Strategy of screening and optimization of process parameters using experimental design: application to amoxicillin elimination by adsorption on activated carbon

Zhou, 2009, Pharmaceutical residues in wastewater treatment works effluents and their impact on receiving river water, J. Hazard. Mater., 166, 655, 10.1016/j.jhazmat.2008.11.070 Kümmerer, 2008 Barceló, 2008, Emerging Contaminants from Industrial and Municipal Waste: Occurrence, Analysis and Effects, 5 Ternes, 2004 Andreozzi, 2005, Antibiotic removal from wastewaters: the ozonation of amoxicillin, J. Hazard. Mater., 122, 243, 10.1016/j.jhazmat.2005.03.004 Shaykhi, 2014, Statistical modeling of photocatalytic degradation of synthetic amoxicillin wastewater (SAW) in an immobilized TiO2 photocatalytic reactor using response surface methodology (RSM), J Taiwan Inst Chem Eng., 45, 1717, 10.1016/j.jtice.2013.12.024 Moarefian, 2014, Removal of amoxicillin from wastewater by self-made Polyethersulfone membrane using nanofiltration, J Environ. Health Sci. Eng., 12, 127, 10.1186/s40201-014-0127-1 Adriano, 2005, Adsorption of amoxicillin on chitosan beads: kinetics, equilibrium and validation of finite batch models, Biochem. Eng. J., 27, 132, 10.1016/j.bej.2005.08.010 Demirbas, 2009, Agricultural based activated carbons for the removal of dyes from aqueous solutions, J. Hazard. Mater., 167, 1, 10.1016/j.jhazmat.2008.12.114 Moussavi, 2013, Preparation, characterization and adsorption potential of the NH4Cl-induced activated carbon for the removal of amoxicillin antibiotic from water, Chem. Eng. J., 217, 119, 10.1016/j.cej.2012.11.069 Khezami, 2005, Production and characterization of activated carbon from wood components in powder: cellulose, lignin, xylan, J.Powder Technology, 157, 48, 10.1016/j.powtec.2005.05.009 Adiuata, 2007, Preparation and characterization of activated carbon from palm shell by chemical, Bioresour. Technol., 98, 145, 10.1016/j.biortech.2005.11.006 FAO Berthouex, 2002 Kwak, 2005, Application of Taguchi and response surface methodologies for geometric error in surface grinding process, Int. J. Mach. Tools Manuf., 45, 327, 10.1016/j.ijmachtools.2004.08.007 Karacan, 2007, Optimization of manufacturing conditions for activated carbon from Turkish lignite by chemical activation using response surface methodology, Appl. Therm. Eng., 27, 1212, 10.1016/j.applthermaleng.2006.02.046 Alam, 2009, The factors affecting the performance of activated carbon prepared from oil palm empty fruit bunches for adsorption of phenol, Chem. Eng. J., 155, 191, 10.1016/j.cej.2009.07.033 Samar, 2012, Optimization of preparation conditions for activated carbons from date stones using response surface methodology, Powder Technol., 224, 101, 10.1016/j.powtec.2012.02.037 Özdemir, 2011, Process optimization for Cr(VI) adsorption onto activated carbons by experimental design, Chem. Eng. J., 172, 207, 10.1016/j.cej.2011.05.091 Neeru, 2014, Optimization study of adsorption parameters for removal of phenol on aluminum impregnated fly ash using response surface methodology, J. Taiwan Inst. Chem. Eng., 45, 825 Kim, 2001, Production of granular activated carbon from waste walnut shell and its adsorption characteristics for Cu2+ ion, J. Hazard. Mater. B, 85, 301, 10.1016/S0304-3894(01)00239-4 Orfao, 2006, Adsorption of reactive dye on chemically modified activated carbon—influence of pH, Adv. Colloid Interf. Sci., 296, 480, 10.1016/j.jcis.2005.09.063 Eriksson, 1999 Montgomery, 2001 Box, 1978 Box, 1957, Multi-factor experimental design for exploring response surfaces, 28, 195 Kalavathy, 2009, Modelling, analysis and optimization of adsorption parameters for H3PO4 activated rubber wood sawdust using response surface methodology (RSM), Colloids Surf., B, 70, 35, 10.1016/j.colsurfb.2008.12.007 Azargohar, 2005, Production of activated carbon from luscar char: experimental and modeling studies, Micropor. Mesopor. Mater., 85, 219, 10.1016/j.micromeso.2005.06.018 Chowdhury, 2011, Application of central composite design for preparation of Kenaf fiber based activated carbon for adsorption of manganese (II) ion, Int. J. Phys. Sci., 6, 7191 Yetilmezsoy, 2009, Response surface modeling of Pb(II) removal from aqueous solution by Pistacia vera L.: Box–Behnken experimental design, J. Hazard. Mater., 171, 551, 10.1016/j.jhazmat.2009.06.035 Kunwar, 2011, Optimizing adsorption of crystal violet dye from water by magnetic nanocomposite using response surface modeling approach, J. Hazard. Mater., 186, 1462, 10.1016/j.jhazmat.2010.12.032 Hamilton, 2004 Hamilton, 2004 Sérgio L.C. Ferreira, Walter N.L. dos Santos, Cristina M. Quintella, Benicio B. Neto, Juan M. Bosque-Sendra. Doehlert matrix: a chemometric tool for analytical chemistry—review. Talanta 63 (2004) 1061–1067 Donald, 1986 Kubilay, 2007, Removal of Cu(II), Zn(II) and Co(II) ions from aqueous solutions by adsorption onto natural bentonite, Adsorption, 13, 41, 10.1007/s10450-007-9003-y Echeverria, 1998, Competitive sorption of heavy metal by soils. Isotherms and fractional factorial experiments, Environ. Pollut., 101, 275, 10.1016/S0269-7491(98)00038-4 Beg, 2003, Statistical media optimization and alkaline protease production from Bacillus mojavensis in a bioreactor, Process Biochem., 39, 203, 10.1016/S0032-9592(03)00064-5 Dawson, 1998, Using response surface analysis to optimize the quality of ultrapasteurized liquid whole egg, Poult. Sci., 77, 468, 10.1093/ps/77.3.468 Caqueret, 2008, Optimization of the operating conditions for the removal of alcoholic insoluble compounds contained in sugar beet vinasse, Chem. Eng. J., 145, 203, 10.1016/j.cej.2008.04.020 Wu, 2009, Effect of the sulfidation process on the mechanical properties of a CoMoP/Al2O3 hydrotreating catalyst, Chem. Eng. Sci., 64, 198, 10.1016/j.ces.2008.10.014