Stable pH responsive layer-by-layer assemblies of partially hydrolysed poly(2-ethyl-2-oxazoline) and poly(acrylic acid) for effective prevention of protein, cell and bacteria surface attachment

Vasilev, 2009, Antibacterial surfaces for biomedical devices, Expert Rev. Med. Devices, 6, 553, 10.1586/erd.09.36 Pavithra, 2008, Biofilm formation, bacterial adhesion and host response on polymeric implants—issues and prevention, Biomed. Mater., 3, 034003, 10.1088/1748-6041/3/3/034003 Wisniewski, 2000, Methods for reducing biosensor membrane biofouling, Colloid Surf. B: Biointerfaces, 18, 197, 10.1016/S0927-7765(99)00148-4 Boardman, 2013, Comparison of anti-fouling surface coatings for applications in bacteremia diagnostics, Anal. Methods, 5, 273, 10.1039/C2AY25662B Malhotra, 2015, Antimicrobial food packaging: potential and pitfalls, Front. Microbiol., 6, 10.3389/fmicb.2015.00611 Zhang, 2016, Antifouling membranes for sustainable water purification: strategies and mechanisms, Chem. Soc. Rev., 45, 5888, 10.1039/C5CS00579E Whelan, 2006, Antifouling strategies for marine and riverine sensors, J. Environ. Monit., 8, 880, 10.1039/b603289c Chambers, 2006, Modern approaches to marine antifouling coatings, Surf. Coat. Technol., 201, 3642, 10.1016/j.surfcoat.2006.08.129 Fordtran, 2017, Seventy years of polyethylene glycols in gastroenterology: the journey of PEG 4000 and 3350 from nonabsorbable marker to colonoscopy preparation to osmotic laxative, Gastroenterology, 152, 675, 10.1053/j.gastro.2017.01.027 Harris, 1997 Prime, 1991, Self-assembled organic monolayers: model systems for studying adsorption of proteins at surfaces, Science, 252, 1164, 10.1126/science.252.5009.1164 Tosatti, 2003, Peptide functionalized poly(L-lysine)-g-poly(ethylene glycol) on titanium: resistance to protein adsorption in full heparinized human blood plasma, Biomaterials, 24, 4949, 10.1016/S0142-9612(03)00420-4 Li, 2012, Surface modification of silicone for biomedical applications requiring long-term antibacterial, antifouling, and hemocompatible properties, Langmuir, 28, 16408, 10.1021/la303438t Ding, 2012, Antibacterial and antifouling catheter coatings using surface grafted PEG-b-cationic polycarbonate diblock copolymers, Biomaterials, 33, 6593, 10.1016/j.biomaterials.2012.06.001 Khalil, 2014, Biomimetic PEG-catecholates for stabile antifouling coatings on metal surfaces: applications on TiO2 and stainless steel, Colloids Surf. B Biointerfaces, 117, 185, 10.1016/j.colsurfb.2014.02.022 Schellekens, 2013, The immunogenicity of polyethylene glycol: facts and fiction, Pharm. Res., 30, 1729, 10.1007/s11095-013-1067-7 Garay, 2012 Armstrong, 2007, Antibody against poly (ethylene glycol) adversely affects PEG‐asparaginase therapy in acute lymphoblastic leukemia patients, Cancer, 110, 103, 10.1002/cncr.22739 Tagami, 2010, CpG motifs in pDNA-sequences increase anti-PEG IgM production induced by PEG-coated pDNA-lipoplexes, J. Control. Release, 142, 160, 10.1016/j.jconrel.2009.10.017 Tillmann, 2010, 307 High prevalence of pre-existing antibodies against polyethylene glycol (PEG) in hepatitis C (HCV) patients which is not associated with impaired response to PEG-interferon, J. Hepatol., 52, S129, 10.1016/S0168-8278(10)60309-1 Tauhardt, 2014, Amine end-functionalized poly (2-ethyl-2-oxazoline) as promising coating material for antifouling applications, J. Mater. Chem. B, 2, 4883, 10.1039/C4TB00193A Lowe, 2015, Antibiofouling polymer interfaces: poly (ethylene glycol) and other promising candidates, Polym. Chem., 6, 198, 10.1039/C4PY01356E Sedlacek, 2012, Poly(2-oxazoline)s–are they more advantageous for biomedical applications than other polymers?, Macromol. Rapid Commun., 33, 1648, 10.1002/marc.201200453 Luxenhofer, 2012, Poly (2-oxazoline) s as polymer therapeutics, Macromol. Rapid Commun., 33, 1613, 10.1002/marc.201200354 Luxenhofer, 2011, Structure-property relationship in cytotoxicity and cell uptake of poly (2-oxazoline) amphiphiles, J. Control. Release, 153, 73, 10.1016/j.jconrel.2011.04.010 Hartlieb, 2015, Covalently cross-linked poly (2-oxazoline) materials for biomedical applications–from hydrogels to self-assembled and templated structures, J. Mater. Chem. B, 3, 526, 10.1039/C4TB01660B Gaertner, 2007, Synthesis, biodistribution and excretion of radiolabeled poly (2-alkyl-2-oxazoline) s, J. Control. Release, 119, 291, 10.1016/j.jconrel.2007.02.015 Viegas, 2011, Polyoxazoline: chemistry, properties, and applications in drug delivery, Bioconjugate Chem., 22, 976, 10.1021/bc200049d Moreadith, 2017, Clinical development of a poly (2-oxazoline)(POZ) polymer therapeutic for the treatment of Parkinson’s disease–proof of concept of POZ as a versatile polymer platform for drug development in multiple therapeutic indications, Eur. Polym. J., 88, 524, 10.1016/j.eurpolymj.2016.09.052 Konradi, 2012, Polyoxazolines for nonfouling surface coatings–a direct comparison to the gold standard PEG, Macromol. Rapid Commun., 33, 1663, 10.1002/marc.201200422 Konradi, 2008, Poly-2-methyl-2-oxazoline: a peptide-like polymer for protein-repellent surfaces, Langmuir, 24, 613, 10.1021/la702917z Pidhatika, 2010, The role of the interplay between polymer architecture and bacterial surface properties on the microbial adhesion to polyoxazoline-based ultrathin films, Biomaterials, 31, 9462, 10.1016/j.biomaterials.2010.08.033 Pidhatika, 2012, Comparative stability studies of poly (2-methyl-2-oxazoline) and poly (ethylene glycol) brush coatings, Biointerphases, 7, 1, 10.1007/s13758-011-0001-y Wang, 2011, Evaluation of photochemically immobilized poly(2-ethyl-2-oxazoline) thin films as protein-Resistant surfaces, ACS Appl. Mater. Interfaces, 3, 3463, 10.1021/am200690s Ostuni, 2001, A survey of structure- property relationships of surfaces that resist the adsorption of protein, Langmuir, 17, 5605, 10.1021/la010384m Kawai, 1978, Bacterial oxidation of polyethylene glycol, Appl. Environ. Microbiol., 35, 679, 10.1128/AEM.35.4.679-684.1978 Rossegger, 2013, Design strategies for functionalized poly (2-oxazoline) s and derived materials, Polymers, 5, 956, 10.3390/polym5030956 Tauhardt, 2013, Poly(2-oxazoline) functionalized surfaces: from modification to application, Chem. Soc. Rev., 42, 7998, 10.1039/c3cs60161g Zhang, 2012, Tailored poly(2-oxazoline) polymer brushes to control protein adsorption and cell adhesion, Macromol. Biosci., 12, 926, 10.1002/mabi.201200026 He, 2016, Efficient and robust coatings using poly (2-methyl-2-oxazoline) and its copolymers for marine and bacterial fouling prevention, J. Polym. Sci. A Polym. Chem., 54, 275, 10.1002/pola.27912 Such, 2011, Engineered hydrogen-bonded polymer multilayers: from assembly to biomedical applications, Chem. Soc. Rev., 40, 19, 10.1039/C0CS00001A Decher, 1997, Fuzzy nanoassemblies: toward layered polymeric multicomposites, Science, 277, 1232, 10.1126/science.277.5330.1232 Kharlampieva, 2009, Layer-by-layer hydrogen-Bonded polymer films: from fundamentals to applications, Adv. Mater., 21, 3053, 10.1002/adma.200803653 da Fonseca Antunes, 2013, Hydrogen bonded polymeric multilayer films assembled below and above the cloud point temperature, Chem. Commun., 49, 9663, 10.1039/c3cc45068f Erel, 2011, Effect of structural isomerism and polymer end group on the pH-stability of hydrogen-bonded multilayers, J. Colloid Interface Sci., 361, 477, 10.1016/j.jcis.2011.05.033 Hendessi, 2017, Hydrogen bonded multilayers of poly (2-ethyl-2-oxazoline) stabilized silver nanoparticles and tannic acid, Eur. Polym. J., 88, 666, 10.1016/j.eurpolymj.2016.10.039 Kempe, 2014, Intracellularly degradable hydrogen-bonded polymer capsules, Adv. Funct. Mater., 24, 6187, 10.1002/adfm.201401397 Kempe, 2013, Clickable poly(2-oxazoline) architectures for the fabrication of low-fouling polymer capsules, Acs Macro Lett., 2, 1069, 10.1021/mz400522e Lichkus, 1988, Hydrogen bonding in polymer blends. 5. blends involving polymers containing methacrylic acid and oxazoline groups, Macromolecules, 21, 2636, 10.1021/ma00186a054 Lambermont-Thijs, 2010, Linear poly(ethylene imine)s by acidic hydrolysis of poly(2-oxazoline)s: kinetic screening, thermal properties, and temperature-induced solubility transitions, Macromolecules, 43, 927, 10.1021/ma9020455 Kwon, 1991, Electrically erodible polymer gel for controlled release of drugs, Nature, 354, 291, 10.1038/354291a0 Chen, 1988, Intermacromolecular complexes by insitu polymerization, Polymer, 29, 2285, 10.1016/0032-3861(88)90123-1 Li, 2017, Healable antifouling films comprised of partially hydrolyzed poly (2-ethyl-2-oxazoline) and poly (acrylic acid), ACS Appl. Mater. Interfaces, 9, 14429, 10.1021/acsami.7b02872 Kharlampieva, 2006, Hydrogen-bonded layer-by-layer polymer films, Polym. Rev., 46, 377 Picart, 2001, Buildup mechanism for poly(L-lysine)/hyaluronic acid films onto a solid surface, Langmuir, 17, 7414, 10.1021/la010848g Picart, 2002, Molecular basis for the explanation of the exponential growth of polyelectrolyte multilayers, Proc. Natl. Acad. Sci. U. S. A., 99, 12531, 10.1073/pnas.202486099 Haynie, 2011, In and out diffusion hypothesis of exponential multilayer film buildup revisited, Langmuir, 27, 5700, 10.1021/la104516a Gomes, 2013, Layer-by-layer films from wine: an investigation of an exponential growth process, J. Nanomater., 1, 10.1155/2013/437203 Liu, 2014, Surface grafted chitosan gels. part I. molecular insight into the formation of chitosan and poly(acrylic acid) multi layers, Langmuir, 30, 8866, 10.1021/la5013186 Lavalle, 2002, Comparison of the structure of polyelectrolyte multilayer films exhibiting a linear and an exponential growth regime: an in situ atomic force microscopy study, Macromolecules, 35, 4458, 10.1021/ma0119833 Sukhishvili, 2002, Layered, erasable polymer multilayers formed by hydrogen-bonded sequential self-assembly, Macromolecules, 35, 301, 10.1021/ma011346c Sukhishvili, 2000, Layered, erasable, ultrathin polymer films, J. Am. Chem. Soc., 122, 9550, 10.1021/ja002410t Kozlovskaya, 2008, Tuning swelling pH and permeability of hydrogel multilayer capsules, Soft Matter, 4, 1499, 10.1039/b719952j Dan, 2003, The effect of charge regulation on cell adhesion to substrates: salt-induced repulsion, Colloids Surf. B–Biointerfaces, 27, 41, 10.1016/S0927-7765(02)00041-3 An, 1998, Concise review of mechanisms of bacterial adhesion to biomaterial surfaces, J. Biomed. Mater. Res., 43, 338, 10.1002/(SICI)1097-4636(199823)43:3<338::AID-JBM16>3.0.CO;2-B Nakanishi, 2001, On the adsorption of proteins on solid surfaces, a common but very complicated phenomenon, J. Biosci. Bioeng., 91, 233, 10.1016/S1389-1723(01)80127-4 Ladam, 2000, Protein interactions with polyelectrolyte multilayers: interactions between human serum albumin and polystyrene sulfonate/polyallylamine multilayers, Biomacromolecules, 1, 674, 10.1021/bm005572q Ladam, 2001, Protein adsorption onto auto-assembled polyelectrolyte films, Langmuir, 17, 878, 10.1021/la0013087 Ma, 2013, Increased protein sorption in poly (acrylic acid)-containing films through incorporation of comb-like polymers and film adsorption at low pH and high ionic strength, Langmuir, 29, 2946, 10.1021/la305137m Salloum, 2004, Protein adsorption modalities on polyelectrolyte multilayers, Biomacromolecules, 5, 1089, 10.1021/bm034522t Liu, 2010, pH-controllable bioelectrocatalysis of glucose by glucose oxidase loaded in weak polyelectrolyte layer-by-layer films with ferrocene derivative as mediator, Electrochim. Acta, 55, 6426, 10.1016/j.electacta.2010.06.042 d. Vogt, 2012, Mobility of proteins in highly hydrated polyelectrolyte multilayer films, J. Phys. Chem. B, 116, 5269, 10.1021/jp300028v Chen, 1997, Geometric control of cell life and death, Science, 276, 1425, 10.1126/science.276.5317.1425 Ostuni, 2001, Self-assembled monolayers that resist the adsorption of proteins and the adhesion of bacterial and mammalian cells, Langmuir, 17, 6336, 10.1021/la010552a Tidwell, 1997, Endothelial cell growth and protein adsorption on terminally functionalized, self-assembled monolayers of alkanethiolates on gold, Langmuir, 13, 3404, 10.1021/la9604341 Culp, 1998, Cell type-specific modulation of fibronectin adhesion functions on chemically-derivatized self-assembled monolayers, J. Biomater. Sci. Polym. Ed., 9, 1161, 10.1163/156856298X00703 McClary, 2000, Modulating fibroblast adhesion, spreading, and proliferation using self-assembled monolayer films of alkylthiolates on gold, J. Biomed. Mater. Res. A, 50, 428, 10.1002/(SICI)1097-4636(20000605)50:3<428::AID-JBM18>3.0.CO;2-H Gribova, 2011, Polyelectrolyte multilayer assemblies on materials surfaces: from cell adhesion to tissue engineering, Chem. Mater., 24, 854, 10.1021/cm2032459 Mendelsohn, 2003, Rational design of cytophilic and cytophobic polyelectrolyte multilayer thin films, Biomacromolecules, 4, 96, 10.1021/bm0256101 Arias, 2016, Cell adhesion and proliferation on the living surface of a polyelectrolyte multilayer, Langmuir, 32, 5412, 10.1021/acs.langmuir.6b00784 Lichter, 2009, Design of antibacterial surfaces and interfaces: polyelectrolyte multilayers as a multifunctional platform, Macromolecules, 42, 8573, 10.1021/ma901356s Guo, 2017, Controlling cell adhesion using layer-by-layer approaches for biomedical applications, Mater. Sci. Eng. C, 70, 1163, 10.1016/j.msec.2016.03.074 Dickson, 1989, Cell surface charge characteristics and their relationship to bacterial attachment to meat surfaces, Appl. Environ. Microb., 55, 832, 10.1128/AEM.55.4.832-836.1989 Zhu, 2015, Polyion multilayers with precise surface charge control for antifouling, ACS Appl. Mater. Interfaces, 7, 852, 10.1021/am507371a