process. Technol., 89–90, 373, 10.1016/S0924-0136(99)00061-8 Kucuk, 2001, Influence of plasma spray parameters on in-flight characteristics of ZrO2–8 wt% Y2O3 ceramic particles, J. Am. Ceram. Soc., 84, 685, 10.1111/j.1151-2916.2001.tb00727.x Tucker, 2013 Fauchais, 2004, Understanding plasma spraying, J. Phys. Appl. Phys., 37, R86, 10.1088/0022-3727/37/9/R02 Najafinezhad, 2017, A comparative study on the synthesis mechanism, bioactivity and mechanical properties of three silicate bioceramics, Mater. Sci. Eng. C, 72, 259, 10.1016/j.msec.2016.11.084 Konyashin, 2015, Wear-resistance and hardness: are they directly related for nanostructured hard materials?, Int. J. Refract. Metals Hard Mater., 49, 203, 10.1016/j.ijrmhm.2014.06.017 Bull, 1999, Can scratch testing be used as a model for the abrasive wear of hard coatings?, Wear, 233–235, 412, 10.1016/S0043-1648(99)00207-0 Leyland, 2000, On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour, Wear, 246, 1, 10.1016/S0043-1648(00)00488-9 Fielding, 2012, Antibacterial and biological characteristics of silver containing and strontium doped plasma sprayed hydroxyapatite coatings, Acta Biomater., 8, 3144, 10.1016/j.actbio.2012.04.004 Tigani, 2015, 14 - revision total knee arthroplasty (TKA), 229 Ang, 2014, A review of testing methods for thermal spray coatings, Int. Mater. Rev., 59, 179, 10.1179/1743280414Y.0000000029 Haussühl, 2004, Elastic and thermoelastic properties of synthetic Ca2MgSi2O7 (åkermanite) and Ca2ZnSi2O7 (hardystonite), Phys. Chem. Miner., 31, 565, 10.1007/s00269-004-0416-9 Li, 2004, Thermal sprayed hydroxyapatite splats: nanostructures, pore formation mechanisms and TEM characterization, Biomaterials, 25, 3463, 10.1016/j.biomaterials.2003.10.051 Crawford, 2012, Surface topographical factors influencing bacterial attachment, Adv. Colloid Interface Sci., 179–182, 142, 10.1016/j.cis.2012.06.015 Truong, 2010, The influence of nano-scale surface roughness on bacterial adhesion to ultrafine-grained titanium, Biomaterials, 31, 3674, 10.1016/j.biomaterials.2010.01.071 Allion, 2006, Impact of surface energy and roughness on cell distribution and viability, Biofouling, 22, 269, 10.1080/08927010600902789 Medilanski, 2002, Influence of the surface topography of stainless steel on bacterial adhesion, Biofouling, 18, 193, 10.1080/08927010290011370 Fadeeva, 2011, Bacterial retention on superhydrophobic titanium surfaces fabricated by femtosecond laser ablation, Langmuir, 27, 3012, 10.1021/la104607g Truong, 2012, Air-directed attachment of coccoid bacteria to the surface of superhydrophobic lotus-like titanium, Biofouling, 28, 539, 10.1080/08927014.2012.694426 Mohd Yusof, 2019, Microbial synthesis of zinc oxide nanoparticles and their potential application as an antimicrobial agent and a feed supplement in animal industry: a review, J. Anim. Sci. Biotechnol., 10, 57, 10.1186/s40104-019-0368-z Sanpo, 2010, Biocompatibility and antibacterial property of cold sprayed ZnO/titanium composite coating, 140 Anwar, 2016, Novel continuous flow synthesis, characterization and antibacterial studies of nanoscale zinc substituted hydroxyapatite bioceramics, Inorg. Chim. Acta., 453, 16, 10.1016/j.ica.2016.07.041 N. N., 2017, In vivo and clinical application of strontium-enriched biomaterials for bone regeneration, Bone Joint Res., 6, 366, 10.1302/2046-3758.66.BJR-2016-0311.R1 Pilmane, 2017, Strontium and strontium ranelate: historical review of some of their functions, Mater. Sci. Eng. C, 78, 1222, 10.1016/j.msec.2017.05.042 Lemire, 2013, Antimicrobial activity of metals: mechanisms, molecular targets and applications, Nat. Rev. Microbiol., 11, 371, 10.1038/nrmicro3028