Stress Corrosion Cracking Behavior of Welded Joints in 304 Stainless Steel Flange Neck on a Tandem Mixer

E.O.S. Somarriba, M.D. Bowman, Pack rust mitigation strategies for flange splice connections in steel bridges. Transport. Res. Rec. 2677(10), 646–661 (2023)

G. Li, W. Wang, X. Duan, B. Dong, Axial load capacity and failure mechanism of flange and ring joints of process piping system. J. Constr. Steel Res. 178, 106492 (2021)

L.Z. Zhang, Y. Liu, J.C. Sun, K. Ma, R.L. Cai, K.S. Guan, research on the assembly pattern of MMC bolted flange joint. Procedia Eng. 130, 193–203 (2015)

P. Velmurugan, J. Manohar, C. Ramesh Kannan, S. Manivannan, J. Vairamuthu, B. Stalin, A study on development of induction welding of thermoplastic composites, in IOP Conference Series: Materials Science and Engineering, vol. 988, no. 1 (2020)

Z. Xia, Y. Huang, J. Zhong, K. Guan, Cracking failure analysis on a high-frequency electric resistance welding pipe in buried fire water pipeline. Eng. Fail. Anal. 146, 107072 (2023)

S. Zhang, S. Romo, R.A. Giorjao, K.C. Riffel, A.J. Ramirez, Investigating the impact of weld dilution and local mismatch on the low-cycle fatigue failure of Alloy 182 dissimilar weld transition under intermediate isothermal condition. Eng. Fail. Anal. 146, 107112 (2023)

I.G.R. Santos, F.F. de Assis, R. Silva, G. Zepon, C.A.D. Rovere, Corrosion resistance of UNS S41426 stainless steel in acid media and its relation to chemical partition and austenite fraction. Corros. Sci. 188, 109519 (2021)

J. Hu, L.-X. Du, J.-J. Wang, C.-R. Gao, Effect of welding heat input on microstructures and toughness in simulated CGHAZ of V-N high strength steel. Mat. Sci. Eng. A-Struct. 577, 161–168 (2013)

K.G. Vorkachev, P.P. Stepanov, L.I. Éfron, M.M. Kantor, A.V. Chastukhin, S.V. Zharkov, Effect of microstructure on high-strength low-alloy steel welded joint toughness with simulation of heat-affected zone coarse-grained area. Metallurgist. 64(9–10), 875–884 (2021)

X.-N. Wang, Y.-J. Zhao, P.-F. Guo, X.-N. Qi, H.-S. Di, M. Zhang, C.-J. Chen, Effect of heat input on M-A constituent and toughness of coarse grain heat-affected zone in an X100 pipeline steel. J. Mater. Eng. Perform. 28(3), 1810–1821 (2019)

W. Yan, X. Luo, G. Xu, H. Wang, Z. Wang, X. Chen, Significant improvement in CGHAZ toughness of HSLA steel via welding with trailing mechanical treatment. Mat. Sci. Eng. A-Struct. 837, 142725 (2022)

P. Sunil kumar, S.G. Acharyya, S.V. Ramana Rao, K. Kapoor, Surface buffing and its effect on chloride induced SCC of 304L austenitic stainless steel, in IOP Conference Series: Materials Science and Engineering, vol. 314 (2018)

K. Ravindranath, R. Alazemi, Failure of stainless steel 304L air cooler tubes due to stress corrosion cracking caused by organic chlorides. Eng. Fail. Anal. 102, 79–86 (2019)

W. Guo, N. Ding, L. Liu, N. Xu, N. Li, F. Zhang, L. Chen, Stress corrosion cracking of a 304 stainless steel elbow. J. Fail. Anal. Prev. 20(2), 483–493 (2020)

G.G. Scatigno, P. Dong, M.P. Ryan, M.R. Wenman, The effect of salt loading on chloride-induced stress corrosion cracking of 304L austenitic stainless steel under atmospheric conditions. Materialia. 8, 100509 (2019)

X. Li, J. Shu, L. Chen, H. Bi, Effect of Mo and Cu on stress corrosion cracking of ferritic stainless steel in chloride media. Corros. Eng. Sci. Technol. 50(8), 618–627 (2015)

N.S. Zadorozne, M.C. Giordano, A.E. Ares, R.M. Carranza, R.B. Rebak, Anodic characteristics and stress corrosion cracking behavior of nickel rich alloys in bicarbonate and buffer solutions. Corros. Sci. 108, 1–10 (2016)

S. Tokuda, I. Muto, Y. Sugawara, N. Hara, The role of applied stress in the anodic dissolution of sulfide inclusions and pit initiation of stainless steels. Corros. Sci. 183, 109312 (2021)

K.V. Rybalka, L.A. Beketaeva, A.D. Davydov, Study of anodic dissolution of stainless steel in HCl by the method of measuring ohmic resistance. Russ. J. Electrochem. 56(3), 239–242 (2020)

C.-P. Yeh, K.-C. Tsai, J.-Y. Huang, Influence of chloride concentration on stress corrosion cracking and crevice corrosion of austenitic stainless steel in saline environments. Materials. 13(24), 5640 (2020)

S.S. Vinogradova, Y.V. Pleshkova, Staged local dissolution of stainless steel in chloride solutions. Mater. Sci. For. 989, 74–78 (2020)

H.B. Pereira, Z. Panossian, I.P. Baptista, C.R. Azevedo, Investigation of stress corrosion cracking of austenitic, duplex and super duplex stainless steels under drop evaporation test using synthetic seawater. J. Mater. Res. 22(2), e20180211 (2019)

R. Zhu, J. Wang, L. Zhang, Z. Zhang, E.-H. Han, Stress corrosion cracking of 316L HAZ for 316L stainless steel/Inconel 52M dissimilar metal weld joint in simulated primary water. Corros. Sci. 112, 373–384 (2016)

L. Dong, X. Zhang, Y. Han, Q. Peng, P. Deng, S. Wang, Effect of surface treatments on microstructure and stress corrosion cracking behavior of 308L weld metal in a primary pressurized water reactor environment. Corros. Sci. 166, 108465 (2020)

S.P. Ambade, A. Sharma, A.P. Patil, Y.M. Puri, Effect of welding processes and heat input on corrosion behaviour of Ferritic stainless steel 409M. Mater. Today Proc. 41, 1018–1023 (2021)

Y. Luo, W. Gu, W. Peng, Q. Jin, Q. Qin, C. Yi, A study on microstructure, residual stresses and stress corrosion cracking of repair welding on 304 stainless steel: part I-effects of heat input. Materials. 13(10), 2416 (2020)

Q. Wu, T. Han, Y. Wang, H. Wang, H. Zhang, S. Gu, In-situ observation of high-temperature failure behavior of pipeline steel and investigation on burn-through mechanism during in-service welding. Eng. Fail. Anal. 109, 104236 (2020)

I. Calderon-Uriszar-Aldaca, E. Briz, H. Garcia, A. Matanza, The weldability of duplex stainless-steel in structural components to withstand corrosive marine environments. Metals. 10(11), 1475 (2020)

J. Li, H. Li, Y. Liang, P. Liu, L. Yang, Y. Wang, Effects of heat input and cooling rate during welding on intergranular corrosion behavior of high nitrogen austenitic stainless steel welded joints. Corros. Sci. 166, 108445 (2020)

C. Pandey, N. Saini, M.M. Mahapatra, P. Kumar, Study of the fracture surface morphology of impact and tensile tested cast and forged (C&F) Grade 91 steel at room temperature for different heat treatment regimes. Eng. Fail. Anal. 71, 131–147 (2017)

F.M.F. Serafim, W.O. Alabi, I.N.A. Oguocha, A.G. Odeshi, R. Evitts, R.J. Gerspacher, E.G. Ohaeri, Stress corrosion cracking behavior of selected stainless steels in saturated potash brine solution at different temperatures. Corros. Sci. 178, 109025 (2021)

A. Hojná, Overview of intergranular fracture of neutron irradiated austenitic stainless steels. Metals. 7(10), 392 (2017)

Y. Hong, X. Wang, Y. Wang, Z. Zhang, Study on reducing the risk of stress corrosion cracking of austenitic stainless steel hydraulically expanded joints. Eng. Fail. Anal. 113, 104560 (2020)

G. Cai, Y. Pang, Y. Huang, R.D.K. Misra, Roles of inclusion, texture and grain boundary in corrosion resistance of low-nickel austenite stainless steel containing Ce. ISIJ Int. 59(12), 2302–2310 (2019)

D. Du, K. Chen, H. Lu, L. Zhang, X. Shi, X. Xu, P.L. Andresen, Effects of chloride and oxygen on stress corrosion cracking of cold worked 316/316L austenitic stainless steel in high temperature water. Corros. Sci. 110, 134–142 (2016)

S. Ghosh Acharyya, M.K. Kumar, V. Kain, Studying the mechanism behind stress corrosion cracking of non sensitized 304l austenitic stainless steel. Adv. Mater. Res. 794, 564–574 (2013)

Y.H. Lu, Q.J. Peng, T. Sato, T. Shoji, An ATEM study of oxidation behavior of SCC crack tips in 304L stainless steel in high temperature oxygenated water. J. Nucl. Mater. 347(1–2), 52–68 (2005)

M. Akita, Y. Uematsu, T. Kakiuchi, M. Nakajima, Y. Agata, K. Takino, Joint microstructures, mechanical properties and fatigue behaviour of ferritic stainless steel SUS 430 welds with different filler metals. Weld. Int. 32(6), 427–435 (2018)

D. Das, D.K. Pratihar, G.G. Roy, Cooling rate predictions and its correlation with grain characteristics during electron beam welding of stainless steel. Int. J. Adv. Manuf. Technol. 97(5–8), 2241–2254 (2018)

J. Zhang, L. Yu, Z. Ma, Y. Liu, C. Liu, H. Li, H. Wang, Characterization of microstructure and stress corrosion cracking susceptibility in a multi-pass austenitic stainless steel weld joint by narrow-gap TIG. Metall. Mater. Trans. A. 51(9), 4549–4562 (2020)

S.-M. Jung, I.-D. Park, K.-H. Lee, J. Suh, G.-Y. Kim, K.-W. Nam, Study on mechanical properties of austenitic stainless steel depending on heat input at laser welding. J. Mech. Sci. Technol. 34(1), 117–126 (2020)