Strength and Rheology of Cemented Pastefill Using Waste Pitchstone Fines and Common Pozzolans Compared to Using Portland Cement

Boger D, Scales P, Sofra F, Jewell RJ, Fourie A B (2006) Paste and thickened tailings, a guide. Australian Centre for Geomechanics, Nedlands, W.A. Sivakugan N, Rankine RM, Rankine KJ, Rankine KS (2006) Geotechnical considerations in mine backfilling in Australia. J Clean Prod 14(12):1168–1175 Sivakugan N, Veenstra R, Naguleswaran N (2015) Underground mine backfilling in Australia using paste fills and hydraulic fills. Int J Geosynthetics Ground Eng 1(2):18 Panchal S, Deb D, Sreenivas T (2018) Variability in rheology of cemented paste backfill with hydration age, binder and superplasticizer dosages. J Adv Powder Technol 29(9):2211–2220 Clough GW, Sitar N (1981) Bachus RCJ (1989) Cemented sands under static loading. J Geotech Eng Div ASCE 107(6):799–817 Belem T, Benzaazoua M (2008) Design and application of underground mine paste backfill technology. J Geotech Geol Eng 26(2):147–174 Schneider M, Romer M, Tschudin M, Bolio H (2011) Sustainable cement production—present and future. J Cement Concrete Res 41(7):642–650 Barcelo L, Kline J, Walenta G, Gartner E (2014) Cement and carbon emissions. J Materials Struct 47(6):1055–1065 Nagrockiene D, Pundiene I, Kicaite A (2013) The effect of cement type and plasticizer addition on concrete properties. J Construction Build Materials 45:324–331 Yu B, Zeng Z, Ren Q, Chen Y, Liang M, Zou H (2016) Study on the performance of polycarboxylate-based superplasticizers synthesized by reversible addition–fragmentation chain transfer (RAFT) polymerization. J Mol Struct 1120:171–179 Nasir O, Fall M (2010) Coupling binder hydration, temperature and compressive strength development of underground cemented paste backfill at early ages. Tunnelling Underground Space Technol Incorporating Trenchless Technol Res 25(1):9–20 Walker R, Pavía S (2011) Physical properties and reactivity of pozzolans, and their influence on the properties of lime–pozzolan pastes. J Materials Struct 44(6):11391–12150 Nochaiya T, Wongkeo W, Chaipanich A (2010) Utilization of fly ash with silica fume and properties of Portland cement–fly ash–silica fume concrete. J Fuel 89(3):768–774 American Concrete Institute, (2001). Use of raw or processed natural pozzolans in concrete (ACI232.1R-00).ACI Committee, 232. Tuladhar R, Smith M, Pandey GR, Joyce P (2011) Use of pitchstone fine as a partial replacement of Portland cement for sustainable concrete. Proceedings of 2011 international concrete sustainability conference, Boston, USA. Tuladhar R, Sexton A, Joyce P (2013) Durability of concrete with pitchstone fines as a partial cement replacement. Concrete Institute of Australia's Biennial National Conference. Australian Standards AS 1289.3.2.1 (2009) Methods of testing soils for engineering purposes-Soil classification tests- Determination of the plastic limit of a soil. Australian Standards AS 1289.3.4.1 (2008) Methods of testing soils for engineering purposes-Soil classification tests-Determination of the linear shrinkage of a soil. Australian Standards AS 1289.3.5.1 (2006) Methods of testing soils for engineering purposes-Soil classification tests- Determination of the soil particle density of a soil. Australian Standards AS 1289.3.9.1 Methods of testing soils for engineering purposes-Soil classification tests -Determination of the cone liquid limit of a soil. Australian Standards AS 1289.3.6.1 (2009) Methods of testing soils for engineering purposes-Soil classification tests- Determination of the particle size distribution of a soil—Standard method of analysis by sieving. Deng X, Klein B, Tong L, de Wit B (2018) Experimental study on the rheological behaviour of ultra-fine cemented backfill. J Construction Build Materials 158:985–994 Kuganathan K (2005) Rock Fill in Mine Fill, Handbook on Mine Fill, Australian Centre for Geomechanics, Nedlands, W.A: 101–115. Henderson A, Revell M (2005) Basic Mine Fill Materials, Handbook on Mine Fill, Australian centre for geomechanics, Nedlands, W.A: 13- 20. Niroshan N, Sivakugan N, Veenstra RL (2018) Flow characteristics of cemented paste backfill. J Geotech Geol Eng Springer 36:2261–2272 Australian Standards AS 1289.6.4.1 (2016) Methods of testing soils for engineering purposes-Soil strength and consolidation tests -Determination of compressive strength of a soil. Australian Standards AS 1012.10 (2000) Methods of testing concrete-Determination of indirect tensile strength of concrete cylinders (splitting test). ASTM C143 Standard test method for slump of hydraulic-cement concrete, ASTM International. Ray A, Sriravindrarajah R, Guerbois JP, Thomas PS, Border S, Ray HN, Joyce P (2007) Evaluation of waste perlite fines in the production of construction materials. J Therm Anal Calorim 88(1):279–283 ASTM C618 Standard specification for coal fly ash and row or calcined natural pozzolan for use in concrete, ASTM International. Niroshan N, Sivakugan N, Veenstra RL (2017) Laboratory study on strength development in cemented paste backfills. J Mater Civ Eng ASCE 29(7):4017–4027 Vessalas K, Thomas PS, Ray AS, Guerbois JP, Joyce P, Haggman J (2009) Pozzolanic reactivity of the supplementary cementitious material pitchstone fines by thermogravimetric analysis. J Therm Anal Calorim 97(1):71