String flash-boiling in gasoline direct injection simulations with transient needle motion

Aleiferis, 2013, An analysis of spray development with isooctane, n-pentane, gasoline, ethanol and n-butanol from a multi-hole injector under hot fuel conditions, Fuel, 105, 143, 10.1016/j.fuel.2012.07.044 Aori, 2016, Effect of nozzle configuration on macroscopic spray characteristics of multi-hole fuel injectors under superheated conditions, Atom. Sprays, 26, 439, 10.1615/AtomizSpr.2015011990 Battistoni, 2014, Effect of off-axis needle motion on internal nozzle and near exit flow in a multi-hole diesel injector, SAE Int. J. Fuels Lubr., 7, 167, 10.4271/2014-01-1426 Befrui, 2012, Large eddy simulation of GDI single-hole flow and near-field spray, SAE Int. J. Fuels Lubr., 5, 620, 10.4271/2012-01-0392 Berndorfer, 2013, Diffusion Combustion Phenomena in GDi Engines caused by Injection Process Bilicki, 1990, Physical aspects of the relaxation model in two-phase flow, 428, 379 Blessinger, 2015, Quantitative mixing measurements and stochastic variability of a vaporizing gasoline direct-injection spray, Int. J. Engine Res., 16, 238, 10.1177/1468087414531971 Colarossi, 2012, Multidimensional modeling of condensing two-phase ejector flow, Int. J. Refrigeration, 35, 290, 10.1016/j.ijrefrig.2011.08.013 Dahms, 2013, Understanding high-pressure gas-liquid interface phenomena in diesel engines, Proc. Combust. Inst., 34, 1667, 10.1016/j.proci.2012.06.169 Dahms, 2013, On the transition between two-phase and single-phase interface dynamics in multicomponent fluids at supercritical pressures, Phys. Fluids, 25, 10.1063/1.4820346 Desantes, 2016, Coupled/decoupled spray simulation comparison of the ECN spray a condition with the Σ-Y eulerian atomization model, Int. J. Multiphase Flow, 80, 89, 10.1016/j.ijmultiphaseflow.2015.12.002 Desantes, 2014, Simulation of the First Millimeters of the Diesel Spray by an Eulerian Spray Atomization Model Applied on ECN Spray A Injector Downar-Zapolski, 1996, The non-equilibrium relaxation model for one-dimensional flashing liquid flow, Int. J. Multiphase Flow, 22, 473, 10.1016/0301-9322(95)00078-X Duke, 2014, X-Ray imaging of cavitation in diesel injectors, SAE Int. J. Engines, 7, 1003, 10.4271/2014-01-1404 Duke, 2014, X-ray imaging of cavitation in diesel injectors Engine Combustion Network http://www.sandia.gov/ecn/index.php. Garcia-Oliver, 2013, Diesel spray cfd simulations based on the Σ-Υ eulerian atomization model, Atom. Sprays, 23, 71, 10.1615/AtomizSpr.2013007198 Gopalakrishnan, 2009, A computational study of flashing flow in fuel injector nozzles, SAE Int. J. Engines, 1, 160, 10.4271/2008-01-0141 Kastengren, 2011, Correlation of split-Injection needle lift and spray structure, SAE J., 2011 Kastengren, 2012, Engine combustion network (ECN): measurements of nozzle geometry and hydraulic behavior, Atomiz. Sprays, 22, 1011, 10.1615/AtomizSpr.2013006309 Lemmon, E., Huber, M., McLinden, M., 2013. NIST Standard Reference Database 23: Reference Fluid Thermodynamic and Transport Properties-REFPROP, Version 9.1, National Institute of Standards and Technology, Standard Reference Data Program, Gaithersburg. Manin, 2012, Understanding the acoustic oscillations observed in the injection rate of a common-Rail direct injection diesel injector, J. Eng. Gas Turb. Power, 134, 122801, 10.1115/1.4007276 Moulai, 2015, Internal and Near-Nozzle Flow in a Multi-Hole Gasoline Injector Under Flashing and Non-Flashing Conditions Negro, 2011, Superheated fuel injection modeling: an engineering approach, Int. J. Thermal Sci., 50, 1460, 10.1016/j.ijthermalsci.2011.03.028 Neroorkar, 2011, A Computational Investigation of Flash-Boiling Multi-hole Injectors with Gasoline-Ethanol Blends Neroorkar, 2011, Modeling of vapor-liquid equilibrium of gasoline-ethanol blended fuels for flash boiling simulations, Fuel, 90, 665, 10.1016/j.fuel.2010.09.035 Neroorkar, 2012, Application of the Homogeneous Relaxation Model to Simulating Cavitating Flow of a Diesel Fuel Neroorkar, 2011 Ning, 2009, An eulerian-Lagrangian spray and atomization model with improved turbulence modeling, Atomiz. Sprays, 19, 727, 10.1615/AtomizSpr.v19.i8.20 Oza, 1983, An experimental and analytical study of flash-boiling fuel injection Parrish, 2010, Spray patternation of a multi-hole injector utilizing planar line-of-sight extinction tomography Postrioti, 2015, Momentum Flux Measurement on Single-Hole GDI Injector under Flash-Boiling Condition Powell, 2011, The effects of diesel injector needle motion on spray structure, J. Eng. Gas Turb. Power, 133, 012802, 10.1115/1.4001073 Saha, 2016, Numerical investigation of two-Phase flow evolution of in- and near-Nozzle regions of a gasoline direct injection engine during needle transients, SAE Int. J. Engines, 9, 10.4271/2016-01-0870 Saha, 2015, Modeling of internal and near-nozzle flow for a GDI fuel injector Salvador, 2014, Effect of turbulence model and inlet boundary condition on the diesel spray behavior simulated by an eulerian spray atomization (ESA) model, Int. J. Multiphase Flow, 65, 108, 10.1016/j.ijmultiphaseflow.2014.06.003 Schmidt, 1999, A two-dimensional, non-equilibrium model of flashing nozzle flow Schmidt, 2010, Multi-dimensional simulation of thermal non-equilibrium channel flow, Int. J. Multiphase Flow, 36, 284, 10.1016/j.ijmultiphaseflow.2009.11.012 Serras-Pereira, 2010, Cavitation, primary break-up and flash boiling of gasoline, isooctane and n-pentane with a real-size optical direct-injection nozzle, Fuel, 89, 2592, 10.1016/j.fuel.2010.03.030 Shen, 2007, Dedicated full-field X-ray imaging beamline at advanced photon source, Nucl. Instrum. Methods Phys. Res. Section A, 582, 77, 10.1016/j.nima.2007.08.169 Sher, 2008, Flash-boiling atomization, Progr. Energy Combust. Sci., 34, 417, 10.1016/j.pecs.2007.05.001 Shost, 2014, GDI Nozzle Parameter Studies Using LES and Spray Imaging Methods Strek, 2016, X-ray radiography and CFD studies of the spray G injector Vallet, 2001, Development of a eulerian model for the “atomization” of a liquid jet, Atomiz. Sprays, 11, 619, 10.1615/AtomizSpr.v11.i6.20 Van Romunde, 2009, Effect of operating conditions and fuel volatility on development and variability of sprays from gasoline direct-Injection multihole injectors, Atomiz. Sprays, 19, 207, 10.1615/AtomizSpr.v19.i3.10 Viera, 2016, Linking instantaneous rate of injection to X-ray needle lift measurements for a direct-acting piezoelectric injector, Energy Conver. Manage., 112, 350, 10.1016/j.enconman.2016.01.038 Weller, 1998, A tensorial approach to computational continuum mechanics using object-oriented techniques, Comput. Phys., 12, 620, 10.1063/1.168744 Xu, 2013, Flash boiling: easy and better way to generate ideal sprays than the high injection pressure, SAE Int. J. Fuels Lubr., 6, 137, 10.4271/2013-01-1614 Xue, 2015, An eulerian CFD model and X-ray radiography for coupled nozzle flow and spray in internal combustion engines, Int. J. Multiphase Flow, 70, 77, 10.1016/j.ijmultiphaseflow.2014.11.012 Xue, 2014, Eulerian CFD modeling of coupled nozzle flow and spray with validation against X-Ray radiography data, SAE Int. J. Engines, 7, 10.4271/2014-01-1425 Zeng, 2012, Atomization and vaporization for flash-boiling multi-hole sprays with alcohol fuels, Fuel, 95, 287, 10.1016/j.fuel.2011.08.048 Zeng, 2012, Macroscopic characteristics for direct-injection multi-hole sprays using dimensionless analysis, Exp. Therm. Fluid Sci., 40, 81, 10.1016/j.expthermflusci.2012.02.003 Zhang, 2013, Macroscopic characterization of flash-Boiling multihole sprays using planar laser-Induced exciplex fluorescence. part II: cross-Sectional spray structure, Atomiz. Sprays, 23, 265, 10.1615/AtomizSpr.2013007450 Zhang, 2013, Simultaneous high-speed imaging of fuel spray, combustion luminosity, and soot luminosity in a spray-guided direct injection engine with different multi-hole fuel injectors