Stress-strain curves for hot-rolled steels

Kuwabara, 2007, Advances in experiments on metal sheets and tubes in support of constitutive modelling and forming simulations, Int. J. Plast., 23, 385, 10.1016/j.ijplas.2006.06.003

Arablouei, 2016, Modelling delamination of fire insulation from steel structures subjected to blast loading, Eng. Struct., 116, 56, 10.1016/j.engstruct.2016.02.042

Chen, 2016, Behaviour of cylindrical steel drums under blast loading conditions, Int. J. Impact Eng., 88, 39, 10.1016/j.ijimpeng.2015.09.007

Yang, 2012, Numerical analyses of steel beam–column joints subjected to catenary action, J. Constr. Steel Res., 70, 1, 10.1016/j.jcsr.2011.10.007

Sabbagh, 2013, Cyclic behaviour of bolted cold-formed steel moment connections: FE modelling including slip, J. Constr. Steel Res., 80, 100, 10.1016/j.jcsr.2012.09.010

Gardner, 2011, Influence of strain hardening on the behaviour and design of steel structures, Int. J. Struct. Stab. Dyn., 11, 855, 10.1142/S0219455411004373

Liew, 2015, Ultimate capacity of structural steel cross-sections under compression, bending and combined loading, Structures, 1, 2, 10.1016/j.istruc.2014.07.001

Foster, 2015, Practical strain-hardening material properties for use in deformation-based structural steel design, Thin-Walled Struct., 92, 115, 10.1016/j.tws.2015.02.002

Huang, 2010

Sadowski, 2015, Statistical analysis of the material properties of selected structural carbon steels, Struct. Saf., 53, 26, 10.1016/j.strusafe.2014.12.002

Foster, 2014

Bruneau, 2011

EN 1993-1-1, 2005

EN 1993-1-5, 2006

Gardner, 2008, The continuous strength method, Proc. Inst. Civ. Eng. Struct. Build., 161, 127, 10.1680/stbu.2008.161.3.127

Su, 2014, Testing and design of aluminium alloy cross-sections in compression, J. Struct. Eng. ASCE, 140, 10.1061/(ASCE)ST.1943-541X.0000972

Su, 2016, The continuous strength method for the design of aluminium alloy structural elements, Eng. Struct., 122, 338, 10.1016/j.engstruct.2016.04.040

Gardner, 2004, Stainless steel structural design: a new approach, The Structural Engineer, 82, 21

Afshan, 2013, The continuous strength method for structural stainless steel design, Thin-Walled Struct., 68, 42, 10.1016/j.tws.2013.02.011

Ramberg, 1943

Hill, 1944

Rasmussen, 2003, Full-range stress–strain curves for stainless steel alloys, J. Constr. Steel Res., 59, 47, 10.1016/S0143-974X(02)00018-4

Quach, 2014, Two-stage stress-strain models for light-gauge steels, Adv. Struct. Eng., 17, 937, 10.1260/1369-4332.17.7.937

Mirambell, 2000, On the calculation of deflections in structural stainless steel beams: an experimental and numerical investigation, J. Constr. Steel Res., 54, 109, 10.1016/S0143-974X(99)00051-6

Mander, 1983

Recommendation, 1990, Tension testing of metallic structural materials for determining stress-strain relations under monotonic and uniaxial tensile loading, Mater. Struct., 23, 35, 10.1007/BF02472996

McDermott, 1969, Local plastic buckling of A514 steel members, J. Struct. Div., 95, 1837, 10.1061/JSDEAG.0002350

Kuhlmann, 1989, Definition of flange slenderness limits on the basis of rotation capacity values, J. Constr. Steel Res., 14, 21, 10.1016/0143-974X(89)90068-0

Wang, 2011

Roderick, 1951

Byfield, 2002, Analysis of strain hardening in steel beams using mill tests, 139

American Society of Civil Engineers (ASCE), 1972

Boeraeve, 1993, Elasto-plastic behaviour of steel frame works, J. Constr. Steel Res., 27, 3, 10.1016/0143-974X(93)90003-B

Vogel, 1985, Some comments on the ECCS publication no. 33: ultimate limit state calculation of sway frames with rigid joints, Construzioni Metalliche HI, 37, 35

Nseir, 2015

Galambos, 1998

Buchanan, 2016, The continuous strength method for the design of circular hollow sections, J. Constr. Steel Res., 118, 207, 10.1016/j.jcsr.2015.11.006

Bock, 2015, Material and local buckling response of ferritic stainless steel sections, Thin-Walled Struct., 89, 131, 10.1016/j.tws.2014.12.012

Wang, 2016, Flexural behaviour of hot-finished high strength steel square and rectangular hollow sections, J. Constr. Steel Res., 121, 97, 10.1016/j.jcsr.2016.01.017

Chan, 2008, Bending strength of hot-rolled elliptical hollow sections, J. Constr. Steel Res., 64, 971, 10.1016/j.jcsr.2007.11.001

Shi, 2012, Tests and numerical study of ultra-high strength steel columns with end restraints, J. Constr. Steel Res., 70, 236, 10.1016/j.jcsr.2011.10.027

Foster, 2013, Ultimate behaviour of steel beams with discrete lateral restraints, Thin-Walled Struct., 72, 88, 10.1016/j.tws.2013.06.009

D'Aniello, 2012, Ultimate behavior of steel beams under non-uniform bending, J. Constr. Steel Res., 78, 144, 10.1016/j.jcsr.2012.07.003

Liew, 2014

Wilkinson, 1999

Yun, 2016, Experimental and numerical investigation into the local imperfection sensitivity of hot-rolled steel I-sections

Shokouhian, 2015, Flexural strength of hybrid steel I-beams based on slenderness, Eng. Struct., 93, 114, 10.1016/j.engstruct.2015.03.029

Saloumi, 2015, Experimental characterization of the rotational capacity of hollow structural shapes, 591

Zhao, 2011

Zhou, 2014

Lu, 2016, Experimental investigation into the post-fire mechanical properties of hot-rolled and cold-formed steels, J. Constr. Steel Res., 121, 291, 10.1016/j.jcsr.2016.03.005

Chen, 2008, Experimental study on hysteretic behaviour of SRC columns with high ratio of core steel, J. Build. Struct., 29, 31

Qiao, 2007

Qi, 2014

Yu, 2010

Cao, 2014

Yang, 2013

Kettler, 2008

Lin, 2012

Ban, 2014, Investigation on design method of overall buckling behaviour for Q420 high strength steel equal-leg angle members under axial compression, Engineering Mechanics, 31, 63

Shi, 2011, Experimental study on the local buckling of high strength steel equal angles under axial compression, Engineering Mechanics, 28, 45

Bao, 2012

Ban, 2012, Overall buckling behaviour of 460MPa high strength steel columns: experimental investigation and design method, J. Constr. Steel Res., 74, 140, 10.1016/j.jcsr.2012.02.013

Coelho, 2009, Experimental behaviour of high-strength steel web shear panels, Eng. Struct., 31, 1543, 10.1016/j.engstruct.2009.02.023

Cuk, 1986, Inelastic buckling of continuous steel beam-columns, J. Constr. Steel Res., 6, 21, 10.1016/0143-974X(86)90019-2

Luo, 2013

GetData Graph Digitizer 2.26

EN 10027-1, 2005

GB50017-2003, 2003

Arrayago, 2015, Description of stress–strain curves for stainless steel alloys, Mater. Des., 87, 540, 10.1016/j.matdes.2015.08.001

Gardner, 2010, Comparative experimental study of hot-rolled and cold-formed rectangular hollow sections, Thin-Walled Struct., 48, 495, 10.1016/j.tws.2010.02.003

Yan, 2002, Column tests of cold-formed steel channels with complex stiffeners, J. Struct. Eng., 128, 737, 10.1061/(ASCE)0733-9445(2002)128:6(737)

Young, 1995

Rasmussen, 2006, Bifurcation of locally buckled point symmetric columns—experimental investigations, Thin-Walled Struct., 44, 1175, 10.1016/j.tws.2006.10.009

Kwon, 1992, Tests of cold-formed channels with local and distortional buckling, J. Struct. Eng., 118, 1786, 10.1061/(ASCE)0733-9445(1992)118:7(1786)

Rogers, 1996

Kesti, 2000

Kaitila, 2004

Gosaye, 2014, Tensile performance of prestressed steel elements, Eng. Struct., 79, 234, 10.1016/j.engstruct.2014.08.009

Kim, 2014, Material performance evaluation and super-tall building applicability of the 800MPa high-strength steel plates for building structures, International Journal of Steel Structures, 14, 889, 10.1007/s13296-014-1219-6

Rasmussen, 1995, Tests of high strength steel columns, J. Constr. Steel Res., 34, 27, 10.1016/0143-974X(95)97296-A

Rasmussen, 1992, Plate slenderness limits for high strength steel sections, J. Constr. Steel Res., 23, 73, 10.1016/0143-974X(92)90037-F

Jiao, 2001, Material ductility of very high strength (VHS) circular steel tubes in tension, Thin-Walled Struct., 39, 887, 10.1016/S0263-8231(01)00039-8

Tran, 2015, Resistance of cold-formed high strength steel circular and polygonal sections—part 1: experimental investigations, J. Constr. Steel Res., 120, 245, 10.1016/j.jcsr.2015.10.014

Ban, 2013, Experimental investigation of the overall buckling behaviour of 960MPa high strength steel columns, J. Constr. Steel Res., 88, 256, 10.1016/j.jcsr.2013.05.015

Kyvelou, 2015, Composite action between cold-formed steel beams and wood-based floorboards, Int. J. Struct. Stab. Dyn., 15, 1540029, 10.1142/S0219455415400295

Afshan, 2013, Strength enhancements in cold-formed structural sections - part I: material testing, J. Constr. Steel Res., 83, 177, 10.1016/j.jcsr.2012.12.008

EN 1993-1-12, 2006

EN 10025-6, 2004