Stability and Reinforcement Analysis of Superlarge Exhaust Cooling Towers Based on a Wind Tunnel Test

Journal of Structural Engineering - Tập 141 Số 12 - 2015
Shitang Ke1, Yihe Ge2, X. X. Cheng3, Yukio Tamura4
1Associate Professor, Dept. of Civil Engineering, Nanjing Univ. of Aeronautics and Astronautics, Yudao Rd. 29, Nanjing 210016, China (corresponding author).
2Professor, State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji Univ., Siping Rd. 1239, Shanghai 200092, China.
3Associate Professor, State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji Univ., Siping Rd. 1239, Shanghai 200092, China.
4Professor, Wind Engineering Research Center, Tokyo Polytechnic Univ., 1583 Iiyama, Atsugi, Kanagawa 243-0297, Japan.

Tóm tắt

Từ khóa


Tài liệu tham khảo

10.1061/JSDEAG.0005384

Bartoli G. Borri C. Hoeffer R. and Orlando M. (1997). “Wind induced pressures and interference effects on a group of cooling towers in a power plant rrangement.” Proc. 2nd European and African Conf. on Wind Engineering Springer Dordrecht Netherlands 969–976.

10.1016/S0141-0296(02)00082-2

10.12989/sem.2014.50.6.797

10.12989/was.2008.11.6.479

Harte R. and Wittek U. (2009). “Recent developments of cooling tower design.” Symp. of the Int. Association for Shell and Spatial Structures Editorial Universitat Politècnica de València Valencia Spain 198–210.

Isyumov, N., Abu-Sitta, S. H., and Davenport, A. G. (1972). “Approaches to the design of hyperbolic cooling towers against the dynamic action of wind and earthquakes.” Bull. Int. Assoc. Shell Struct., 48(12), 3–22.

10.1016/j.jweia.2014.07.003

10.1016/j.jweia.2012.08.001

10.12989/sem.2013.46.5.735

Lin, Z., and Ge, Y. (2008). “Equivalent beam-net design theory of aero-elastic model about hyperbolic thin-shell cooling towers and its experimental investigation.” J. Vib. Eng., 21(1), 31–37 (in Chinese).1004-4523

10.1061/JSDEAG.0005212

10.1016/S0141-0296(97)00131-4

10.1016/S0045-7949(02)00421-2

10.1016/S0141-0296(00)00110-3

10.1007/s12206-012-0323-9

10.1016/0167-6105(94)00051-E

10.12989/was.2014.19.4.443

10.12989/was.2010.13.3.257