Strain-induced stiffness-dependent structural changes and the associated failure mechanism in TBCs

Padture, 2002, Materials science—thermal barrier coatings for gas-turbine engine applications, Science, 296, 280, 10.1126/science.1068609 Vassen, 2009, Recent developments in the field of thermal barrier coatings, J. Therm. Spray Technol., 18, 181, 10.1007/s11666-009-9312-7 Hardwicke, 2013, Advances in thermal spray coatings for gas turbines and energy generation: a review, J. Therm. Spray Technol., 22, 564, 10.1007/s11666-013-9904-0 Tian, 2005, Recent developments in zirconia thermal barrier coatings, Surf. Rev. Lett., 12, 369, 10.1142/S0218625X05007207 Chi, 2008, Microstructure-thermal conductivity relationships for plasma-sprayed yttria-stabilized zirconia coatings, J. Am. Ceram. Soc., 91, 2636, 10.1111/j.1551-2916.2008.02476.x Li, 2013, Evolution of lamellar interface cracks during isothermal cyclic test of plasma-sprayed 8YSZ coating with a columnar-structured YSZ interlayer, J. Therm. Spray Technol., 22, 1374, 10.1007/s11666-013-9965-0 Dong, 2014, Effect of TGO thickness on thermal cyclic lifetime and failure mode of plasma- sprayed TBCs, J. Am. Ceram. Soc., 97, 1226, 10.1111/jace.12868 Hasselman, 1987, Thermal-diffusivity and conductivity of dense polycrystalline ZrO2 ceramics-a survey, Am. Ceram. Soc. Bull., 66, 799 Lu, 2007, Constrained sintering of YSZ/Al2O3 composite coatings on metal substrates produced from eletrophoretic deposition, J. Eur. Ceram. Soc., 27, 2613, 10.1016/j.jeurceramsoc.2006.09.016 Cipitria, 2009, A sintering model for plasma-sprayed zirconia TBCs. Part I: free-standing coatings, Acta Mater., 57, 980, 10.1016/j.actamat.2008.10.024 Bakan, 2015, Porosity-property relationships of plasma-sprayed Gd2Zr2O7/YSZ thermal barrier coatings, J. Am. Ceram. Soc., 98, 2647, 10.1111/jace.13611 Cao, 2004, Ceramic materials for thermal barrier coatings, J. Eur. Ceram. Soc., 24, 1, 10.1016/S0955-2219(03)00129-8 Drexler, 2011, Air-plasma-sprayed thermal barrier coatings that are resistant to high-temperature attack by glassy deposits, Acta Mater., 59 Chen, 2007, Thermal stability of air plasma spray and solution precursor plasma spray thermal barrier coatings, J. Am. Ceram. Soc., 90, 3160, 10.1111/j.1551-2916.2007.01864.x Paul, 2009, Sintering characteristics of plasma sprayed zirconia coatings containing different stabilisers, Surf. Coat. Technol., 203, 1069, 10.1016/j.surfcoat.2008.09.037 Thompson, 2001, The effect of heat treatment on the stiffness of zirconia top coats in plasma-sprayed TBCs, Acta Mater., 49, 1565, 10.1016/S1359-6454(01)00065-9 Lima, 2005, Elastic modulus measurements via laser-ultrasonic and Knoop indentation techniques in thermally sprayed coatings, J. Therm. Spray Technol., 14, 52, 10.1361/10599630522701 Guo, 2004, Young's moduli of zirconia top-coat and thermally grown oxide in a plasma-sprayed thermal barrier coating system, Scripta Mater., 50, 1401, 10.1016/j.scriptamat.2004.02.025 Tan, 2010, Anisotropic elastic properties of thermal spray coatings determined via resonant ultrasound spectroscopy, Acta Mater., 58, 5305, 10.1016/j.actamat.2010.06.003 Clarke, 2003, Materials design for the next generation thermal barrier coatings, Annu. Rev. Mater. Res., 33, 383, 10.1146/annurev.matsci.33.011403.113718 Clarke, 2005, Thermal barrier coating materials, Mater. Today, 8, 22, 10.1016/S1369-7021(05)70934-2 Clarke, 2003, Materials selection guidelines for low thermal conductivity thermal barrier coatings, Surf. Coat. Technol., 163, 67, 10.1016/S0257-8972(02)00593-5 Ohmori, 1991, Quantitative characterization of the structure of plasma-sprayed Al2O3 coating by using copper electroplating, Thin Solid Films, 201, 241, 10.1016/0040-6090(91)90114-D Li, 2002, Relationships between the microstructure and properties of thermally sprayed deposits, J. Therm. Spray Technol., 11, 365, 10.1361/105996302770348754 Xie, 2013, Modeling thermal conductivity of thermally sprayed coatings with intrasplat cracks, J. Therm. Spray Technol., 22, 1328, 10.1007/s11666-013-0005-x Li, 2015, Relationship between lamellar structure and elastic modulus of thermally sprayed thermal barrier coatings with intra-splat cracks, J. Therm. Spray Technol., 24, 1355, 10.1007/s11666-015-0292-5 Ratzer-Scheibe, 2007, The effects of heat treatment and gas atmosphere on the thermal conductivity of APS and EB-PVD PYSZ thermal barrier coatings, Surf. Coat. Technol., 201, 7880, 10.1016/j.surfcoat.2007.03.028 Markocsan, 2009, Effect of thermal aging on microstructure and functional properties of zirconia-base thermal barrier coatings, J. Therm. Spray Technol., 18, 201, 10.1007/s11666-009-9313-6 Dutton, 2000, Effect of heat treatment on the thermal conductivity of plasma-sprayed thermal barrier coatings, J. Therm. Spray Technol., 9, 204, 10.1361/105996300770349935 Vassen, 2001, Influence of impurity content and porosity of plasma-sprayed yttria-stabilized zirconia layers on the sintering behaviour, Surf. Coat. Technol., 141, 135, 10.1016/S0257-8972(01)01269-5 Anderson, 2005, Effect of isothermal heat treatment on plasma-sprayed yttria-stabilized zirconia studied by impedance spectroscopy, J. Am. Ceram. Soc., 88, 324, 10.1111/j.1551-2916.2005.00088.x Cernuschi, 2008, Thermophysical, mechanical and microstructural characterization of aged free-standing plasma-sprayed zirconia coatings, Acta Mater., 56, 4477, 10.1016/j.actamat.2008.04.067 Cipitria, 2009, A sintering model for plasma-sprayed zirconia thermal barrier coatings. Part II: coatings bonded to a rigid substrate, Acta Mater., 57, 993, 10.1016/j.actamat.2008.10.058 Qian, 2003, Tensile damage evolution behavior in plasma-sprayed thermal barrier coating system, Surf. Coat. Technol., 173, 178, 10.1016/S0257-8972(03)00429-8 Chen, 2011, Tensile fracture behavior of thermal barrier coatings on superalloy, Surf. Coat. Technol., 205, 3931, 10.1016/j.surfcoat.2011.02.005 Tzimas, 2000, Failure of thermal barrier coating systems under cyclic thermomechanical loading, Acta Mater., 48, 4699, 10.1016/S1359-6454(00)00260-3 Bartlett, 1995, Failure mechanisms of a zirconia-8wt% yttria thermal barrier coating, J. Am. Ceram. Soc., 78, 1018, 10.1111/j.1151-2916.1995.tb08431.x Zhou, 2004, Effect of surface pre-crack morphology on the fracture of thermal barrier coatings under thermal shock, Acta Mater., 52, 4189, 10.1016/j.actamat.2004.05.035 Fan, 2012, Effect of periodic surface cracks on the interfacial fracture of thermal barrier coating system, Appl. Surf. Sci., 258, 9816, 10.1016/j.apsusc.2012.06.036 Shinozaki, 2013, A methodology based on sintering-induced stiffening, for prediction of the spallation lifetime of plasma-sprayed coatings, Acta Mater., 61, 579, 10.1016/j.actamat.2012.09.079 Yang, 2013, Critical bonding temperature for the splat bonding formation during plasma spraying of ceramic materials, Surf. Coat. Technol., 235, 841, 10.1016/j.surfcoat.2013.09.010 Guo, 2006, Microstructures and properties of plasma-sprayed segmented thermal barrier coatings, J. Am. Ceram. Soc., 89, 1432, 10.1111/j.1551-2916.2005.00912.x Jadhav, 2006, Low-thermal-conductivity plasma-sprayed thermal barrier coatings with engineered microstructures, Acta Mater., 54, 3343, 10.1016/j.actamat.2006.03.024 Sampath, 1999, Substrate temperature effects on splat formation, microstructure development and properties of plasma sprayed coatings Part I: case study for partially stabilized zirconia, Mater. Sci. Eng. A:-Struct., 272, 181, 10.1016/S0921-5093(99)00459-1 Chraska, 2002, Effect of different substrate conditions upon interface with plasma sprayed zirconia—a TEM study, Surf. Coat. Technol., 157, 238, 10.1016/S0257-8972(02)00181-0 Xing, 2008, Influence of microstructure on the ionic conductivity of plasma-sprayed yttria-stabilized zirconia deposits, J. Am. Ceram. Soc., 91, 3931, 10.1111/j.1551-2916.2008.02775.x Bertrand, 2008, Surf. Coat. Technol., 202, 1994, 10.1016/j.surfcoat.2007.08.042 Liu, 2015, Morphology and size evolution of interlamellar two-dimensional pores in plasma-sprayed La2Zr2O7 coatings during thermal exposure at 1300°C, J Therm. Spray Technol., 24, 739, 10.1007/s11666-015-0236-0 Zhou, 2011, Assessment of elastic properties of coatings by three-point bending and nanoindentation, J. Coat. Technol. Res., 8, 355, 10.1007/s11998-010-9313-y Li, 2017, Strain-induced multiscale structural changes in lamellar thermal barrier coatings, Ceram. Int., 43, 2252, 10.1016/j.ceramint.2016.11.009 Limarga, 2011, Stress distributions in plasma-sprayed thermal barrier coatings under thermal cycling in a temperature gradient, J. Appl. Mech.-T. ASME, 78, 1, 10.1115/1.4002209 Ahmed, 2011, Stress evolution and cracking of crystalline diamond thin films on ductile titanium substrate: analysis by micro-Raman spectroscopy and analytical modelling, Acta Mater., 59, 5422, 10.1016/j.actamat.2011.05.015 Handge, 2002, Analysis of a shear-lag model with nonlinear elastic stress transfer for sequential cracking of polymer coatings, J. Mater. Sci., 37, 4775, 10.1023/A:1020814314019 Leterrier, 2003, Durability of nanosized oxygen-barrier coatings on polymers—internal stresses, Prog. Mater. Sci., 48, 1, 10.1016/S0079-6425(02)00002-6 Li, 2004, Quantitative characterization of lamellar microstructure of plasma-sprayed ceramic coatings through visualization of void distribution, Mater. Sci. Eng. A:-Struct., 386, 10, 10.1016/S0921-5093(04)00900-1 Li, 2010, Relation between microstructure and thermal conductivity of plasma-sprayed 8YSZ coating, Int. J. Mod. Phys. B, 24, 3017, 10.1142/S021797921006601X Yang, 2013, Characterization of nonmelted particles and molten splats in plasma-sprayed Al2O3 coatings by a combination of scanning electron microscopy X-ray diffraction analysis, and confocal raman analysis, J. Therm. Spray Technol., 22, 131, 10.1007/s11666-012-9863-x Venkataraman, 2006, A study on phase stability observed in as sprayed Alumina-13wt.% Titania coatings grown by detonation gun and plasma spraying on low alloy steel substrates, Surf. Coat. Technol., 201, 3087, 10.1016/j.surfcoat.2006.06.037 Fukanuma, 1994, A porosity formation and flattening model of an impinging molten particle in thermal spray coatings, J. Therm. Spray Technol., 3, 33, 10.1007/BF02648997 Kuroda, 1995, Quenching stress in plasma-sprayed coatings and its correlation with the deposit microstructure, J. Therm. Spray Technol., 4, 75, 10.1007/BF02648531 Kroupa, 1999, Pressure dependence of Young's moduli of thermal sprayed materials, Scripta Mater., 40, 1249, 10.1016/S1359-6462(99)00120-7