Spray cooling heat transfer: The state of the art

Aguilar, 2001, Influence of nozzle-to-skin distance in cryogen spray cooling for dermatologic laser surgery, Lasers in Surgery and Medicine, 28, 113, 10.1002/lsm.1025

Aguilar, 2001, Measurement of heat flux and heat transfer coefficient during continuous cryogen spray cooling for laser dermatologic surgery, IEEE Journal on Selected Topics in Quantum Electronics, 7, 1013, 10.1109/2944.983307

Aguilar, 2003, Dynamic behavior of cryogen spray cooling: effects of spurt duration and spray distance, Lasers in Surgery and Medicine, 32, 152, 10.1002/lsm.10133

Amon, 2005, Microelectromechanical system-based evaporative thermal management of high heat flux electronics, Journal of Heat Transfer, 127, 66, 10.1115/1.1839586

Basinger, 2004, Effect of skin indentation on heat transfer during cryogen spray cooling, Lasers in Surgery and Medicine, 34, 155, 10.1002/lsm.20011

Baysinger, K.M., Yerkes, K.L., Michalak, T.E., Harris, R.J., McQuillen, J., 2004. Design of a microgravity spray cooling experiment. In: Proceedings of the 42nd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV.

Bernardin, 1997, Mapping of impact and heat transfer regimes of water drops impinging on a polished surface, International Journal of Heat and Mass Transfer, 40, 1996, 10.1016/0017-9310(96)00119-6

Bernardin, 1997, Effects of surface roughness on water droplet impact history and heat transfer regimes, International Journal of Heat and Mass Transfer, 40, 1996, 10.1016/0017-9310(96)00119-6

Cader, 2004, Spray cooling thermal management for increased device reliability, IEEE Transactions on Device and Materials Reliability, 4, 605, 10.1109/TDMR.2004.838978

Chen, 1966, Correlation for boiling heat transfer to saturated fluids in convective flow, Industrial and Engineering Chemistry Process Design and Development, 5, 322, 10.1021/i260019a023

Chen, 2002, Effects of spray characteristics on critical heat flux in subcooled water spray cooling, International Journal of Heat and Mass Transfer, 45, 4033, 10.1016/S0017-9310(02)00113-8

Chen, 2004, Optimal spray characteristic in water spray cooling, International Journal of Heat and Mass Transfer, 47, 5095, 10.1016/j.ijheatmasstransfer.2004.05.033

Chen, R.H., Tan, D.S., Lin, Juo-Chi, Chow, L.C., Griffin, A.R., Rini, D.P., 2005. Droplet and bubble dynamics in saturated FC-72 spray cooling. In: Proceedings of the 2005 ASME IMECE, Olrando, FL.

Coursey, J., Kim, J., Kiger, K.T., 2006. Spray cooling of high aspect ratio open microchannels. In: Proceedings of ITHERM 2006, San Diego, CA.

Demiray, 2004, Microscale heat transfer measurements during pool boiling of FC-72: effect of subcooling, International Journal of Heat and Mass Transfer, 47, 3257, 10.1016/j.ijheatmasstransfer.2004.02.008

di Marzo, 1993, Evaporative cooling due to a gently deposited droplet, International Journal of Heat and Mass Transfer, 36, 4133, 10.1016/0017-9310(93)90075-H

Estes, 1995, Correlation of Sauter mean diameter and critical heat flux for spray cooling of small surfaces, International Journal of Heat and Mass Transfer, 38, 2985, 10.1016/0017-9310(95)00046-C

Estes, 1995, Correlation of Sauter mean diameter and critical heat flux for spray cooling of small surfaces, International Journal of Heat and Mass Transfer, 38, 2985, 10.1016/0017-9310(95)00046-C

Ghodbane, 1991, Experimental study of spray cooling with Freon-113, International Journal of Heat and Mass Transfer, 34, 1163, 10.1016/0017-9310(91)90025-A

Horacek, 2004, Spray cooling using multiple nozzles: visualization and wall heat transfer measurements, IEEE Transactions on Device and Materials Reliability, 4, 614, 10.1109/TDMR.2004.838399

Horacek, 2005, Single nozzle spray cooling heat transfer mechanisms, International Journal of Heat and Mass Transfer, 48, 1425, 10.1016/j.ijheatmasstransfer.2004.10.026

Hsieh, 2006, Evaporative heat transfer characteristics of a water spray on micro-structured silicon surfaces, International Journal of Heat and Mass Transfer, 49, 962, 10.1016/j.ijheatmasstransfer.2005.09.013

Kim, 2004, Evaporative spray cooling of plain and microporous coated surfaces, International Journal of Heat and Mass Transfer, 47, 3307, 10.1016/j.ijheatmasstransfer.2004.01.018

Kopchikov, 1969, Liquid boiling in a thin film, International Journal of Heat and Mass Transfer, 12, 791, 10.1016/0017-9310(69)90182-3

Lee, 2000, Droplet cooling heat transfer model validation, SAE Transactions Journal of Aerospace, 109, 925

Lee, 2001, Time and space resolved heat transfer characteristics of single droplet cooling using microscale heater arrays, International Journal of Heat and Fluid Flow, 22, 188, 10.1016/S0142-727X(00)00082-5

Lee, 2002, Enhancement of droplet heat transfer using dissolved gases, SAE Transactions Journal of Aerospace, 736

Lin, 2003, Heat transfer characteristics of spray cooling in a closed loop, International Journal of Heat and Mass Transfer, 46, 3737, 10.1016/S0017-9310(03)00217-5

Lin, L., Ponnappan, R., Yerkes, K., Hager, B., 2004. Large area spray cooling. In: 42nd AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, pp. 10838–10843.

Liu, 2000, Characterisation of the spray cooling heat transfer involved in a high pressure die casting process, International Journal of Thermal Science, 39, 582, 10.1016/S1290-0729(00)00207-6

Milke, 1997, Effect of dissolved gases on spray evaporative cooling with water, Fire Technology, 2nd Quarter, 33

Monde, 1980, Burnout heat flux in saturated forced convection boiling with two or more impinging jets, Transactions of the JSME, 46, 1834, 10.1299/kikaib.46.1834

Mudawar, 1996, Optimizing and predicting CHF in spray cooling of a square surface, Journal of Heat Transfer, 118, 672, 10.1115/1.2822685

Ortiz, 1999, Experiments on steady-state high heat fluxes using spray cooling, Experimental Heat Transfer, 12, 215, 10.1080/089161599269690

Pais, M., Tilton, D., Chow, L., Mahefky, E., 1989. High heat flux, low superheat evaporative spray cooling. In: Proceedings of the 27th AIAA Aerospace Sciences Meeting, Reno, NV.

Pais, 1992, Surface roughness and its effects on the heat transfer mechanism in spray cooling, Journal of Heat Transfer, 114, 211, 10.1115/1.2911248

Pautsch, 2006, Adiabatic and diabatic measurements of the liquid film thickness during spray cooling with FC-72, International Journal of Heat and Mass Transfer, 49, 2610, 10.1016/j.ijheatmasstransfer.2006.01.024

Pautsch, 2005, Spray impingement cooling with single- and multiple-nozzle arrays. Part I: Heat transfer data using FC-72, International Journal of Heat and Mass Transfer, 48, 3167, 10.1016/j.ijheatmasstransfer.2005.02.012

Qiao, 1997, Experiment on adding a surfactant to water drops boiling on a hot surface, Proceedings of the Royal Society of London Series A, 453, 673, 10.1098/rspa.1997.0038

Qiao, Y.M., Chandra, S., McCahan, S., 2000. Enhanced boiling of water droplets containing dissolved gases or solids. Paper No. NHTC 2000-12249, National Heat Transfer Conference, Pittsburgh, PA, August 20–22.

Rini, 2002, Bubble behavior and nucleate boiling heat transfer in saturated FC-72 spray cooling, Journal of Heat Transfer, 124, 63, 10.1115/1.1418365

Rybicki, 2006, Single-phase and two-phase cooling characteristics of upward-facing and downward-facing sprays, International Journal of Heat and Mass Transfer, 29, 5, 10.1016/j.ijheatmasstransfer.2005.07.040

Sakamoto, H., Kim, J., Kiger, K., Steinthorrson, E., 2006. Multinozzle spray cooling: effects of spray interaction. In: Proceedings of the 13th International Heat Transfer Conference, Sydney, Australia.

Schwarzkof, J., Cader, T., Okamoto, K., Li, B.Q., Ramaprian, B., 2004. Effect of spray angle in spray cooling thermal management of electronics. In: Proceedings of the ASME Heat Transfer/Fluids Engineering Summer Conference, Charlotte, NC, pp. 423–431.

Sehmbey, M.S., Pais, M.R., Chow, L.C., 1990. Effect of surface material properties and surface characteristics in evaporative spray cooling. In: AIAA/ASME 5th Joint Thermophysics and Heat Transfer Conference, AIAA 90-1728, Seattle, WA.

Shedd, 2005, Spray impingement cooling with single- and multiple-nozzle arrays. Part II: Visualization and empirical models, International Journal of Heat and Mass Transfer, 48, 3176, 10.1016/j.ijheatmasstransfer.2005.02.013

Silk, E., Kim, J., Kiger, K.T., 2004. Investigation of enhanced surface spray cooling. In: Proceedings of the ASME IMECE, Anaheim, CA, Paper No. IMECE2004-61753.

Silk, E.A., Kim, J., Kiger, K., 2005. Effect of spray cooling trajectory on heat flux for a straight finned enhanced surface. In: Proceedings of the ASME 2005 Heat Transfer Summer Conference, San Francisco, CA.

Stodke, C., Stephan, P., 2005. Spray cooling heat transfer on micro-structured surfaces. In: 6th World Conference on Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics, Matsushima, Miyagi, Japan.

Tilton, D.E., 1989. Spray cooling. Ph.D. Dissertation, University of Kentucky.

Tilton, D.E., Tilton, C.L, Pais, M.R., Morgan, M.J., 1992. High-flux spray cooling in a simulated multichip module. In: Proceedings of the 1992 ASME Heat Transfer Conference, HTD-206-2.

Toda, 1974, A study of mist cooling (1st Report: Theory of mist cooling and its fundamental experiments), Heat Transfer – Japanese Research, 3, 1

Wayner, P., 1999. Long range intermolecular forces in change of phase heat transfer (1998 Donald Q. Kern Award Review). In: ASME/AICHE National Heat Transfer Conference Paper #320, Albuquerque, NM, August 15–17.

Yang, 1996, Nucleate boiling heat transfer in spray cooling, Journal of Heat Transfer, 118, 668, 10.1115/1.2822684

Yoshida, 2001, Spray cooing under reduced gravity conditions, Journal of Heat Transfer, 123, 309, 10.1115/1.1345887

Zhirnov, 2003, Limits to binary logic switch scaling – a Gedanken model, Proceedings of the IEEE, 91, 1934, 10.1109/JPROC.2003.818324