Straightening of sheet with correction of waviness

Slonim, A.Z. and Sonin, A.L., Pravka listovogo i sortovogo prokata (Straightening of Rolled Sheet and Bar), Moscow: Metallurgiya. 1981.

Nedorezov, I.V., Orlov, B.Ya., and Vinokurskii, A.Kh., Improving roller sheet-straightening machines at AO Uralmash, Trudy pervogo Kongressa prokatchikov. Magnitogorsk, 23–27 oktyabrya, 1995 (Proceedings of the First Congress of Rolling Specialists, Magnitogorsk, October 23–27, 1995), Moscow: Chermetinformatsiya, 1996, pp. 38–42.

Korolev, A.A., Mekhanicheskoe oborudovanie prokatnykh i trubnykh tsekhov (Mechanical Equipment in Rolling and Pipe Shops), Moscow: Metallurgiya. 1987.

Lugovskoi, V.M., Calculation of sheet-straightening machines and automation of their design, Tr. VNIImetmash (Proceedings of the All-Union Research Institute of Metallurgical Machinery), Moscow: Metallurgiya. 1970, no. 26, pp. 8–30.

Shinkin, V.N., Parameter calculation for the straightening of steel sheet on an 11-roller straightening machine in the Fagor Arrasate transverse-cutting line, Proizv. Prokata. 2014, no. 8, pp. 26–34.

Park, K. and Hwang, S., Development of a finite element analysis program for roller leveling and application for removing blanking bow defects of thin steel sheet, ISIJ Intern.. 2002, vol. 42, no. 9, pp. 990–999; http://dx.doi.org/ 10.2355/isijinternational.42.990 .

Cui, L., Hu, X., and Liu, X., Analysis of leveling strategy for a plate mill, Adv. Mater. Res.. 2011, vol. 145, pp. 424–428; http://doi: 10.4028/www.scientific.net/AMR.145.424 .

Cui, L., Hu, X., and Liu, X., Research on mathematical model of leveling process for plate mill, Adv. Mater. Res.. 2011, vol. 148/149, pp. 368–371; http://doi: 10.4028/www.scientific.net/AMR.148-149.368 .

Doegea, E., Menza, R., and Huininka, S., Analysis of the levelling process based on analytic forming model, CIRP Ann., Manuf. Technol., vol. 51, issue 1, pp. 191–194, doi:10.1016/S0007-8506(07)61497-8.

Satonin, A.V., Gribkov, E.P., and Gavril’chenko, O.A., Simulation of the stress state and quality of metal in straightening on multiroller machines, Visnik Donbas’koi derzhavnoi mashinobudivnoi akademii (Proceedings of Donetsk Basin State Manufacturing Academy), Kramatorsk: DDMA. 2010, no. 1(18), pp. 268–273.

Timchenko, V.V., Egorov, A.B., Saplin, S.Yu., and Titarenko, O.A., Refined method of calculating the straightening parameters for multiroller machines, Udoskonalennya protsesiv i obladnaniya obrobki tiskom v metallurgii i mashinobuduvanni (Improving Pressure-Treatment Processes and Equipment in Metallurgy and Manufacturing), Kramatorsk: DDMA. 2005, pp. 495–499.

Satonin, A.V., Gavril’chenko, O.A., Titarenko, A.I., and Shestopalov, A.V., Influence of temperature and geometric characteristics on the forces in the hot straightening of relatively thick sheet, Obrabotka materialov davleniem (Pressure Treatment of Materials), Kramatorsk: DGMA. 2008, no. 1(19), pp. 115–119.

Fedorinov, V.A., Barabash, A.V., Gavril’chenko, E.Yu., and Gribkov, E.P., Mathematical model for the adjustment of the TLS 2850 sheet-straightening machine for hot and cold straightening at Asha metallurgical plant, Obrabotka materialov davleniem (Pressure Treatment of Materials), Kramatorsk: DGMA. 2014, no. 1(38), pp. 48–53.