State of the art: Asphalt for airport pavement surfacing
Tóm tắt
Từ khóa
Tài liệu tham khảo
White, 1985, Marshall procedures for design and quality control of asphalt mixture’, Asphalt Pavement Technol., 54, 265
B. Rodway, Flexible aircraft pavement surfacing – Australian practice, 8th International Conference on Maintenance and Rehabilitation of Pavements, Singapore, 27–29 July, 2016.
P. Zuzelo, The benefits of runway grooving, Airfield Engineering and Maintenance Summit, Furama Riverfront, Singapore, 25–28 March, 2014.
White, 2016, Limitations and potential improvement of the aircraft pavement strength rating system, Int. J. Pavement Eng.
G. White, Changes in Australian paving-grade bitumen: are they real and what should Australia do about it?, 27th ARRB Conference, Melbourne, Victoria, Australia, 16–18 November, 2016.
Rushing, 2012, Asphalt pavement analyser used to assess rutting susceptibility of hot-mix asphalt designed for high tire pressure aircraft, Transport. Res. Rec. J. Transport. Res. Board, 2296, 97, 10.3141/2296-10
E. Horak, S. Emery, I. Mihaljevic, Balancing asphalt rut resistance with durability and safety requirements on runway rehabilitations, Airfield Pavements Seminar, XXIVth World Road Congress, Mexico City, Mexico, 28–29 September, 2011.
P. Molenaar, F. Hugo, J. Buekes, G. Catin, Rehabilitation of RWY 03L–21R at Johannesburg international airport: selection of asphalt mixes using MMLS3 testing, in: 8th Conference on Asphalt Pavement for Southern Africa, Sun City, South Africa, 12–16 September 2004.
C.L. Monismith, B.A. Vallerga, J.T. Harvey, F. Long, A. Jew, Asphalt mix studies – San Francisco International Airport, 26th Air Transportation Conference, San Francisco, California, USA, 19-21 June 2000, 113-124.
B. Rodway, Asphalt deformation due to high tyre pressure, FAA Airport Pavement Working Group Annual Meeting, Atlantic City, New Jersey, USA, 21–23 July, 2009.
White, 2016, Asphalt tenderness in an Australian runway overlay, Transport. Geotechn., 6, 66, 10.1016/j.trgeo.2015.08.001
Airfield use of Asphalt, European Asphalt Pavement Association, May. http://www.eapa.org/usr_img/position_paper/airfield.pdf. (accessed 25.11.13).
White, 2015, State of the art: interface shear resistance of asphalt surface layers, Int. J. Pavement Eng., 1126270
Aerodrome Design and Operations. Annex 14, Volume 1, to the Conventions on International Civil Aviation, International Civil Aviation Organization, Montreal, Canada, February 2013.
S. Emery, Asphalt on Australian airports, Proceedings AAPA Pavements Industry Conference, Surfers Paradise, Queensland, Australia, 18–21 September 2005.
G. White, K. Embleton, Next Generation Binder for Airport Asphalt, 16th AAPA International Flexible Pavement Conference, Gold Coast, Queensland, Australia, 13–16 September 2015.
J. Gagnon, Runway grooving – the past, present and future, 8th International Conference on Maintenance and Rehabilitation of Pavements, Singapore, 27–29 July 2016.
C. Fabre, J. Balay, P. Lerat, A. Mazars, Full-scale aircraft tire pressure test, in: Proceedings Eight International Conference on the Bearing Capacity of Roads, Railways and Airfields, Urbana-Champaign, Illinois, USA, 29 June – 2 July 2009, pp. 1405–1413.
M.J. Roginski, Effects of aircraft tire pressures on flexible pavements, Advanced Characterisation of Pavement and Soil Engineering Materials, Athens, Greece, 20-22 June 2007, 1473-1481.
Airbus Aircraft Characteristics. http://www.airbus.com/support/ maintenance-engineering/ technical-data/aircraft-characteristics/, 2014 (accessed 27.01.14).
Boeing Commercial Airport Planning Manuals. http://www.boeing.com/boeing/commercial/ airports/plan_manuals.page. (accessed 27.01.14).
White, 2016, Shear stresses in an asphalt surface under various aircraft braking conditions, Int. J. Pavement Res. Technol., 9, 89, 10.1016/j.ijprt.2016.02.002
Rushing, 2014, Selecting a rutting performance test for airport asphalt mixture design, Road Mater. Pavement Des., 15, 172, 10.1080/14680629.2014.926626
E.J. Dickinson, Pavement Temperature Regimes in Australia: their effect on the Performance of Bituminous Constructions and their Relationship with Average Climate Indicators, Special Report 23, Australian Road Research Board, August 1981.
Lee, 2000, Laboratory performance evaluation of modified asphalt mixtures for Inchon airport pavements, Int. J. Pavement Eng., 1, 151, 10.1080/10298430008901703
G. White, Cyclic shear deformation of asphalt at Melbourne airport, FAA World Wide Airport Technology Transfer, Galloway, New Jersey, USA, 5–7 August 2014.
C.J. Bognacki, A. Frisvold, T. Bennert, Investigation into asphalt pavement slippage failures on Runway 04R–22L Newark International Airport, Proceedings 2007 FAA Worldwide Airport Technology Transfer Conference, Galloway, New Jersey, USA, 16–18 April 2007.
F. Mooren, M. Stet, P. Hopman, Tire induced surface cracking due to extreme wheel loads, FAA Worldwide Airport Technology Transfer Conference, Galloway, New Jersey, USA, 5–7 August 2014.
Wang, 2016, Investigation of shear failure in airport asphalt pavements under aircraft ground manoeuvring, Road Mater. Pavement Des.
B.A. Vallerga, A. Jew, W.A. Nokes, Case study of an innovative high stability asphalt mix for heavy aircraft wheel loads, 26th Air Transportation Conference, San Francisco, California, USA, 19-21 June 2000, 334–345.
Collop, 2004, Report on the prediction of surface-initiated longitudinal wheel path cracking in asphalt pavements, Road Mater. Pavement Des., 5, 409
G. White, Potential causes of top-down cracking of Australian runway surfaces, 27th ARRB Conference, Melbourne, Victoria, Australia, 16–18 November 2016.
G. White, B. Rodway, Distress and Maintenance of Grooved Runway Surfaces, Airfield Engineering and Maintenance Summit, Equip Global, Furama Riverfront, Singapore, 25–28 March 2014.
S. Emery, Bituminous surfacings for pavement on Australian airports, Proceedings Australian Airports Association Convention, Hobart, Tasmania, Australia, 14–17 November 2005.
Airey, 2002, State of the art report on moisture sensitivity test methods for bituminous materials, Road Mater. Pavement Des., 3, 355, 10.1080/14680629.2002.9689930
Kandhal, 1994, Field and laboratory investigation of stripping in asphalt pavements: state of the art report, Transport. Res. Rec. J. Transport. Res. Board, 1454, 35
2007, Pavement Interactive, Pavement Management: Stripping, 16 August 2007
D.N. Little, J.A. Epps, The Benefits of Hydrated Lime in Hot Mix Asphalt, National Lime Association, 2001.
Xiao, 2010, Influence of antistripping additives on moisture susceptibility of warm mix asphalt mixtures, J. Mater. Civil Eng., 22, 1047, 10.1061/(ASCE)MT.1943-5533.0000111
White, 2016, Challenges for Australian flexible airport pavements, Aust. Geomech., 51, 39
Gorkem, 2009, Predicting stripping and moisture induced damage of asphalt concrete prepared with polymer modified bitumen and hydrated lime, Constr. Build. Mater., 23, 2227, 10.1016/j.conbuildmat.2008.12.001
G. White, M. Thompson, Australian airport asphalt surface treatments, in: 6th Eurasphalt & Eurobitume Congress, Prague, Czech Republic, 1–3 June 2016.
Airey, 2003, State of the art report on ageing test methods for bituminous pavement materials, Int. J. Pavement Eng., 4, 165, 10.1080/1029843042000198568
D.K. Paul, O. Sirin, E. Kassem, Laboratory investigation of asphalt mixture aging, in: 6th Eurasphalt & Eurobitume Congress, Prague, Czech Republic, 1–3 June 2016.
Christensen, 1992, Interpretation of dynamic mechanical test data for paving grade asphalt cements, J. Assoc. Asphalt Pavement Technol., 61, 67
King, 2013, Newark airport runway: a forensic study revisited, Transport. Res. Rec. J. Transport. Res. Board, 2372, 9, 10.3141/2372-02
Y. Hachiya, O. Takahashi, H. Ooki, M. Kanno, Applicability of concept of perpetual pavement to airport pavements, in: 8th International Conference on Maintenance and Rehabilitation of Pavements, Singapore, 27–29 July 2016.
Sousa, 1994
White, 2016, Developing a framework for diagnosis of shear distress in asphalt surfaces, Int. J. Pavement Eng.
Park, 2015, Primary causes of cracking in asphalt pavement in North Carolina: field study, Int. J. Pavement Eng., 16, 684, 10.1080/10298436.2014.943220
S. Emery, A. Norheim, I. Mihaljevic, Slippery asphalt runways after rejuvenation, Airfield Pavements Seminar: XXIVth World Road Congress, Mexico City, Mexico, 28–29 September 2011.
T.J. Yager, Runway Friction Assessment and Maintenance for Airports, Airfield Engineering and Maintenance Summit, Equip Global, Furama Riverfront, Singapore, 25–28 March 2014.
Curtis, 1990
Zelelew, 2012, Interpreting asphalt concrete creep behavior through non-Newtonian mastic rheology, Road Mater. Pavement Des., 13, 266, 10.1080/14680629.2012.670552
Pérez-Jiménez, 2008, Effect of the nature and filler content on the behavior of the bituminous mastics, Road Mater. Pavement Des., 9, 417, 10.1080/14680629.2008.9690177
B. Delaporte, H. Di Benedetto, P. Chaverot, G. Gauthier, Filler and binder influence on the linear viscoelastic behavior of mastics, Proceedings Advanced Characterisation of Pavement and Soil Engineering Materials, Athens, Greece, 20–22 June 2007, Taylor and Francis, 3–13.
Elnasri, 2013, Experimental investigation of bitumen mastics under shear creep and creep-recovery testing, Proceedings T&DI Airfield and Highway Pavement Speciality Conference, Los Angeles, California, USA, 9-12 June, 921
Tashman, 2005, A microstructure-based viscoplastic model for asphalt concrete, Int. J. Plast., 21, 1659, 10.1016/j.ijplas.2004.11.008
White, 2015, Shear creep response of an airport asphalt mastic, Int. J. Pavement Eng.
Hassan, 2012, Nondestructive characterisation of the effect of asphalt mixture compaction on aggregate orientation and segregation using x-ray computed tomography, Int. J. Pavement Res. Technol., 5, 84
Chen, 2005, Quantification of movement of flat and elongated particles in hot mix asphalt subject to wheel load test, Mater. Struct., 38, 395, 10.1617/14151
M.E. Labib, A.W. Hefer, D.N. Little, Surface-chemistry at the bitumen-aggregate interface, Advanced Characterisation of Pavement and Soil Engineering Materials, Athens, Greece, 20-22 June 2007, 1589–1599.
Bessa, 2012, Evaluation of different digital image processing software for aggregates and hot mix asphalt characterizations, Constr. Build. Mater., 37, 370, 10.1016/j.conbuildmat.2012.07.051
Holtz, 1981
Motamed, 2011, Influence of test geometry, temperature, stress level and loading duration on binder properties measured using DSR, J. Mater. Civ. Eng., 23, 1422, 10.1061/(ASCE)MT.1943-5533.0000321
Kutay, 2010, Three-dimensional image processing methods to identify and characterise aggregates in compacted asphalt mixtures, Int. J. Pavement Eng., 11, 511, 10.1080/10298431003749725
Masad, 1999, Internal structure characterisation of asphalt concrete using image analysis, J. Comput. Civil Eng., 13, 88, 10.1061/(ASCE)0887-3801(1999)13:2(88)
F.A. Farcas, Evaluation of asphalt field cores with simple performance tester and X-ray computer tomography, Licentiate Thesis submitted to the Royal Institute of Technology, Stockholm, Sweden, 2012.
Masad, 2000, Unified imaging approach for measuring aggregate angularity and texture, Computer-Aided Civil Infrastruct. Eng., 15, 273, 10.1111/0885-9507.00191
Tashman, 2007, Microstructure characterization for modeling HMA behaviour using imaging technology, Road Mater. Pavement Des., 8, 207, 10.1080/14680629.2007.9690073
Chen, 2005, Influence of coarse aggregate shape on the strength of asphalt concrete mixtures, J. Eastern Asia Soc. Transport. Studies, 6, 1062
Coenen, 2012, Aggregate structure characterisation of asphalt mixtures using two-dimensional image analysis, Road Mater. Pavement Des., 13, 433, 10.1080/14680629.2012.711923
Masad, 1999, Quantifying laboratory compaction effects on the internal structure of asphalt concrete, Transport Res. Rec. J. Transport. Res. Board, 1691, 179, 10.3141/1681-21
Masad, 1998, Aggregate orientation and segregation in asphalt concrete, application of Geotechnical Principles in Pavement Engineering, Geotechn. Spec. Pub., 85, 69
White, 2015, The effect of aircraft traffic on the structure and response of asphalt, Transport. Geotechn., 2, 56, 10.1016/j.trgeo.2014.10.001
P.S. Kandhal, J.B. Motter, M.A Khatri, Evaluation of Particle Shape and Texture: Manufactured versus Natural Sands, NCAT Report 91–03, National Centre for Asphalt Technology, Auburn, Alabama, USA, January 1991.
Kandhal, 1992
Lesueur, 2013, The mechanics of hydrated lime modification of asphalt mixtures: a state of the art review, Road Mater. Pavement Des., 14, 1, 10.1080/14680629.2012.743669
Wang, 2011, Effect of mineral filler characteristics on asphalt mastic and mixture rutting potential, Transport Res. Rec. J. Transport. Res. Board, 2208, 33, 10.3141/2208-05
Liao, 2013, Mechanical properties of filler-asphalt mastics, Int. J. Pavement Res. Technol., 6, 576
Bianchetto, 1998, Effect of calcareous fillers on bituminous mix aging, Transport Res. Rec. J. Transport. Res. Board, 2007, 140
S.E. Zoorob, J.P. Castro-Gomes, L.A. Pereira Oliveira, J. O’Connell, Investigating the multiple stress creep recovery bitumen characterisation test, J. Construct. Build. Mater. 30 (2012) 734–745.
P. Bryant, Filler: is it fixing your binder, Proceedings AAPA Pavements Industry Conference, Surfers Paradise, Queensland, Australia, 18–21 September 2005.
G.W. White, Systematic Diagnosis of Factors Leading to Cyclic Shear Creep of Airport Asphalt Surfaces, A Dissertation submitted to the Faculty of Science, Health, Education and Engineering, University of the Sunshine Coast, for the Award of Doctor of Philosophy, August 2015.
Sebaaly, 1998, Impact of anti-strip agents on properties of Idaho hot-mix asphalt mixture, Transport. Res. Rec. J. Transport. Res. Board, 2007, 65
Putman, 2006
Pickering, 1992, Evaluation of new generation of antistripping agents, Transport. Res. Rec. J. Transport. Res. Board, 1342, 26
Nazirizad, 2015, Evaluation of effects of anti-stripping agent on the performance of asphalt mixtures, Constr. Build. Mater., 84, 348, 10.1016/j.conbuildmat.2015.03.024
Kennedy, 1991, Evaluation of effectiveness of anti-stripping additives in protecting asphalt mixtures from moisture damage, J. Assoc. Asphalt Paving Technol., 60, 230
Josh, 2015
H. Abraham, Asphalts and Allied Products: Their occurrence, Modes of Production, uses in the Arts and Methods of Testing: Volume Three: Manufactured Products, 6th ed., D Van Nostrand Company, New York City, USA, 1962.
G. Holleran, I. Holleran, J. Vercoe, A. D’Angelo, S. Bearsley, A. Stevens, J. Towler, Bitumen in New Zealand – performance based asphalt binder specification, NZTA/NZIHT 15th Annual Conference, Queenstown, New Zealand, 2–4 November 2014.
Button, 1985, Identifying tender asphalt mixtures in the laboratory, Transport Res. Rec. J. Transport. Res. Board, 1034, 20
G. Holleran, I. Holleran, Bitumen chemistry using cheaper sources – an improved method of measurement by TLC-FID and the characterisation of bitumen by rheology and compositional means, 24th ARRB Conference, Melbourne, Victoria, Australia, 12–15 October 2010.
Oliver, 2009, Changes in chemical composition of Australian bitumens, Road Mater. Pavement Des., 10, 569, 10.1080/14680629.2009.9690214
White, 2016, Inter-batch and Inter-feedstock variability of an acid modified bitumen, Road Mater. Pavement Des., 17, 658, 10.1080/14680629.2015.1108220
G. Holleran, I. Holleran, Bitumen processing, rheology, composition and performance, 25th ARRB Conference, Perth, Western Australia, Australia, 23–26 September 2012.
Baumgardner, 2012, Evaluation of new dynamic shear rheometer testing geometry for performance testing of crumb rubber-modified binder, Transport Res. Rec. J. Transport. Res. Board, 2293, 73, 10.3141/2293-09
D’Angelo, 2009, Current status of Superpave binder specification, Roads Materials and Pavement Des., 10, 13, 10.1080/14680629.2009.9690233
White, 2016, Grading highly modified binders by multiple stress creep recovery, Road Mater. Pavement Des.
P.M. Harnsberger, M.J. Farrar, S.-C. Huang, R.E. Robertson, Comparative field performance using multiple crude oil sources, in: Proceedings Transport Research Board Annual Meeting, Washington, USA, 23–27 January 2011.
J. Wu, E. Lepercq, G.D. Airey, Aging bitumen in bulk versus the aging of bitumen in an asphalt mixture, Advanced Characterisation of Pavement and Soil Engineering Materials, Athens, Greece, 20–22 June 2007 1631–1640.
Crawford, 1986
Qiu, 2013, Influence of filler-bitumen ratio on performance of modified asphalt mortar by additive, J. Modern Transport., 21, 40, 10.1007/s40534-013-0002-2
P.M. Muraya, A.A.A. Molenaar, M.F.C van de Ven, Contribution of asphalt mix components to permanent deformation resistance, in: Eight International Conference on the Bearing Capacity of Roads, Railways and Airfields, Urbana-Champaign, Illinois, USA, 29 June - 2 July 2009, 259–268.
Faheem, 2010, Modelling of asphalt mastic in terms of filler-bitumen interaction, Road Mater. Pavement Des., 11, 281, 10.1080/14680629.2010.9690335
Drescher, 2010, On the behaviour of a parallel elasto-visco-plastic model for asphaltic materials, Mech. Mater., 42, 109, 10.1016/j.mechmat.2009.10.005
Little, 2005, Unique effects of hydrated lime filler on the performance-related properties of asphalt cement: physical and chemical interactions revisited, J. Mater. Civ. Eng., 17, 207, 10.1061/(ASCE)0899-1561(2005)17:2(207)
Ping, 2013, The research on the index of high temperature performance of asphalt mixture in airfield, Adv. Mater. Res., 723, 1076, 10.4028/www.scientific.net/AMR.723.1076
2000
A.I. Cooley, E.R. Brown, D.E. Watson, Evaluation of OGFC containing Cellulose Fibers, NCAT Report 00–05, National Centre for Asphalt Technology, December 2000.
Song, 2015, Factors affecting shear strength between open-graded friction course and underlying layer, Constr. Build. Mater., 101, 527, 10.1016/j.conbuildmat.2015.10.036
Jones, 1973, Friction overlay improves runway skid resistance, Civ. Eng., 43, 45
White, 1976
P.B. Joubert, L. GounderL, S. van Wyk, Experimental asphalt sections in the runway touch down zone on Johannesburg international airport, 8th Conference on Asphalt Pavements for Southern Africa, Sun City, South Africa, 12–16 September 2004.
Nunn, 1994
Campbell, 1999
Qiu, 2006, Design and performance of stone mastic asphalt, J. Transport. Eng., 132, 956, 10.1061/(ASCE)0733-947X(2006)132:12(956)
Evaluation of Stone Mastic Asphalt (SMA) for Airfield Pavements, AAPTP 04–04, National Centre for Asphalt Technology, February 2009.
W. Hofsink, M.C. Barnard, SMA wearing courses on runways and taxiway – recent experience in South Africa, in: 13th International flexible pavement conference, Surfers Paradise, Queensland, Australia, 11–14 October 2009.
S.U. Xin, SMA and heated pavement in China, Federal Aviation Administration Pavement Working Group Meeting, Atlantic City, New Jersey, USA, 15–17 April 2013.
S.U. Xin, Research and practice on asphalt overlay in China, ICAO Regional Workshop on Airport Pavements-Design & Evaluation, Macao, China, 4–6 March 2015.
2013
Hakim, 2014, UK airfield pavement design using French asphalts, Transportation, 167, 27
I. Widyatmoko, B. Hakim, C. Fergusson, Pavement sustainability and performance improvement: case studies, XXIVth PIARC Congress – Airfield Pavement Seminar, Mexico City, Mexico, 27–30 September 2011.
I. Widyatmoko, B. Hakim, C. Fergusson, J. Richardson, S. Cant, Sustainable airport pavement using French asphaltic materials (BBA and EME2), 2nd European Airport Pavement Workshop, Amsterdam, Netherlands, 13–14 May 2009.
Widyatmoko, 2013, Long-term monitoring of high performance airfield pavement surfacing, Int. J. Pavement Res. Technol., 6, 582
O. Takahashi, Y, Hachiya, Y. Tsubokawa, Applicability of the large stone asphalt concretes for surface course of heavy-duty airport pavements, FAA Airport Technology Transfer Conference, Galloway, New Jersey, USA, May 2002.
Warm Mix Asphalt (WMA) Review, AP-T91/07, Austroads Project Number TT1220, Sydney, New South Wales, Australia, November 2007.
Hajj, 2008
White, 2015, Warm mix asphalt for Australian airports, Int. J. Pavement Eng. Asphalt Technol., 16, 11, 10.1515/ijpeat-2015-0001
Su, 2009, Laboratory evaluation of WMA mixture for use in airport pavement rehabilitation, Constr. Build. Mater., 23, 2709, 10.1016/j.conbuildmat.2008.12.011
J.F. Rushing, M. Mejias-Santiago, J.D Doyle, Assessment of warm-mix asphalt for heavy traffic airfields, Transport. Res. Rec. J. Transport. Res. Board, 2371 (2013) 41–48.
Hajj, 2010, Evaluation of the use of reclaimed asphalt pavement in airfield HMA Pavements, J. Transport. Eng., 136, 181, 10.1061/(ASCE)TE.1943-5436.0000090
Guercio, 2015, Quantifying the performance of warm-mix asphalt and reclaimed asphalt pavement in flexible airfield pavements, Transport. Res. Rec. J. Transport. Res. Board, 2471, 33, 10.3141/2471-05
Hayward, 2009
Pavement Interactives, Laboratory Wheel Tracking Devices, 1 July 2011. http://www.pavementinteractive.org/article /laboratory-wheel-tracking-devices/, (accessed 21.11.14).
Williams, 1999, Comparison of laboratory wheel-tracking test results with WesTrack performance, Transport Res. Rec. J. Transport. Res. Board, 1681, 121, 10.3141/1681-15
S. Emery, I. Mihaljevic, Accelerated load testing of asphalt mix design for heavy duty pavements in hot climates, in: Proceedings 23rd ARRB Conference, Adelaide, South Australia, Australia, 22–23 July 2008.
F. Hugo, I. Bowler, J. Liebenberg, D. Rossman, Evaluation of performance of asphalt paving mixes under harsh conditions using the MMLS3, in: 10th Conference on Asphalt Pavements for Southern Africa, Natal, South Africa, 11–14 September 2011.
K.E. Kaloush, Simple Performance Test for Permanent Deformation of Asphalt Mixtures, A Dissertation presented in Partial Fulfilment of the Requirements for the Degree of Doctor of Philosophy, Arizona State University, Tempe, Arizona, USA, May 2001.
Simple Performance Tests, 2005
Rushing, 2014, Static creep and repeated load as rutting performance tests for airport HMA mix design, J. Mater. Civ. Eng., 26, 1, 10.1061/(ASCE)MT.1943-5533.0000952
Castell, 2000, Fatigue crack growth in pavements, J. Transport. Eng., 126, 283, 10.1061/(ASCE)0733-947X(2000)126:4(283)
Mollenhauer, 2012, Evaluation of hot-mix asphalt susceptibility to temperature-induced top-down fatigue cracking by means of uniaxial cyclic tensile stress test, Road Mater. Pavement Des., 13, 171, 10.1080/14680629.2012.664524
Molenaar, 2001, Prediction of fatigue cracking in asphalt pavements: do we follow the right approach?, Transport Res. Rec. J. Transport. Res. Board, 2007, 155
Wagoner, 2005, Development of a single-edge notched beam test for asphalt concrete mixtures, J. Test. Eval., 33, 1, 10.1520/JTE12579
Thom, 2007, Asphalt cracking: a Nottingham perspective, Engenharia Civil, 26, 75
2010
C.-G. Wallman, H. Astrom, Friction Measurement Methods and the Correlation between Road Friction and Traffic Safety, VIT meddelande 911A–2001, Swedish National Road and Transport Research Institute, 2001.
Asi, 2007, Evaluating skid resistance of different asphalt concrete mixes, Build. Environ., 42, 325, 10.1016/j.buildenv.2005.08.020
Abe, 2001, Measurement of pavement macrotexture with circular texture meter, Transport. Res. Rec. J. Transport. Res. Board, 1764, 201, 10.3141/1764-21
Sengoz, 2012, Comparison of pavement surface texture determination by sand patch test and 3D laser scanning, Civ. Eng., 56, 73
Araujo, 2015, Measuring skid resistance of hot mix asphalt using the aggregate image measurement system, Construct. Build. Mater., 98, 476, 10.1016/j.conbuildmat.2015.08.117
Evaluation of Circular Texture Meter for Measuring Surface Texture of Pavements, NCAT Report 04–05, National Centre for Asphalt Technology, September 2004.
Rajaei, 2014, Establishment of a relationship between pavement surface friction and mixture design properties, Transport Res. Rec. J. Transport. Res. Board, 2457, 114, 10.3141/2457-12
Kennedy, 1984
2003
Jeong, 2010, Statistical applications and stochastic analysis for performance-related specification of asphalt quality assurance, Transport. Res. Rec. J. Transport. Res. Board, 2151, 84, 10.3141/2151-11
B.K. Diefenderfer, J.W. Bryant, Development of a pavement warranty contract and performance specification for hot-mix asphalt resurfacing project, 2006 Airfield and Highway Pavements Specialty Conference, Atlanta, Georgia, USA, 1–3 May 2006.
Cui, 2004, Use of warranties on highway projects, J. Manage. Eng., 20, 118, 10.1061/(ASCE)0742-597X(2004)20:3(118)
S.W. Krebs, B. Duckert, S. Schwandt, J. Volker, T. Brokaw, Asphalt Pavement Warranties: A five year progress report, Wisconsin Department of Transportation, June 2001.
M. Moenielel, E. de Vries, New opportunities in performance based contracts, 6th Eurasphalt & Eurobitume Congress, Prague, Czech Republic, 1–3 June 2016.
O. Ero-Phillips, Recent advances in performance based characterisation of asphalt mixtures – a review, 8th International Conference on Maintenance and Rehabilitation of Pavements, Singapore, 27–29 July 2016.