Static, dynamic and fatigue behaviors of dental implant using finite element method

Schroeder, 1996 Branemark, 1985 Adell, 1990, Long-term follow-up study of osseointegrated implants in the treatment of totally edentulous jaws, Int J Oral Maxillofac Implants, 5, 347 Adell, 1981, A 15-year study of osseointegrated implants in the treatment of the edentulous jaw, Int J Oral Surg, 6, 387, 10.1016/S0300-9785(81)80077-4 Geng, 2001, Application of finite element analysis in implant dentistry: a review of the literature, J Prosthet Dent, 85, 585, 10.1067/mpr.2001.115251 Pilliar, 1991, Dental implant design—effect on bone remodeling, J Biomed Mater Res, 25, 467, 10.1002/jbm.820250405 Vaillancourt, 1996, Factors affecting crestal bone loss with dental implants partially covered with a porous coating: a finite element analysis, Int J Oral Maxillofac Implants, 11, 351 Graf, 1977, Rationale for clinical application of different occlusal philosophies, Oral Sci Rev, 10, 1 Glantz, 1993, On clinical loading of osseointegrated implants. A methodological and clinical study, Clin Oral Implants Res, 4, 99, 10.1034/j.1600-0501.1993.040206.x Van Oosterwyck, 1998, The influence of bone mechanical properties and implant fixation upon bone loading around oral implants, Clin Oral Implants Res, 9, 407, 10.1034/j.1600-0501.1996.090606.x Sato, 1999, The effectiveness of element downsizing on a three-dimensional finite element model of bone trabeculae in implant biomechanics, J Oral Rehabil, 26, 288, 10.1046/j.1365-2842.1999.00390.x Sahin, 2002, The influence of functional forces on the biomechanics of implant-supported prostheses—a review, J Dent, 20, 271, 10.1016/S0300-5712(02)00065-9 Lekholm, 1985, Patient selection and preparation, 199 Holmes, 1997, Influence of bone quality on stress distribution for endosseous implants, J Oral Implantol, 23, 104 Ichikawa, 1997, Influence of bone quality on the stress distribution. An in vitro experiment, Clin Oral Implants Res, 8, 18, 10.1111/j.1600-0501.1997.tb00003.x Matsushita, 1990, Two dimensional FEM analysis of hydroxyapatite implants: diameter, effects on stress distribution, J Oral Implantol, 16, 6 Williams, 1990, Finite element analysis of fixed prostheses attached to osseointegrated implants, Quintessence Int, 21, 563 Cibirka, 1992, Determining the force absorption quotient for restorative materials used in the implant occlusal surfaces, J Prosthet Dent, 67, 361, 10.1016/0022-3913(92)90247-8 O’Brien, 1997 Alkan, 2004, Influence of occlusal forces on stress distribution in preloaded dental implant screws, J Prosthet Dent, 91, 319, 10.1016/j.prosdent.2004.01.016 Binon, 1996, The effect of eliminating implant/abutment rotational misfit on screw joint stability, Int J Prosthodont, 9, 511 Wiskott, 1995, Stress fatigue: basic principles and prosthodontic implications, Int J Prosthodont, 8, 105 Plant, 1974, The heat evolved and temperatures attained during setting of restorative materials, Brit Dent J, 137, 233, 10.1038/sj.bdj.4803293 Spierings, 1987, Verification of theoretical modeling of heat transmission in teeth by in vivo experiments, J Dent Res, 66, 1336, 10.1177/00220345870660080901 Toparlı, 2000, An investigation of temperature and stress distribution on a restored maxillary second premolar tooth using three-dimensional finite element method, J Oral Rehabil, 27, 1077, 10.1046/j.1365-2842.2000.00633.x Toparlı, 2003, Temperature and thermal stress analysis of a crowned maxillary second premolar tooth using three-dimensional finite element method, J Oral Rehabil, 30, 99, 10.1046/j.1365-2842.2003.00971.x Bathe, 1996 Meijer, 1996, Loading conditions of endosseous implants in an edentulous human mandible: a three-dimensional, finite-element study, J Oral Rehabil, 23, 757, 10.1046/j.1365-2842.1996.d01-185.x Lai, 1998, Influence of percentage of osseointegration on stress distribution around dental implants, Chin J Dent Res, 1, 7 Akpinar, 1996, A comparison of stress and strain distribution characteristics of two different rigid implant designs for distal-extension fixed prostheses, Quintessence Int, 27, 11 Holmgren, 1998, Evaluating parameters of osseointegrated dental implants using finite element analysis—a two dimensional comparative study examining the effects of implant diameter, implant shape, and load direction, J Oral Implantol, 24, 80, 10.1563/1548-1336(1998)024<0080:EPOODI>2.3.CO;2 İplikcioğlu, 2002, Comparative evaluation of the effect of diameter, length and number of implants supporting three-unit fixed partial prostheses on stress distribution in the bone, J Dent, 30, 41, 10.1016/S0300-5712(01)00057-4 Lang, 2003, Finite element analysis to determine implant preload, J Prosthet Dent, 90, 539, 10.1016/j.prosdent.2003.09.012 Holmgren, 1998, Evaluating parameters of osseointegrated dental implants using finite element analysis—a two-dimensional comparative study examining the effects of implant diameter, implant shape, and load direction, J Oral Implantol, 24, 80, 10.1563/1548-1336(1998)024<0080:EPOODI>2.3.CO;2 Cochran, 2000, The scientific basis for and clinical experiences with Straumann implants including the ITI dental implant system: a consensus report, Clin Oral Implants Res, 11, 33, 10.1034/j.1600-0501.2000.011S1033.x Ismail, 1987, Comparison of two-dimensional and three-dimensional finite element analysis of a blade implant, J Oral Implantol, 4, 25 Rieger, 1988, Finite element stress analysis of root-form implants, J Oral Implantol, 14, 472 Ashman, 1987, The elastic properties of a human mandible, Adv Dent Res, 1, 64, 10.1177/08959374870010011401 Eskitascioglu, 2004, The influence of occlusal loading location on stresses transferred to implant-supported prostheses and supporting bone: a three-dimensional finite element study, J Prosthet Dent, 91, 144, 10.1016/j.prosdent.2003.10.018 Yokoyama, 2004, The influence of implant location and length on stress distribution for three-unit implant-supported posterior cantilever fixed partial dentures, J Prosthet Dent, 91, 234, 10.1016/j.prosdent.2003.12.017 Zhang, 1998, The study of effects of changes of the elastic modulus of the materials substitute to human hard tissues on the mechanical state in the implant–bone interface by three-dimensional anisotropic finite element analysis, West China J Stomatol, 16, 274 Misch, 1998 Misch, 1990, Density of bone: effect on treatment plans, surgical approach, healing, and progressive bone loading, Int J Oral Implantol, 6, 23 Lekholm, 1985, Tissue-integrated prostheses, 199 Sertgoz, 1997, Finite element analysis study of the effect of superstructure material on stress distribution in an implant-supported fixed prosthesis, Int J Prosthodont, 10, 19 De Tolla, 2000, The role of the finite element model in dental implants, J Oral Implantol, 26, 77, 10.1563/1548-1336(2000)026<0077:TROTFE>2.3.CO;2 Rieger, 1990, Finite element analysis of six endosseous implants, J Prosthet Dent, 63, 667