Stress concentration factors in FRP-reinforced tubular DKT joints under axial loads

Chang, 1999, Prediction of stress distributions along the intersection of tubular Y and T-joints, Int J Fatig, 21, 361, 10.1016/S0142-1123(98)00083-8 Fricke, 2003, Fatigue analysis of welded joints: state of development, Mar Struct, 16, 185, 10.1016/S0951-8339(02)00075-8 Zavvar, 2022, Effects of fibre reinforced polymer on stress concentration factors in uniplanar DKT-joints subjected to the compression loading, 249 Gao, 2006, Stress and strain concentrations of completely overlapped tubular joints under lap brace OPB load, Thin-Walled Struct, 44, 861, 10.1016/j.tws.2006.08.017 Cheng, 2018, Parametric FE modeling to predict hot spot stress concentrations of bird-beak SHS joints in offshore structures, Ocean Eng, 160, 54, 10.1016/j.oceaneng.2018.04.077 Shao, 2010, Analysis of stress concentration factor of welded tubular K-joints subjected to axial loads, Chuan Bo Li Xue/Journal Sh Mech., 14, 399 Zhang, 2018, A novel framework for deriving the unified SCF in multi-planar overlapped tubular joints, Mar Struct, 60, 72, 10.1016/j.marstruc.2018.03.008 Liu, 2022, Stress influence matrix on hot spot stress analysis for welded tubular joint in offshore jacket structure, Ocean Eng, 251, 10.1016/j.oceaneng.2022.111103 Jiang, 2018, Prediction of stress concentration factor distribution for multi-planar tubular DT-joints under axial loads, Mar Struct, 61, 434, 10.1016/j.marstruc.2018.06.017 Lotfollahi-Yaghin, 2011, Geometric stress distribution along the weld toe of the outer brace in two-planar tubular DKT-joints: parametric study and deriving the SCF design equations, Mar Struct, 24, 239, 10.1016/j.marstruc.2011.02.005 Ahmadi, 2016, The effect of multi-planarity on the SCFs in offshore tubular KT-joints subjected to in-plane and out-of-plane bending loads, Thin-Walled Struct, 106, 148, 10.1016/j.tws.2016.04.020 Zavvar, 2021, Stress concentration factors of multi-planar tubular KT-joints subjected to in-plane bending moments, Mar Struct, 78, 10.1016/j.marstruc.2021.103000 Ahmadi, 2020, Degree of bending (DoB) in offshore tubular KT-joints under the axial, in-plane bending (IPB), and out-of-plane bending (OPB) loads, Appl Ocean Res, 95, 10.1016/j.apor.2019.102015 Zavvar, 2019, Degree of bending (Dob) induced by out-of-plane bending (OPB) loading in tubular KT-joints of jacket structures, 8th Int Offshore Ind Conf. Published online Ahmadi, 2016, Probabilistic analysis of stress concentration factors in tubular KT-joints reinforced with internal ring stiffeners under in-plane bending loads, Thin-Walled Struct, 99, 58, 10.1016/j.tws.2015.11.010 Ahmadi, 2015, Stress concentration factors induced by out-of-plane bending loads in ring-stiffened tubular KT-joints of jacket structures, Thin-Walled Struct, 91, 82, 10.1016/j.tws.2015.02.011 Nassiraei, 2021, SCFs in tubular X-joints retrofitted with FRP under out-of-plane bending moment, Mar Struct, 79, 10.1016/j.marstruc.2021.103010 Soh, 1995, Stress analysis of axially loaded T tubular joints reinforced with doubler plates, Comput Struct, 55, 141, 10.1016/0045-7949(94)00412-V Nassiraei, 2018, Structural behavior of tubular X-joints strengthened with collar plate under axially compressive load at elevated temperatures, Mar Struct, 61, 46, 10.1016/j.marstruc.2018.03.012 Nassiraei, 2018, Static strength of X-joints reinforced with collar plates subjected to brace tensile loading, Ocean Eng, 161, 227, 10.1016/j.oceaneng.2018.05.017 Cho, 1991, Ultimate strength of specially reinforced tubular joint with brackets, Mar Struct, 4, 57, 10.1016/0951-8339(91)90024-6 Qian, 2014, Fatigue and residual strength of concrete-filled tubular X-joints with full capacity welds, J Constr Steel Res, 100, 21, 10.1016/j.jcsr.2014.04.021 Morahan, 1996, New data on the fatigue and ultimate limit state of grouted tubular joints, vol. 2, 467 Chen, 2007, Longitudinal strength analysis of ship hulls of composite materials under sagging moments, Compos Struct, 77, 36, 10.1016/j.compstruct.2005.06.002 Weitzenböck, 2010, Application of composites in ships and offshore - a review and outlook, 1 Shi, 2021, Ultimate strength of a cracked stiffened panel repaired by CFRP and stop holes, Ocean Eng, 226, 10.1016/j.oceaneng.2021.108850 Zhao, 2007, State-of-the-art review on FRP strengthened steel structures, Eng Struct, 29, 1808, 10.1016/j.engstruct.2006.10.006 T, 2010, Stress-Strain behavior of concrete in hybrid FRP-concrete-steel Double-skin tubular columns, J Struct Eng, 136, 379, 10.1061/(ASCE)ST.1943-541X.0000121 Lin, 2020, Behavior of large-scale FRP-confined rectangular RC columns under eccentric compression, Eng Struct, 216, 10.1016/j.engstruct.2020.110759 Xu, 2022, Stress concentration factor (SCF) of CHS gap TT-joints reinforced with CFRP, Ocean Eng, 247, 10.1016/j.oceaneng.2022.110722 Sadat Hosseini, 2021, Stress concentration factors in FRP-strengthened steel tubular KT-joints, Appl Ocean Res, 108 Nassiraei, 2020, Stress concentration factors in tubular T/Y-joints strengthened with FRP subjected to compressive load in offshore structures, Int J Fatig, 140, 10.1016/j.ijfatigue.2020.105719 Nassiraei, 2021, Stress concentration factors in tubular T/Y-connections reinforced with FRP under in-plane bending load, Mar Struct, 76, 10.1016/j.marstruc.2020.102871 Nassiraei, 2021, Parametric study and formula for SCFs of FRP-strengthened CHS T/Y-joints under out-of-plane bending load, Ocean Eng, 221, 10.1016/j.oceaneng.2020.108313 Zhao, 2006, CFRP strengthened RHS subjected to transverse end bearing force, Eng Struct, 28, 1555, 10.1016/j.engstruct.2006.02.008 Zavvar, 2021, Stress concentration factors in steel tubular KT-connections with FRP-Wrapping under bending moments, Structures, 33, 4743, 10.1016/j.istruc.2021.06.100 Lesani, 2013, Numerical investigation of FRP-strengthened tubular T-joints under axial compressive loads, Compos Struct, 100, 71, 10.1016/j.compstruct.2012.12.020 Nassiraei, 2021, SCFs in tubular X-connections retrofitted with FRP under in-plane bending load, Compos Struct, 274, 10.1016/j.compstruct.2021.114314 Nassiraei, 2021, Stress concentration factors in tubular X-connections retrofitted with FRP under compressive load, Ocean Eng, 229, 10.1016/j.oceaneng.2020.108562 1997 Chiew, 1999, Experimental and numerical stress analyses of tubular XT-joint, J Struct Eng, 125, 11, 10.1061/(ASCE)0733-9445(1999)125:11(1239) 1992, Stress concentration factors for tubular complex joints, OTH, 91 353 Sadat Hosseini, 2020, Experimental and parametric studies of SCFs in FRP strengthened tubular T-joints under axially loaded brace, Eng Struct, 213 Tong, 2019, Experimental and theoretical studies on reducing hot spot stress on CHS gap K-joints with CFRP strengthening, Eng Struct, 201, 10.1016/j.engstruct.2019.109827 American Petroleum Institute (API), 2020 Efthymiou, 1988, Development of SCF formulae and generalised influence functions for use in fatigue analysis, Proc Conf Recent Dev Tubul Joints Technol Smedley, 1991, Stress concentration factors for simple tubular joints Zavvar, 2018, Parametric study of degree of bending in tubular KT-joints under the IPB loading, Conf Int Conf Coasts, Ports Mar Struct (ICOPMAS 2018) Ports Marit Organ 2002 Sadat Hosseini, 2019, Parametric study of FRP strengthening on stress concentration factors in an offshore tubular T-joint subjected to in-plane and out-of-plane bending moments, Int J Steel Struct, 19, 1755, 10.1007/s13296-019-00244-0 N'Diaye, 2009, Stress concentration factor analysis for welded, notched tubular T-joints under combined axial, bending and dynamic loading, Int J Fatig, 31, 367, 10.1016/j.ijfatigue.2008.07.014 Zavvar, 2016, Parametric study of stress concentration factors in three-planar tubular KT-joints subjected to out-of-plane bending loads, Conf Int Conf Coasts, Ports Mar Struct (ICOPMAS 2016) Ports Marit Organ 1999 1996 Kollar, 2003 Bisby, 2004, Performance of fire of FRP-confined reinforced concrete columns, 4th Int Conf Adv Compos Mater Bridg Struct. Published online, 1