Stoichiometry and structural studies of Fe(III) and Zn(II) solvent extraction using D2EHPA/TBP

Jha, 2001, Review of hydrometallurgical recovery of zinc from industrial wastes, Resour. Conserv. Recycl., 33, 1, 10.1016/S0921-3449(00)00095-1 Lum, 2014, Development of a process for the recovery of zinc sulphate from hot-dip galvanizing spent pickling liquor via two solvent extraction steps, Hydrometallurgy, 142, 108, 10.1016/j.hydromet.2013.11.016 Yan, 2014, A novel method to recover zinc and iron from zinc leaching residue, Miner. Eng., 55, 103, 10.1016/j.mineng.2013.09.015 Sarangi, 2007, Separation of iron (III), copper(II) and zinc(II) from a mixed sulphate/chloride solution using TBP, LIX 841 and Cyanex 923, Sep. Purif. Technol., 55, 44, 10.1016/j.seppur.2006.10.021 Sinha, 2014, Solvent extraction and separation of zinc and iron from spent pickle liquor, Hydrometallurgy, 147–148, 103, 10.1016/j.hydromet.2014.05.006 Lu, 2013, Solvent extraction of copper from chloride solution I: extraction isotherms, Hydrometallurgy, 137, 13, 10.1016/j.hydromet.2013.04.001 Pereira, 2007, Recovery of zinc sulphate from industrial effluents by liquid-liquid extraction using D2EHPA (di-2-ethylhexyl phosphoric acid), Sep. Purif. Technol., 53, 89, 10.1016/j.seppur.2006.06.013 El Dessouky, 2008, Solvent extraction separation of Zn(II), Fe(II), Fe(III) and Cd(II) using tributylphosphate and CYANEX 921 in kerosene from chloride medium, Chem. Eng. Process. Process Intensif., 47, 177, 10.1016/j.cep.2007.03.002 Reddy, 1996, Extraction of iron(III) at macro-level concentrations using TBP, MIBK and their mixtures, Hydrometallurgy, 43, 299, 10.1016/0304-386X(95)00117-Y Bartkowska, 2002, Extraction of Zinc (II), Iron (III) and Iron (II) With Binary Mixtures Containing Tributyl Phosphate and Di (2-Ethylhexyl) Phosphoric Acid or Cyanex 302, Chem. Technol., 36, 217 Vahidi, 2009, Recovery of zinc from an industrial zinc leach residue by solvent extraction using D2EHPA, Miner. Eng., 22, 204, 10.1016/j.mineng.2008.05.002 Hosseini, 2010, Investigating the synergistic effect of D2EHPA and Cyanex 302 on zinc and manganese separation, Sep. Sci. Technol., 45, 1158, 10.1080/01496391003727908 Chang, 2011, Efficiency, stoichiometry and structural studies of Cu (II) removal from aqueous solutions using di-2-ethylhexylphosphoric acid and tributylphosphate diluted in soybean oil, Chem. Eng. J., 166, 249, 10.1016/j.cej.2010.10.069 Bakert, 1962, An infrared and isopiestic investigation of the interaction between di(2-ethylhexyl)phosphoric acid and tri-n-octylphosphine oxide in octane, J. Inorg. Nucl. Chem., 24, 1277, 10.1016/0022-1902(62)80204-8 Darvishi, 2005, Synergistic effect of Cyanex 272 and Cyanex 302 on separation of cobalt and nickel by D2EHPA, Hydrometallurgy, 77, 227, 10.1016/j.hydromet.2005.02.002 Shen, 2007, Separation of glycyrrhizic acid and liquiritin from glycyrrhiza uralensis fisch extract by three-liquid-phase extraction systems, Sep. Purif. Technol., 53, 216, 10.1016/j.seppur.2006.07.003 Azizi, 2015, Synergistic extraction and separation of Fe(III) and Zn(II) using TBP and D2EHPA, 705 Sahu, 1997, Synergistic extraction of iron(III) at higher concentrations in D2EHPA-TBP mixed solvent systems, Metall. Mater. Trans. B, 28, 181, 10.1007/s11663-997-0083-6 Hirato, 1992, Improvement of the stripping characteristics of Fe(III) utilizing a mixture of di (2-ethylhexyl) phosphoric acid and tri-n-butyl phosphate, Hydrometallurgy, 28, 81, 10.1016/0304-386X(92)90066-9 Grzeszczyk, 2007, Extraction of zinc(II), iron(II) and iron(III) from chloride media with dibutylbutylphosphonate, Hydrometallurgy, 86, 72, 10.1016/j.hydromet.2006.11.005 Jiang, 2003, Extraction of inorganic acids with neutral phosphorus extractants based on a reverse micelle/microemulsion mechanism, Coll. Interface Sci., 268, 208, 10.1016/j.jcis.2003.08.045 Babakhani, 2014, Selective separation of nickel and cadmium from sulfate solutions of spent nickel-cadmium batteries using mixtures of D2EHPA and CYANEX 302, Power Sour., 247, 127, 10.1016/j.jpowsour.2013.08.063 Mansur, 2008, Selective extraction of zinc (II) over iron (II) from spent hydrochloric acid pickling effluents by liquid–liquid extraction, J. Hazard. Mater., 150, 669, 10.1016/j.jhazmat.2007.05.019 Batchu, 2014, Solvent extraction equilibrium and modeling studies of manganese from sulphate solutions by a mixture of cyanex 301 and TBP, Hydrometallurgy, 144–145, 1, 10.1016/j.hydromet.2014.01.009 Saniz-Diaz, 1996, New approach in the modeling of the extraction equilibrium of zinc with bis-(2-ethylhexyl) phosphoric acid, Hydrometallurgy, 42, 1, 10.1016/0304-386X(95)00075-R Haghshenas Fatmehsari, 2009, Interaction between TBP and D2EHPA during Zn, Cd, Mn, Cu, Co and Ni solvent extraction: a thermodynamic and empirical approach, Hydrometallurgy, 98, 143, 10.1016/j.hydromet.2009.04.010 Mishra, 2010, A comparative study on extraction of Fe(III) from chloride leach liquor using TBP, Cyanex 921 and Cyanex 923, Hydrometallurgy, 104, 298, 10.1016/j.hydromet.2010.07.003 Pavia, 1987 Jin, 2014, Solvent extraction of Fe3+ from the hydrochloric acid route phosphoric acid by D2EHPA in kerosene, J. Ind. Eng. Chem., 20, 3446, 10.1016/j.jiec.2013.12.033 Chen, 2015, Hydrometallurgical recovery of metal values from sulfuric acid leaching liquor of spent lithium-ion batteries, Waste Manage., 5 Mishra, 2011, Solvent extraction of Fe(III) from the chloride leach liquor of low grade iron ore tailings using Aliquat 336, Hydrometallurgy, 108, 93, 10.1016/j.hydromet.2011.03.003 Park, 2010, Recovery of molybdenum from spent catalyst leach solutions by solvent extraction with LIX 84-I, Sep. Purif. Technol., 74, 294, 10.1016/j.seppur.2010.06.018