Spectroelectrochemistry of enargite I: Reactivity in alkaline solutions

Allison, J., Brown, D., and Novo-Gradac, K., 1990, “MINTEQA2/PRODEFA2 A Geochemical Assessment Model for Environmental System,” Version 3, Environmental Research Laboratory, EPA.

Anderson, C., and Twidwell, L., 2008, “Hydrometallurgical processing of goldbearing copper enargite concentrates,” Canadian Metallurgical Quarterly, Vol. 47, No. 3, pp. 337–345.

Balaz, P., and Achimovicova, M., 2006, “Selective leaching of antimony and arsenic from mechanically activated tetrahedrite, jamesonite and enargite,” International Journal of Mineral Processing, Vol. 81, pp. 44–50.

Barin, I., 1995, Thermodynamic Data of Pure Substances, New York, NY, VCH Publishers, Inc.

Brage, M., Lamache, M., and Bauer, D., 1979, “Contribution a l’etude des sulfres de cuivre non stoichiometriques,” Electrochemica Acta, Vol. 24, pp. 25–30.

Craig, J., and Barton, P., 1973, “Thermochemical approximations for sulfosalts,” Economic Geology, Vol. 68, pp. 493–506.

Curreli, L., Ghiani, M., Surracco, M., and Orru, G., 2005, “Beneficiation of a gold bearing enargite ore by flotation and As leaching with Na-hypochlorite,” Minerals Engineering, Vol. 18, pp. 849–954.

Delfini, M., Ferrini, M., Manni, A., Massacci, P., and Piga, L., 2003, “Arsenic leaching by Na2S to decontaminate tailings coming from colemanite processing,” Minerals Engineering, Vol. 16, pp. 45–50.

Downs, R., 2006, “The RRUFF Project: An Integrated Study of the Chemistry, Crystallography, Raman and Infrared Spectroscopy of Minerals,” Program and Abstracts of the 19th General Meeting of the International Mineralogical Association in Kobe, Japan.

Etienne, A., and Peters, E., 1972, “Thermodynamic measurements in the Cu-S system in the temperature range 40–80°c,” IMM Transactions Section C, Vol. 81, pp 176–181.

Gajam, S., and Raghavan, S., 1983, “A kinetic study of enargite dissolution in ammoniacal solutions,” International Journal Of Mineral Processing, Vol. 10, pp. 113–129.

Gow, R., Young, C., Huang, H., and Hope, G., 2014a, “Spectroelectrochemistry of enargite II: Reactivity in acidic solutions,” Proceedings of Hydrometallurgy 2014, Victoria, BC.

Gow, R., Young, C., Huang, H. and Hope, G., 2014b, “Spectroelectrochemistry of enargite III: Alkaline sulfide leaching,” Minerals and Metallurgical Processing, Vol. 32, No.1.

Gow, R., Huang, H., and Young, C., 2014c, “Utility of Mass-Balanced EH-pH Diagrams I: Application of Gibbs’ Phase Rule,” submitted to Minerals and Metallurgical Processing.

Gow, R., Huang, H., and Young, C., 2014d, “Utility of Mass-Balanced EH-pH Diagrams II: Stoichiometry of the Cu-As-S-H2O System,” submitted to Minerals and Metallurgical Processing.

Haynes, W., 2011, CRC Handbook of Chemistry and Physics, 92nd Edition, CRC Press.

Helz, G., and Tossell, J., 2008, “Thermodynamic model of arsenic speciation in sulfidic waters: A novel use of ab initio computations,” Geochemica et Cosmochimica Acta, Vol. 72, pp. 4457–4468.

Huang, H., 2012, “STABCAL,” Metallurgical & Materials Engineering, Montana Tech.

Huang, H., Twidwell, L., and Young, C., 2005, “Speciation for aqueous systems — an equilibrium calculation approach,” Proceedings of COM 2005 & 35th Annual Hydrometallurgical Meeting, Calgary, Canada.

Huang, H., and Young, C., 1986, “Modification of STABCAL for the mass-balanced calculations of EH-pH diagrams,” Electrochemistry in Mineral and Metal Processing IV, Electrochemical Society, Pennington, NJ.

Koch, D., and McIntyre, R., 1976, “The application of reflectance spectroscopy to a study of the anodic oxidation of cuprous sulphide,” Journal of Electroanalytical Chemistry, Vol. 71, pp. 285–196.

Mathieu, H., and Rickert, H., 1972, “Electrochemical-thermodynamic studies on the copper-sulfur Systems at 15–90°,” Zeitschrift fur Physikalishe Chemie, Vol. 79, pp. 315–330.

Mihajlovic, I, Strbac, N., Zivkovic, Z., Kovacevic, R., and Stehernik, M., 2007, “A potential method for arsenic removal from copper concentrates,” Minerals Engineering, Vol. 20, pp. 26–33.

Nishimura, T., Itoh, C., and Tozawa, K., 1993, “Equilibria of Cu(II)-As(III,V) - H2O system at 25°C,” Bulletin of the Research Institute of Mineral Dressing and Metallurgy, Vol. 49, pp. 61–70.

Padilla, R., Rivas, C., and Ruiz, M., 2008, “Kinetics of pressure dissolution of enargite in sulfate-oxygen media,” Metallurgical and Materials Transactions B, Vol. 39B, pp. 399–407.

Potter, R., 1977, “An electrochemical investigation of the system copper-sulfur,” Economic Geology, Vol. 72, pp. 1524–1512.

Robie, R., Hemingway, B., and Fisher, J., 1984, “Thermodynamic Properties of Minerals and Related Substances at 298.15K and 1 Bar (105 Pascals) Pressure and at Higher Temperatures,” U.S. Geological Survey Bulletin 1452.

Tongamp, W., Takasaki, Y., and Shibayama, A., 2010a, “Selective leaching of arsenic from enargite in NaHS-NaOH media,” Hydrometallurgy, Vol. 101, pp. 64–68.

Tongamp, W., Takasaki, Y., and Shibayama, A., 2010b, “Precipitation of arsenic as Na3AsS4 from Cu3AsS4 — NaHS — NaO,H leach solutions,” Hydrometallurgy, Vol. 105, pp. 42–46.

Viñals, J., Roca, A., Hernandez, M., and Benavente, O., 2003, “Topochemical transformation of enargite into copper oxide by hypochlorite leaching,” Hydrometallurgy, Vol. 68, pp. 183–193.

Woods, R., Yoon, R., and Young, C., 1987, “EH-pH diagrams for stable and metastable phases in the copper-sulfur-water system,” International Journal of Mineral Processing, Vol. 20, pp. 109–120.

Young, C., Dahlgren, E., and Robins, R., 2002, “The solubility of copper sulfides under reducing conditions,” Hydrometallurgy, Vol. 68, pp. 23–31.

Young, C., Woods, R., and Yoon, R., 1988, “A voltammetric study of chalcocite oxidation to metastable copper sulfides,” Proceedings of International Symposium of Electrochemistry in Mineral and Metal Processing II, P.E. Richardson and R. Woods, eds., Electrochemical Society, Pennington, N.J., pp. 3–17.