Strength of cylindrical butt joints bonded with epoxy adhesives under combined static or high-rate loading

Loureiro, 2000, Comparison of the mechanical behaviour between stiff and flexible adhesive joints for the automotive industry, J Adhes, 86, 765, 10.1080/00218464.2010.482440 Michalos, 2010, Automotive assembly technologies review: challenges and outlook for a flexible and adaptive approach, CIRP J Manuf Sci Technol, 2, 81, 10.1016/j.cirpj.2009.12.001 Goede, 2009, Super Light Car—lightweight construction thanks to a multi-material design and function integration, Eur Transp Res Rev, 1, 5, 10.1007/s12544-008-0001-2 Pethrick, 2015, Design and ageing of adhesives for structural adhesive bonding—a review, Proc Inst Mech Eng Part L, 5, 349 Cognard, 2008, Analysis of the nonlinear behavior of adhesives in bonded assemblies—comparison of TAST and Arcan tests, Int J Adhes Adhes, 28, 393, 10.1016/j.ijadhadh.2008.04.006 Cognard, 2014, On modelling the behavior of a ductile adhesive under low temperatures, Int J Adhes Adhes, 48, 119, 10.1016/j.ijadhadh.2013.09.014 Bresson, 2012, Strength of adhesively bonded joints under mixed axial and shear loading, Int J Adhes Adhes, 35, 27, 10.1016/j.ijadhadh.2011.12.006 Yoshida, 2004, Strength of highly ductile acrylic adhesive in butt-joint under combined tension and torsion, Key Eng Mater, 274-276, 993, 10.4028/www.scientific.net/KEM.274-276.993 Ikegami, 1979, Experimental studies of the strength of an adeshive joint in a state of combined stress, J Adhes, 10, 25, 10.1080/00218467908544609 Castagnetti, 2011, Effect of bondline thickness on the static strength of structural adhesives under nearly-homogeneous shear stresses, J Adhes, 87, 780, 10.1080/00218464.2011.597309 Sato, 2000, Dynamic deformation of lap joints and scarf joints under impact loads, Int J Adhes Adhes, 20, 17, 10.1016/S0143-7496(99)00010-X Maheri, 2002, Determination of dynamic shear modulus of structural adhesives in thick adherend shear test specimens, Int J Adhes Adhes, 22, 119, 10.1016/S0143-7496(01)00043-4 Kadioglu, 2015, Flexible adhesive for automotive application under impact loading, Int J Adhes Adhes, 56, 73, 10.1016/j.ijadhadh.2014.08.001 Hayashida, 2015, Impact strength of joints bonded with high-strength pressure-sensitive adhesive, Int J Adhes Adhes, 56, 61, 10.1016/j.ijadhadh.2014.09.005 Kihara, 2003, A study and evaluation of the shear strength of adhesive layers subjected to impact loads, Int J Adhes Adhes, 23, 253, 10.1016/S0143-7496(03)00004-6 Sankar, 2015, Dynamic strength of single lap joints with similar and dissimilar adherends, Int J Adhes Adhes, 56, 46, 10.1016/j.ijadhadh.2014.07.014 Pohlit, 2008, Evaluating the rate-dependent fracture toughness of an automotive adhesive, J Adhes, 84, 143, 10.1080/00218460801952825 Challita, 2011, Experimental investigation of the shear dynamic behavior of double-lap adhesively bonded joints on a wide range of strain rates, Int J Adhes Adhes, 31, 146, 10.1016/j.ijadhadh.2010.11.014 Zhang, 2015, Experimental study of strain rates effects on the strength of adhesively bonded joints after hygrothermal exposure, Int J Adhes Adhes, 56, 3, 10.1016/j.ijadhadh.2014.07.008 Goglio, 2008, High strain-rate compression and tension behaviour of an epoxy bi-component adhesive, Int J Adhes Adhes, 28, 329, 10.1016/j.ijadhadh.2007.08.004 Yokoyama, 1998, Determination of impact shear strength of adhesive joints with the split hopkinson bar, Key Eng Mater, 145-9, 317, 10.4028/www.scientific.net/KEM.145-149.317 Yokoyama, 2006, Determination of impact tensile properties of structural epoxy adhesive butt joints using a hat-shaped specimen, J Phys IV Fr, 134, 789, 10.1051/jp4:2006134122 Sato, 1999, Strength of adhesively-bonded butt joints of tubes subjected to combined high-rate loads, J Adhes, 70, 57, 10.1080/00218469908010487 Adams, 1996, A critical assessment of the block impact test for measuring the impact strength of adhesive bonds, Int J Adhes Adhes, 16, 61, 10.1016/0143-7496(95)00050-X Marzi, 2009, A rate-dependent cohesive zone model for adhesively bonded joints loaded in mode I, J Adhes Sci Technol, 23, 881, 10.1163/156856109X411238 Alfano, 2007, Cohesive zone modeling of mode i fracture in adhesive bonded joints, Key Eng Mater, 348-9, 13, 10.4028/www.scientific.net/KEM.348-349.13 Blackman, 2009, The fracture behaviour of structural adhesives under high rates of testing, Eng Fract Mech, 76, 2868, 10.1016/j.engfracmech.2009.07.013 Blackman, 2000, The impact wedge-peel performance of structural adhesives, J Mater Sci, 35, 1867, 10.1023/A:1004793730352 Chen, 2011, Fracture toughness of bulk adhesives in mode I and III and curing effect, Int J Fract, 167, 221, 10.1007/s10704-010-9547-9 da Silva, 2010, Mode II fracture toughness of a brittle and a ductile adhesive as a function of the adhesive thickness, J Adhes, 86, 891, 10.1080/00218464.2010.506155 Ikegami, 1996, Benchmark tests on adhesive strengths in butt, single and double lap joints and double-cantilever beams, Int J Adhes Adhes, 16, 219, 10.1016/0143-7496(95)00051-8 Yang, 2001, Elastic–plastic mode-II fracture of adhesive joints, Int J Solids Struct, 38, 3251, 10.1016/S0020-7683(00)00221-3 Adams, 1978, Stress analysis of axisymmetric butt joints loaded in torsion and tension, J Strain Anal Eng Des, 13, 1, 10.1243/03093247V131001 Shindo, 1975, Trial manufacture of dynamic combined load testing machine and a few experiments on mild steel, Proc Jpn S Mech Eng Kansai Branch 234th Meet, 754-10, 45 Lindholm, 1967, A dynamic biaxial testing machine, Exp Mech, 7, 1, 10.1007/BF02326833 Castagnetti, 2010, Robust shape optimization of tubular butt joints for characterizing thin adhesive layers under uniform normal and shear stresses, J Adhes Sci Technol, 24, 1959, 10.1163/016942410X507687 Spaggiari, 2012, Experimental tests on tubular bonded butt specimens: effect of relief grooves on tensile strength of the adhesive, J Adhes, 88, 499, 10.1080/00218464.2012.660831 Spaggiari, 2013, Mixed-mode strength of thin adhesive flims: experimental characterization through a tubular specimen with reduced edge effect, J Adhes, 89, 660, 10.1080/00218464.2012.750243 May, 2015, Rate dependent behavior of crash-optimized adhesives—experimental characterization, model development and simulation, Eng Fract Mech, 133, 112, 10.1016/j.engfracmech.2014.11.006