Strengthening and Toughening CNTs/Mg Composites by OpTimizing the Grinding Time of Magnesium Powder
Tóm tắt
In this paper, CNT/Mg composites with high compressive properties were prepared by using Ni-plated CNT and pure magnesium powder as raw materials through the grinding of magnesium powder, ball-milling mixing and hot-pressing sintering. The effect of grinding time for finer magnesium powder on the microstructure and properties of the final composites was studied mainly by SEM, XRD, HRTEM and compression tests. The results show that with the prolongation of milling time, the magnesium particle size decreases gradually and the CNT dispersion becomes more uniform. Moreover, the nickel layer on the surface of CNT reacts with highly active broken magnesium powder in the sintering process to generate MgNi2 intermediate alloy, which significantly improves interface bonding. The strength and fracture strain of composites are significantly increased by the combined action of the uniform distribution of CNTs and strong interface bonding from the MgNi2 phase. The compressive strength, yield strength and fracture strain of the composites, prepared with a 60 h grinding of magnesium powder, reached 268%, 272% and 279% of those in composites without the grinding of magnesium powder.
Từ khóa
Tài liệu tham khảo
Hou, 2020, Combination of enhanced thermal conductivity and strength of MWCNTs reinforced Mg-6Zn matrix composite, J. Alloys Compd., 838, 155573, 10.1016/j.jallcom.2020.155573
Ding, Y., Shi, Z., Li, Z., Jiao, S., Hu, J., Wang, X., Zhang, Y., Wang, H., and Guo, X. (2022). Effect of CNT content on microstructure and properties of CNTs/refined-AZ61 magnesium matrix composites. Nanomaterials, 12.
Shchegolkov, 2022, Synthesis of Carbon Nanotubes Using Microwave Radiation: Technology, Properties, and Structure, Russ. J. Gen. Chem., 92, 1168, 10.1134/S1070363222060329
Yu, 2000, Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties, Phys. Rev. Lett., 84, 5552, 10.1103/PhysRevLett.84.5552
Shchegolkov, A.V., Jang, S., Shchegolkov, A.V., Rodionov, Y.V., and Glivenkova, O.A. (2021). Multistage Mechanical Activation of Multilayer Carbon Nanotubes in Creation of Electric Heaters with Self-Regulating Temperature. Materials, 14.
Ogawa, 2021, Fabrication and the mechanical and physical properties of nanocarbon-reinforced light metal matrix composites: A review and future directions, Mater. Sci. Eng. A-Struct., 820, 141542, 10.1016/j.msea.2021.141542
Han, 2021, Hot Oscillatory Pressing of Carbon Nanotube-Reinforced Copper Matrix Nanocomposite, Nanomaterials, 11, 2411, 10.3390/nano11092411
Liu, 2015, High performance heterogeneous magnesium-based nanocomposite, Mater. Lett., 143, 287, 10.1016/j.matlet.2014.12.099
Eom, 2006, Effects of ball-milling on lithium insertion into multi-walled carbon nanotubes synthesized by thermal chemical vapour deposition, J. Power Source, 157, 507, 10.1016/j.jpowsour.2005.08.024
Kumar, 2018, Tensile, Microhardness, and Microstructural Analysis on Mg-CNT Nano Composites, Mater. Today Proc., 5, 7882, 10.1016/j.matpr.2017.11.469
Alladi, 2021, Recent progress of CNTs reinforcement with metal matrix composites using friction stir processing, Mater. Today Proc., 44, 1731, 10.1016/j.matpr.2020.11.897
Nai, 2014, Interface tailoring to enhance mechanical properties of carbon nanotube reinforced magnesium composites, Mater. Design., 60, 490, 10.1016/j.matdes.2014.04.011
Zein, 2008, Synthesis and Characterization of TiO2 Coated Multiwalled Carbon Nanotubes Using a Sol Gel Method, Ind. Eng. Chem. Res., 47, 6598, 10.1021/ie701770q
Yuan, 2016, Microstructure and mechanical properties of AZ91 alloy reinforced by carbon nanotubes coated with MgO, Carbon, 96, 843, 10.1016/j.carbon.2015.10.018
So, 2013, SiC formation on carbon nanotube surface for improving wettability with aluminum, Compos. Sci. Technol., 74, 6, 10.1016/j.compscitech.2012.09.014
Park, Y., Cho, K., Park, I., and Park, Y. (2011, January 5–9). Fabrication and mechanical properties of magnesium matrix composite reinforced with Si coated carbon nanotubes. Proceedings of the Procedia Engineering 11th International Conference on the Mechanical Behavior of Materials (ICM11), Como, Italy.
Habibi, 2011, Enhanced compressive response of hybrid Mg-CNT nano-composites, J. Mater. Sci., 46, 4588, 10.1007/s10853-011-5358-2
Ding, 2020, High performance carbon nanotube-reinforced magnesium nanocomposite, Mater. Sci. Eng. A, 771, 1, 10.1016/j.msea.2019.138575
Li, 2022, Dynamic Camouflage Characteristics of a Thermal Infrared Film Inspired by Honeycomb Structure, J. Bionic Eng., 19, 458, 10.1007/s42235-021-00141-5
Xiang, 2019, Achieving ultra-high strengthening and toughening efficiency in carbon nanotubes/magnesium composites via constructing micro-nano layered structure, Compos. Part A Appl. Sci. Manuf., 119, 225, 10.1016/j.compositesa.2019.02.006
Suryanarayana, 2006, Mechanical alloying and milling, Prog. Mater. Sci., 46, 1, 10.1016/S0079-6425(99)00010-9
Li, 2009, Improved processing of carbon nanotube/magnesium alloy composites, Compos. Sci. Technol., 69, 1193, 10.1016/j.compscitech.2009.02.020
Paramsothy, 2013, Carbon nanotube addition to concentrated magnesium alloy AZ81: Enhanced ductility with occasional significant increase in strength, Mater. Des., 45, 15, 10.1016/j.matdes.2012.09.001
Rashad, 2014, Synergetic effect of graphene nanoplatelets (GNPs) and multi-walled carbon nanotube (MW-CNTs) on mechanical properties of pure magnesium, J. Alloys Compd., 603, 111, 10.1016/j.jallcom.2014.03.038