Status of electromagnetic heating for enhanced heavy oil/bitumen recovery and future prospects: A review
Tóm tắt
Từ khóa
Tài liệu tham khảo
Meyer RF, Attansi ED, Freeman PA. Heavy oil and natural bitumen resources in geological basins of the world. U.S. Geological Survey Open-File Report 2007-1084; 2007. <http://pubs.usgs.gov/of/2007/1084/>.
Ritchey HW. Radiation heating. USA Patent Application, Serial No. 2,757,738, filed on 20 September, 1948; 1956.
Amba, 1964, Use of direct electrical current for increasing the flow rate of reservoir fluids during petroleum recovery, J Can Petrol Technol, 3, 8, 10.2118/64-01-02
Chilingar, 1968, Possible use of direct electrical current for augmenting reservoir energy during petroleum production, Compass Sigma Gamma Epsilon, 45, 272
Chilingar, 1997, Electrobioremediation of soils contaminated with hydrocarbons and metals: progress report, Energy Sour, 19, 129, 10.1080/00908319708908838
Sahni A, Kumar M, Knapp RB. Electromagnetic heating methods for heavy oil recovery. In: Paper SPE 62550 presented at the 2000 SPE/AAPG western regional meeting held in long beach, California, 19–23 June, 2000.
Hascakir, 2009, Microwave-assisted heavy oil production: an experimental approach, Energy Fuels, 23, 6033, 10.1021/ef9007517
Kovaleva, 2011, Effects of electrical and radio-frequency electromagnetic heating on the mass-transfer process during miscible injection for heavy-oil recovery, Energy Fuels, 25, 482, 10.1021/ef1009428
Alomair O, Alarouj M, Althenayyan A, Alsaleh A, Mohammad H, Altahoo Y, et al. Improving heavy oil recovery by unconventional thermal methods. In: Paper SPE 163311 presented at the SPE Kuwait international petroleum conference and exhibition held in Kuwait City, Kuwait, 10–12 December; 2012.
Greff, 2013, Use of nano-metal particles as catalyst under electromagnetic heating for in-situ heavy oil recovery, J Pet Sci Eng, 112, 258, 10.1016/j.petrol.2013.11.012
Workman PE. Method of recovering and increasing the production of oil. USA Patent Application, Serial No. 1,784,214, filed on 19 October, 1928; 1930.
Chakma A, Jha K. Heavy-oil recovery from thin pay zones by electromagnetic heating. In: Paper SPE 24817 presented at the SPE annual technical conference and exhibition, Washington (DC), 4–7 October; 1992.
Acar C. Enhancing petroleum recovery from heavy oil fields by microwave heating. Masters dissertation, June 2007, Middle East Technical University, Ankara, Turkey; 2007.
Carrizales M, Lake LW. Two-dimensional COMSOL simulation of heavy-oil recovery by electromagnetic heating. In: Proceeding of COMSOL conference, Boston; 2009.
Palmgren C, Walker I, Carlson M, Uwiera M, Torlak M. Reservoir design of a shallow LP-SAGD project for in situ extraction of Athabasca Bitumen. In: Paper WHOC11-520 presented at 2011 World Heavy Oil Congress, Edmonton, Alberta, Canada; 2011.
Vaca P, Pasalic D, Okoniewski M. The application of radiofrequency heating technology for heavy oil and oil sands production. Acceleware whitepaper: Version 1.0, June 2014; 2014.
Kovaleva, 2010, Effects of electrical and radio-frequency electromagnetic heating on the mass-transfer process during miscible injection for heavy-oil recovery, Energy Fuels, 25, 482, 10.1021/ef1009428
Kovaleva L, Davletbaev A, Minnigalimov R. Recoveries of heavy oil and bitumen techniques with the radiofrequency electromagnetic irradiation. In: Paper SPE 138086 presented at the SPE Russian oil and gas technical conference and exhibition held in Moscow, Russia, 26–28 October; 2010.
Davletbaev, 2008, Numerical simulation of injection of a solvent into a production well under electromagnetic action, Fluid Dyn, 43, 583, 10.1134/S0015462808040108
Taber, 1997, EOR screening criteria revisited – Part 1: Introduction to screening criteria and enhanced recovery field projects, SPE Reserv Eng, 12, 189, 10.2118/35385-PA
Koottungal, 2014, Worldwide EOR survey, Oil Gas J, 112, 79
Alikhlalov K, Dindoruk B. Conversion of cyclic steam injection to continuous steam injection. In: Paper SPE 146612 presented at the annual technical conference and exhibition, 30 October–2 November, Denver, Colorado, USA; 2011.
Alvarez, 2013, Current overview of cyclic steam injection process, J Petrol Sci Res, 2, 116
Orr B. ES-SAGD; past present and future. In: Paper SPE 129518-STU presented at the SPE annual technical conference and exhibition, 4–7 October, New Orleans, Louisiana; 2009.
Jimenez J. The field performance of SAGD projects in Canada. In: Paper IPTC 12860 presented at the international petroleum technology conference held in Kuala Lumpur, Malaysia, 3–5 December; 2008.
Okassa F, Godi A, Simoni MD, Matteo M, Misenta M. A non-conventional EOR technology using RF/MW heating coupled with a new patented well/reservoir interface. In: Paper SPE 134324 presented at the SPE annual technical conference and exhibition held in Florence, Italy, 22–23 September; 2010.
Bientinesi, 2013, A radiofrequency/microwave heating for thermal heavy oil recovery based on a novel tight-shell conceptual design, J Pet Sci Eng, 107, 18, 10.1016/j.petrol.2013.02.014
Gerlich, 2013, COMSOL multiphysics validation as simulation software for heat transfer calculation in buildings: building simulation software validation, Measurement, 46, 2003, 10.1016/j.measurement.2013.02.020
Salvi, 2011, COMSOL multiphysics model for continuous flow microwave heating of liquids, J Food Eng, 104, 422, 10.1016/j.jfoodeng.2011.01.005
Abdulrahman, 2014, Antenna array design for enhanced oil recovery under oil reservoir constraints with experimental validation, Energy, 66, 868, 10.1016/j.energy.2014.01.002
Abernethy, 1975, Production increase of heavy oils by electromagnetic heating, J Can Petrol Technol, 15, 91
Smythe WR. Static and dynamic electricity. 3rd ed., 1968. p. 431.
Davletbaev, 2014, Heavy oil production by electromagnetic heating in hydraulically fractured wells, Energy Fuels, 28, 5737, 10.1021/ef5014264
Davletbaev A, Kovaleva L, Babadagli T, Minnigalimov R. Heavy oil and bitumen recovery using radiofrequency electromagnetic irradiation and electrical heating: theoretical analysis and field scale observations. In: Paper SPE 136611-MS presented at the Canadian Unconventional Resources and International Petroleum Conference, 19–21 October, Calgary, Alberta, Canada; 2010.
Lui M, Zhao G. A performance comparison study of electromagnetic heating and SAGD process. In: SPE 165547 presented at the SPE heavy oil conference Canada held in Calgary, Alberta, Canada, June; 2013.
Yuan JY, Isaacs EE. Wet electrical heating process. In: International patent E21B 43/24. International Publication Number WE03/054351 A1; 2003.
Pizzaro, 1990, Electrical heating of oil reservoirs: numerical simulation and field test results, J Petrol Technol, 42, 1320, 10.2118/19685-PA
Vermeulen, 2000, In situ electromagnetic heating for hydrocarbon recovery and environmental remediation, J Can Petrol Technol, 39, 25, 10.2118/00-08-DAS
Koolman M, Huber N, Diehl D, Wacker B. Electromagnetic heating method to improve steam assisted gravity drainage. In: Paper SPE 1177481 presented at the SPE international thermal operations and heavy oil symposium, Alberta, Canada, 20–23 October; 2008.
Chhetri, 2008, A critical review of electromagnetic heating for enhanced oil recovery, Pet Sci Tech, 26, 1619, 10.1080/10916460701287607
Mutyala, 2010, Microwave applications to oil sands and petroleum: a review, Fuel Process Technol, 91, 127, 10.1016/j.fuproc.2009.09.009
Rehman, 2012, Conventional versus electrical oil recovery: a review, J Petrol Prod Technol, 2, 157, 10.1007/s13202-012-0034-x
Mukhametshina, 2013, Electromagnetic heating of heavy oil and bitumen: a review of experimental studies and field applications, J Petrol Eng, 2013, 10.1155/2013/476519
Hasanvand, 2014, A critical review of improved oil recovery by electromagnetic heating, Petrol Sci Technol, 32, 631, 10.1080/10916466.2011.592896
Haagensen AD. Oil well microwave tools. USA Patent Application, Serial no. 3170119, filed on May 11, 1960; 1965.
Freedman R, Montague DR. Electromagnetic propagation tool (Ept): comparison of log derived and in-situ oil saturations in shaly fresh water sands. In: Paper SPE 9266-MS presented at the SPE annual technical conference and exhibition, 21–24 September, Dallas, Texas; 1980.
Witterholt EJ, Kretzschmur JL. Mapping of a steam flood with MHz EM waves. In: Paper SEG-1984-0719 presented at 1984 SEG annual meeting, 2–6 December, Atlanta, Georgia; 1984.
Hiebert, 1986, Numerical simulation results for the electrical heating of athabasca oil-sand formations, SPE Reserv Eng, 1, 76, 10.2118/13013-PA
Fanchi JR. Feasibility of near-wellbore heating by electromagnetic irradiation. In: Paper SPE 20483-MS presented at SPE annual technical conference and exhibition, 23–26 September, New Orleans, Louisiana; 1990.
Baylor BA, Maggard JB, Wattenbarger RA. Improved calculation of oil production response to electrical resistance heating (ERH). In: Paper SPE-20482-MS presented at the SPE annual technical conference and exhibition, 23–26 September, New Orleans, Louisiana; 1990.
Wadadar SS, Islam MR. Numerical simulation of electromagnetic heating of Alaskan tar sands using horizontal wells. In: Paper PETSOC-91-35 presented at the annual technical meeting, 21–24 April, Banff, Canada; 1991.
McGee BCW, Vermeulen FE. Electrical heating with horizontal wells, the heat transfer problem. In: Paper SPE 37117 presented at the SPE international conference on horizontal well technology held in Calgary, Canada, 18–20 November; 1996.
Soliman, 1997, Approximate solutions for flow of oil heated using microwaves, J Pet Sci Eng, 18, 93, 10.1016/S0920-4105(97)00007-7
Wacker B, Karmeileopardus D, Trautmann B, Helget A, Torlak M. Electromagnetic heating for in-situ production of heavy oil and bitumen reservoirs. In: Paper CSUG/SPE 148932 presented at the Canadian unconventional resources conference held in Calgary, Alberta, Canada, 15–17 November; 2011.
Ovalles C, Fonseca A, Lara A, Alvarado V, Urresheaga K, Ranson A, et al. Opportunities of downhole dielectric heating in venezuela: three case studies involving medium, heavy and extra-heavy crude oil reservoirs. In: Paper 78980-MS presented at the SPE international thermal operations and heavy oil symposium and international horizontal well technology conference, Calgary, Alberta, Canada, 4–7 November; 2002.
Rangel-German ER, Camacho-Romero S, Neri-Flores U, Theokritoff WA. Thermal Simulation and economic evaluation of heavy-oil projects. In: Paper SPE 104046 presented at the first international oil conference and exhibition in Mexico held in Cancun, Mexico, 31 August–2 September; 2006.
Gasbarri S, Diaz A, Guzman M. Evaluation of electrical heating on recovery factors in extra heavy oil reservoirs. In: Paper SPE 149779 presented at the SPE heavy oil conference and exhibition held in Kuwait City, Kuwait, 12–14 December; 2011.
Carrizales MA, Lake LW, Johns RT. Production improvement of heavy-oil recovery by using electromagnetic heating. In: Paper SPE 11572 presented at the SPE annual technical conference and exhibition (ATCE 2008), Denver, Colorado, USA, 21–24 September; 2008.
Wang J, Bryan J, Kantzas A. Comparative investigation of thermal processes for marginal bitumen resources. In: Paper IPTC 12750 presented at the international petroleum technology conference held in Kuala Lumpur, Malaysia, 3–5 December; 2008.
Bogdanov I, Torres JA, Kamp A, Corre B. Comparative analysis of electromagnetic methods for heavy oil recovery. In: Paper SPE 150550 presented at the SPE heavy oil conference and exhibition held in Kuwait City, Kuwait, 12–14 December; 2011.
Das S. Electro-magnetic heating in viscous oil reservoir. In: Paper SPE/PS/CHOA 117693 presented at the SPE international thermal operations and heavy oil symposium, Alberta, Canada, 20–23 October; 2008.
Li-ying, 2008, Temperature analysis of electric heating hollow sucker rods and its application, Petrol Explor Develop, 35, 362, 10.1016/S1876-3804(08)60084-1
McGee BCW, Donaldson RD. Heat transfer fundamentals for electro-thermal heating of oil reservoirs. In: Paper 2009-204, presented at the Canadian international petroleum conference, Calgary, Alberta, Canada, 16–18 June; 2009.
Carrizales M, Lake LW, Johns RT. Multiphase fluid flow simulation of heavy oil recovery by electromagnetic heating. In: Paper SPE 129730 presented at the SPE improved oil recovery symposium held in Tulsa, Oklahoma, USA, 24–28 April; 2010.
Davletbaev, 2011, Mathematical modeling and field application of heavy oil recovery by radio-frequency electromagnetic stimulation, J Petrol Sci Eng, 78, 646, 10.1016/j.petrol.2011.07.006
Bogdanov I, Torres JA, Kamp A, Corre B. Numerical simulation of electromagnetic driven heavy oil recovery. In: Paper SPE 154140 presented at the SPE improved oil recovery symposium held in Tulsa, Oklahoma, USA, 14–18 April; 2012.
Mustafina D, Koch A, Danov V, Sotskiy S. Mechanism of heavy oil recovery driven by electromagnetic inductive heating. In: Paper SPE 165507 presented at the SPE heavy oil conference Canada held in Calgary, Alberta, Canada, June 11–13; 2013.
Jha AK, Joshi N, Singh A. Applicability and assessment of micro-wave assisted gravity drainage (MWAGD) applications in Mehsena heavy oil field, India. In: Paper SPE 149592 presented at the SPE heavy oil conference and exhibition held in Kuwait City, Kuwait, 12–14 December; 2011.
Liguo Z, Di Y, Hailin Y, Yongato S, Guangshun W, Jun Z. Feasibility study on producing heavy oil by gas and electrical heating assisted gravity drainage. In: Paper OTC 21649 presented at the offshore technology held in Houston, Texas, USA, 2–5 May; 2011.
Parsons, 1975, Microwave attenuation – a new tool for monitoring saturations in laboratory flooding experiments, Soc Petrol Eng J, 15, 302, 10.2118/4985-PA
Islam, 1995, A new technique for recovering heavy oil and tar sands, Scientia Iranica, 2, 15
Kasevich RS, Price SL, Faust DL, Fontaine MF. Pilot testing of a radiofrequency heating system for enhanced oil recovery from diatomaceous earth. In: Paper SPE 28619 presented at the SPE 69th annual technical conference and exhibition held in New Orleans, LA, U.S.A., 25–28 September; 1994.
Gunal, 2000, Alteration of asphaltic crude rheology with electromagnetic and ultrasonic irradiation, J Petrol Sci Eng, 26, 263, 10.1016/S0920-4105(00)00040-1
Jackson C. Upgrading a heavy oil using variable frequency microwave energy. In: Paper SPE/petroleum society of CIM/CHOA 78982 presented at SPE international thermal operations and heavy oil symposium and international horizontal well technology conference, Calgary, Alberta, Canada, 4–7 November; 2002.
Vega C, Delgado M. Treatment of waste-water/oil emulsions using microwave radiation. In: Paper SPE-74167-MS presented at the SPE international conference on health, safety and environment in oil and gas exploration and production, Kuala Lumpur, Malaysia, 20–22 March; 2002.
Li G, Meng Y, Tang H. Clean up water blocking in gas reservoirs by microwave heating: laboratory studies. In: Paper SPE 101072 presented at the SPE international oil & gas conference and exhibition in China held in Beijing, China, 5–7 December; 2006.
Robinson J, Kingman S, Snape C, Bradley M, Bradshaw S, Thomas D, et al. Microwave treatment of oil-contaminated drill cuttings at pilot scale. In: Paper SPE 111637 presented at the SPE international conference on health, safety, and environment in oil and gas exploration and production held in Nice, France, 15–17 April; 2008.
Robinson J, Kingman S, Snape CE, Antonio C, Pereira I, Page PW, et al. Microwave treatment of oil contaminated drill cuttuings-towards a commercial scale system. In: Paper SPE 127064 presented at the SPE international conference on health, safety, and environment in oil and gas exploration and production held Rio de Janeiro, Brazil, 12–14 April; 2010.
Bjorndalen, 2003, Numerical modelling of petroleum fluids under microwave irradiation for improved horizontal well performance, Int Commun Heat Mass Transfer, 30, 765, 10.1016/S0735-1933(03)00124-6
Bjorndalen N, Mustafiz S, Islam MR. A zero-waste oil and gas production scheme. In: Proceedings of the 8th mediterranean petroleum conference and exhibition, Tripoli, Libya, 20–22 January; 2004.
Bjorndalen N, Mustafiz S, Islam MR. The effect of irradiation on immiscible fluids for increased oil production with horizontal wells. In: Proceedings of IMECE 2005 ASME international mechanical engineering congress and exposition, Orlando, FL, IMECE2005-81752, 5–11 November; 2005.
Hascakir B, Babadagli T, Akin S. Experimental and numerical modeling of heavy-oil recovery by electrical heating. In: Paper SPE/PS/CHOA 117669 presented at the SPE international thermal operations and heavy oil symposium, Alberta, Canada, 20–23 October; 2008.
Hascakir, 2008, Experimental and numerical simulation of oil recovery from oil shales by electrical heating, Energy Fuels, 22, 3976, 10.1021/ef800389v
Sayakhov FL, Bulgakov R, Dyblenko V, Deshura B, Bykov M. About HF heating of bitumen reservoirs, vol. 1. Petroleum Engineering; 1980. p. 5–8. [Russian].
Sayakhov FL, Habibullin I, Yagudin M, Fatyhov M. Technique and technology of thermal well stimulation on the basis electro-thermo-chemical and electromagnetic effects, vol. 2. University Investigations: Oil and Gas; 1992. p. 33–42. [Russian].
Sayakhov FL, Kovaleva LA, Fatikhov MA, Khalikov GA. Method of thermal effect on oil-bearing formation. SU Patent Application, Serial No. 1723314; 1992.
Bridges J, Taflove A, Snow R. Method for in situ heat processing of hydrocarbonaceous formation. USA Patent Application, Serial No. 4,140,180 filed on 20 February, 1979; 1979.
Spencer HL. Electromagnetic Oil Recovery Ltd., Calgary, Canada; 1987.
Davidson, 1995, Electromagnetic stimulation of Lloydminster heavy oil reservoirs: field test results, J Can Petrol Technol, 34, 15
Sresty, 1986, Recovery of bitumen from tar sand deposits with the radiofrequency process, Soc Petrol Eng J, 1, 85
Bottazzi F, Repetto C, Tita E, Maugeri G. Downhole electrical heating for heavy oil enhanced recovery: a successful application in offshore Congo. In: Paper IPTC 16858 presented at the international petroleum technology conference held in Beijing, China, 26–28 March; 2013.
Peraser V, Patil SL, Khataniar S, Dandekar AY, Sonwalkar SV. Evaluation of electromagnetic heating for heavy oil recovery from Alaskan reservoirs. In: Paper SPE 154123 presented at the SPE western regional meeting held in Bakersfield, California, USA, 19–23 March; 2012.
Greff J, Babadagli J. Catalytic effects of nano-size metal ions in breaking asphaltene molecules during thermal recovery of heavy oil. In: Paper SPE 146604 presented at the SPE annual technical conference and exhibition held in Denver, Colorado, USA, 30 October–2 November; 2011.
Hamedi Shokrlu YH, Babadagli T. Effects of nano-sized metals on viscosity reduction of heavy oil/bitumen during thermal applications. In: Paper SPE-137540-MS presented Canadian unconventional resources and international petroleum conference, Calgary, Alberta, Canada, 19–21 October; 2010.
Hamedi Shokrlu YH, Babadagli T. Transportation and interaction of nano and micro size metal particles injected to improve thermal recovery of heavy-oil. In: Paper SPE-146661-MS presented at SPE annual technical conference and exhibition, Denver, Colorado, USA, 30 October–2 November; 2011.
Hascakir B, Akin S. Effect of metallic additives on upgrading heavy oil with microwave heating. In: Paper 2006-549 presented at the 1st world heavy oil conference, Beijing, China; 2006.
Davidson A, Huh C, Bryant SL. Focused magnetic heating utilizing super paramagnetic nanoparticles for improved oil production applications. In: Paper SPE-157046-MS presented at the SPE international oilfield nanotechnology conference and exhibition, Noordwijk, The Netherlands, 12–14 June; 2012.
Neto, 2014, The oil shale transformation in the presence of an acidic BEA 2 zeolite under microwave irradiation, Energy Fuels, 28, 2365, 10.1021/ef4023898
Chao, 2012, Upgrading and visbreaking of super-heavy oil by catalytic aquathermolysis with aromatic sulfonic copper, Fuel Process Technol, 104, 174, 10.1016/j.fuproc.2012.05.010
Maity, 2010, Catalytic aquathermolysis used for viscosity reduction of heavy crude oils: a review, Energy Fuels, 24, 2809, 10.1021/ef100230k
Olvera, 2014, Use of unsupported, mechanically alloyed NiWMoC nanocatalyst to reduce the viscosity of aquathermolysis reaction of heavy oil, Catal Commun, 43, 131, 10.1016/j.catcom.2013.09.027
Hart, 2014, Downhole heavy crude oil upgrading using CAPRI: effect of steam upon upgrading and coke formation, Energy Fuels, 28, 1811, 10.1021/ef402300k
Chuan, 2010, Mechanism for reducing the viscosity of extra-heavy oil by aquathermolysis with an amphiphilic catalyst, J Fuel Chem Tech, 38, 684, 10.1016/S1872-5813(11)60004-2
Hamedi Shokrlu, 2013, Enhancement of the efficiency of in situ combustion technique for heavy-oil recovery by application of nickel ions, Fuel, 105, 397, 10.1016/j.fuel.2012.07.018
Hamedi Shokrlu, 2014, Viscosity reduction of heavy oil/bitumen using micro and nano metal particles during aqueous and non-aqueous thermal applications, J Petrol Sci Eng, 119, 210, 10.1016/j.petrol.2014.05.012
Khan, 2007, Community-based energy model: a novel approach to developing sustainable energy, Energy Sour, Part B, 2, 353, 10.1080/15567240600629534
Khan, 2011, A novel approach to comprehensive economic evaluations: case study of an inherently sustainable technology using renewable energy sources, Energy Sour, Part B, 6, 145, 10.1080/15567240801993325
McGee, 2007, The mechanisms of electrical heating for the recovery of bitumen from oil sands, J Can Petrol Technol, 46, 28, 10.2118/07-01-03
Martinez AB. The effects of microwaves on the trees and other plants. Valladolid, Spain. <www.stopumts.nl/pdf/onderzoek_bomen_planten.pdf>; 2003 [accessed 17.4.2006].
Kakita, 1999, Effects of microwave irradiation on bacteria attached to the hospital white coats, Int J Occup Med Environ Health, 12, 123
Michaelson, 1971, Biological effects of microwave exposure-An overview, J Microwave Power, 6, 259, 10.1080/00222739.1971.11688805
Ingram, 1986, Is RF energy hazardous to your health?, CQ Radio Amateur J, 42, 102