Strata-pressure behavior of double-unit mining method combining fully-mechanized and mechanized coal face
Tóm tắt
Based on the engineering background of double-unit face mining under complicated geological conditions and the lagging fully-mechanized face surpassing the fore mechanized face of double-unit face in Zhou Yuanshan coal mine, strata-pressure behavior in the process was analyzed based on FLAC3D and on-site measurement. The results show that the stress concentration factor of superposition abutment pressure and the alternate distance of double-unit face are meeting gauss function, the relationship between the depth of stress concentration point and alternate distance also meets gaussian function. When the alternate distance is larger than 24 m, the superimposition of pilot support pressure in the double-unit face is weak. When the alternate distance is more than 12–15 m, the changes of the roof subsidence coefficient and the depth of stress concentration point are stabilized; when the alternate distance is 3–6 m, the fore working face end is in the greatest impact area of superposition abutment pressure, this area should be avoided in determining the reasonable alternate distance.
Tài liệu tham khảo
Cao Y F, 2005. Double-unit coal mining technology for thin seam coal mining face with road retained for next sublevel. Coal Science and Technology, 33(9): 15–16.
Chen S W, Guo J F, Zhang Y S, 2004. The technology of double-unit face mining share with return air system. Coal Engineering, (9): 7–8.
Chen X H, Ma M S, Yan Z Q, 2005. The analysis of the strata control data of double-unit and single faces. Journal of Hebei Institute of Technology, 25(1): 2–5.
Li T M, Shi J X, 1995. Strata behavior characteristics of double unit face in horizontal thick seam mining. Coal Mine Safety, (9): 6–9.
Ma J J, Wang Y G, Zhao Y F, 2003. Observation of underground pressure of floor strata due to double longwall mining on confined aquifer. Shandong Coal Science and Technology, (3): 57–58.
Peng S P, Luo L P, Wang J A, 2003. Determination of rational staggered distance in double-long wall faces in mining on confined aquifer. Chinese Journal of Rock Mechanics and Engineering, 22(l): 48–52.
Qian M G, Shi P W, 2003. Ground pressure and strata control. Xuzhou: China University of Mining and Technology Press.
Qin W L, Dai R L, 2002. Practice of double-unit face mining technology under complex geological conditions. Journal of Shandong University of Science and Technology (Natural Science Edition), 21(2): 83–85.
Shao J F, 2012. Study on mining technology of double-unit face in thin seam. Master’s thesis, Taiyuan University of Technology.
Wang J A, Peng S P, Meng Z P, 2002. Fracture characteristics of floor strata due to double longwall mining on confined aquifer. Journal of University of Science and Technology Beijing, 24(3): 243–247.
Wu G Q, 2011. The practice of double-faced united corner blocks segment in mine. Value Engineering, (12): 246.
Wu K, Zhou M, Ge J X, Yu F D, 1999. Ground and building deformation for mining under village using two double unit faces. Journal of China University of Mining & Technology, 28(2): 139–141.
Xu Y Q, 2003. Mining science. Xuzhou: China University of Mining and Technology Press.
Yu M X, Li G Y, Chen X H, Zhang Z Q, Zhang H J, LU G Y, 2006. Roof management practice on transportation lane safety exports in opposite pulling faces. Jiangxi Coal Science & Technology, (3): 24–25.
Zhang W S, Sun Q S, Song H L, 2007. The mining technology of fully mechanized mining, usual mining, rotation, hilt and double unit face on thin coal seam of Tianchen mine. China Mining Magazine, 16(3): 67–70.