Specific features of the structure and properties of arc-PVD coatings depending on the spatial arrangement of the sample in the chamber
Tóm tắt
Từ khóa
Tài liệu tham khảo
Daalder, 1976, Components of cathode erosion in vacuum arcs, J. Phys. Appl. Phys., 9, 2379, 10.1088/0022-3727/9/16/009
Anders, 2008
Daalder, 1975, Erosion and the origin of charged and neutral species in vacuum arcs, J. Phys. Appl. Phys., 8, 1647, 10.1088/0022-3727/8/14/009
Sablev, 1998, Vacuum-arc evaporator of metals with an extended planar cathode, Mater. Sci. Forum, 287–288, 323, 10.4028/www.scientific.net/MSF.287-288.323
Aksenov, 1988, Low-pressure arc cathode erosion, High Temp., 26, 315
Calamba, 2019, The effect of nitrogen vacancies on initial wear in arc deposited (Ti0.52, Al0.48)Ny, (y < 1) coatings during machining, Surf. Coating. Technol., 358, 452, 10.1016/j.surfcoat.2018.11.062
Dumitriu LaGrange, 2017, Microparticles formation in cathodic arc deposition of nitride coatings from TiNb alloy cathodes, J. Vac. Sci. Technol.: Vacuum, Surfaces and Films, 35, 10.1116/1.4975638
Zhirkov, 2015, Effect of cathode composition and nitrogen pressure on macroparticle generation and type of arc discharge in a DC arc source with Ti-Al compound cathodes, Surf. Coating. Technol., 281, 20, 10.1016/j.surfcoat.2015.09.030
Warcholinski, 2020, Structure and properties of AlCrN coatings deposited using cathodic arc evaporation, Coatings, 10, 793, 10.3390/coatings10080793
Baseri, 2021, The effect of duty cycle on the mechanical and electrochemical corrosion properties of multilayer CrN/CrAlN coatings produced by cathodic arc evaporation, Surf. Eng., 37, 253, 10.1080/02670844.2020.1775331
Mundotia, 2019, Effect of ion bombardment and micro-blasting on the wear resistance properties of hard TiN coatings, Mater. Today Proc., 26, 603, 10.1016/j.matpr.2019.12.171
Gilewicz, 2019, Influence of substrate bias voltage on structure, morphology and mechanical properties of AlCrN coatings synthesized using cathodic Arc evaporation, Tribology in Industry, 41, 484, 10.24874/ti.2019.41.04.03
Ovcharenko, 2015, Deposition of chromium nitride coatings using vacuum arc plasma in increased negative substrate bias voltage, Vacuum, 117, 27, 10.1016/j.vacuum.2015.04.008
Huanga, 2003, Macro-particle reduction mechanism in biased arc ion plating of TiN, Surf. Coating. Technol., 176, 109, 10.1016/S0257-8972(03)00017-3
Wang, 2008, Effect of negative bias voltage on CrN films deposited by arc ion plating. I. Microparticles filtration and film-growth characteristics, J. Vac. Sci. Technol., 26, 1258, 10.1116/1.2966432
Warcholinski, 2012, An analysis of macroparticle-related defects on CrCN and CrN coatings in dependence of the substrate bias voltage, Vacuum, 86, 1235, 10.1016/j.vacuum.2011.04.023
Xu, 2016, Ti0.33Al0.67 cathode surface modifications and the effect on the mechanical and electrochemical properties of AlTiN coating, Vacuum, 131, 97, 10.1016/j.vacuum.2016.05.016
Martin, 2005, Nanocomposite Ti-Si-N, Zr-Si-N, Ti-Al-Si-N, Ti-Al-V-Si-N thin film coatings deposited by vacuum arc deposition, Surf. Coating. Technol., 200, 2228, 10.1016/j.surfcoat.2004.06.012
Martin, 2003, Properties of Ti1-xSixNy films deposited by concurrent cathodic arc evaporation and magnetron sputtering, Surf. Coating. Technol., 163–164, 245, 10.1016/S0257-8972(02)00491-7
Veprek, 1995, A concept for the design of novel superhard coatings, Thin Solid Films, 268, 64, 10.1016/0040-6090(95)06695-0
Erturk, 1989, Comparison of the steered arc and random arc techniques, Surf. Coating. Technol., 39–40, 455, 10.1016/S0257-8972(89)80007-6
Steffens, 1991, Reduction of droplet emission in random arc technology, Surf. Coating. Technol., 46, 65, 10.1016/0257-8972(91)90150-U
Stuber, 1999, Graded layer design for stress-reduced and strongly adherent superhard amorphous carbon films, Surf. Coating. Technol., 116–119, 591, 10.1016/S0257-8972(99)00224-8
Akari, 1990, Reduction in microparticles during the deposition of TiN films prepared by arc ion plating, Surf. Coating. Technol., 43–44, 312, 10.1016/0257-8972(90)90084-P
Sanders, 1988, Ion beam self‐sputtering using a cathodic arc ion source, J. Vac. Sci. Technol.: Vacuum, Surfaces, and Films, 6, 1929, 10.1116/1.575251
Dodonov, 1997
Vereschaka, 2017, Nano-scale multi-layered coatings for improved efficiency of ceramic cutting tools, Int. J. Adv. Manuf. Technol., 90, 27, 10.1007/s00170-016-9353-2
Grigoriev, 2017, Comparative analysis of cutting properties and nature of wear of carbide cutting tools with multi-layered nano-structured and gradient coatings produced by using of various deposition methods, Int. J. Adv. Manuf. Technol., 90, 3421, 10.1007/s00170-016-9676-z
Grigoriev, 2020, Investigation of the influence of microdroplets on the coatings nanolayer structure, Coatings, 10, 1, 10.3390/coatings10121204
Grigoriev, 2021, Investigation of the properties of the Cr,Mo-(Cr,Mo,Zr,Nb)N-(Cr,Mo,Zr,Nb,Al)N multilayer composite multicomponent coating with nanostructured wear-resistant layer, Wear, 468–469, 203597, 10.1016/j.wear.2020.203597
Grigoriev, 2020, Investigation of multicomponent nanolayer coatings based on nitrides of Cr, Mo, Zr, Nb, and Al, Surf. Coating. Technol., 401, 126258, 10.1016/j.surfcoat.2020.126258
Michalski, 1984, Structure and properties of coatings composed of TiN-Ti obtained by the reactive pulse plasma method, J. Mater. Sci. Lett., 3, 505, 10.1007/BF00720984
Metel, 2012, Characteristics of a fast neutral atom source with electrons injected into the source through its emissive grid from the vacuum chamber, Instrum. Exp. Tech., 55, 288, 10.1134/S0020441212010186
Grigoriev, 2009, Broad beam source of fast atoms produced as a result of charge exchange collisions of ions accelerated between two plasmas, Instrum. Exp. Tech., 52, 602, 10.1134/S002044120904023X
Vereschaka, 2014, Nano-scale multilayered composite coatings for cutting tools operating under heavy cutting conditions, Procedia CIRP, 14, 239, 10.1016/j.procir.2014.03.070
Vereschaka, 2014, Improving the efficiency of the cutting tool made of ceramic when machining hardened steel by applying nano-dispersed multi-layered coatings, Key Eng. Mater., 581, 68, 10.4028/www.scientific.net/KEM.581.68
Aksenov, 1983, Plasma in a stationary vacuum-arc discharge. I. Plasma flux formation, High Temp., 21, 160
Boxman, 1992, Macroparticle contamination in cathodic arc coatings: generation, transport and control, Surf. Coating. Technol., 52, 39, 10.1016/0257-8972(92)90369-L
Heberlein, 1978, vol. 165, 281
Heberlein, 1983, The interaction of vacuum arc ion currents with axial magnetic fields, IEEE Trans. Plasma Sci., 11, 152, 10.1109/TPS.1983.4316243
Martin, 1987, Characteristics of titanium arc evaporation processes, Thin Solid Films, 153, 91, 10.1016/0040-6090(87)90173-8
Coll, 1992, Diamond-like carbon films synthesized by cathodic arc evaporation, Thin Solid Films, 209, 165, 10.1016/0040-6090(92)90670-7
Plyutto, 1969, Acceleration of ions in an electron beam, Sov. Atom. Energy, 27, 1197, 10.1007/BF01164972
Seidel, 1970, Insulating properties and mechanisms of electrical breakdown in vacuum, Przeglad Elektrotechniczny, 46, 497
Daalder, 1975, 232
Mularie, W.M. U.S. Patent 4.559,125 (1985).
Daalder, 1976, Components of cathode erosion in vacuum arcs, J. Phys. Appl. Phys., 9, 2379, 10.1088/0022-3727/9/16/009
Lindfors, 1986, Cathodic arc deposition technology, Surf. Coating. Technol., 29, 275, 10.1016/0257-8972(86)90001-0
Farrall, 1975, Voltage effects of low and high current arcing on vacuum interrupter contacts, IEEE Trans. Parts, Hybrids, Packag., 11, 134, 10.1109/TPHP.1975.1135049
Gray, 1976, Electrode erosion by particle ejection in low-current arcs, J. Appl. Phys., 45, 667, 10.1063/1.1663300
Baouchi, 1991, A study of the macroparticle distribution in cathodic-arc-evaporated TiN films, Surf. Coating. Technol., 49, 253, 10.1016/0257-8972(91)90064-4
Miernik, 2000, Spatial distribution of microdroplets generated in the cathode spots of vacuum arcs, Surf. Coating. Technol., 125, 161, 10.1016/S0257-8972(99)00598-8
Sablev, 1971, Apparaturs for metal evaporating coating, U.S. Patent, 3, 793
Karpov, 1997, Cathodic arc sources and macroparticle filtering Surface and Coatings Technology, 96, 22, 10.1016/S0257-8972(98)80008-X
Grigoriev, 2012, Experimental and numerical study of the chemical composition of WSex thin films obtained by pulsed laser deposition in vacuum and in a buffer gas atmosphere, Appl. Surf. Sci., 258, 7000, 10.1016/j.apsusc.2012.03.153
Metel, 2013, Source of metal atoms and fast gas molecules for coating deposition on complex shaped dielectric products, Surf. Coating. Technol., 225, 34, 10.1016/j.surfcoat.2013.03.013
Metel, 2011, Glow discharge with electrostatic confinement of electrons in a chamber bombarded by fast electrons, Plasma Phys. Rep., 37, 628, 10.1134/S1063780X11050072
Sobol’, 2012, Effect of high-voltage pulses on the structure and properties of titanium nitride vacuum-arc coatings, Met. Sci. Heat Treat., 54, 195, 10.1007/s11041-012-9481-8
Aksenov, 1980, Motion of plasma streams from A vacuum arc in A long, straight plasma-optics system, Sov. J. Plasma Phys., 6, 504
Boxman, 1981, The interaction between plasma and microparticles in a multi-cathode-spot vacuum arc, J. Appl. Phys., 52, 151, 10.1063/1.328467
Cheng, 1997, Thermal analysis of microparticles during vacuum arc deposition of TiN, Surf. Coating. Technol., 92, 50, 10.1016/S0257-8972(97)00011-X
Deng, 2020, Physical vapor deposition technology for coated cutting tools: a review, Ceram. Int., 46, 18373, 10.1016/j.ceramint.2020.04.168
Takaki, 2013, Characteristics of amorphous carbon films prepared by hybrid RF (195kHz) plasma triggered by shunting arc discharge, Surf. Coating. Technol., 229, 26, 10.1016/j.surfcoat.2012.07.075
Lang, 2010, Study on cathode spot motion and microparticles reduction in axisymmetric magnetic field-enhanced vacuum arc deposition, Vacuum, 84, 1111, 10.1016/j.vacuum.2010.01.037
Shiravi Khoozani, 2020, Comparison of the effect of arched and through magnetic field configurations in cathodic arc deposition, Surf. Eng., 36, 547, 10.1080/02670844.2019.1653598
Zelenkov, V.V., Petrov, L.M., Plikunov, V.V.Vacuum-arc Plasma Source. Patent RU 2482217. 05/20/2013.
Wang, 2018, Influence of a scanning radial magnetic field on macroparticle reduction of arc ion-plated films, Coatings, 8, 49, 10.3390/coatings8020049
Zuo, 2019, Movement of luminous group spots on target and size modification of micro-particles during cathodic vacuum arc deposition, Vacuum, 164, 381, 10.1016/j.vacuum.2019.03.048
Lang, 2015, Investigation on behavior of macro-particles in TiN film by arc ion plating, J. Nanosci. Nanotechnol., 15, 7357, 10.1166/jnn.2015.10580
Sablev, 1976, Electric arc metal evaporator with magnetic retention of the cathode spot, PTE, 4, 247
Zhitomirsky, 2009, Vacuum arc plasma beam produced from an erbium cathode, IEEE Trans. Plasma Sci., 37, 1517, 10.1109/TPS.2009.2024671
Zhitomirsky, 2004, Influence of the aperture diameter on plasma transport through the annular anode of a vacuum arc plasma deposition system, Surf. Coating. Technol., 188–189, 220, 10.1016/j.surfcoat.2004.08.029
Aksenov, 1984, 83
Fang, 1982, Arc velocity and erosion for stainless steel and aluminum cathodes, J. Nucl. Mater., 111–112, 517, 10.1016/0022-3115(82)90258-6
Vereschaka, 2020, Investigation of the influence of the thickness of nanolayers in wear-resistant layers of Ti-TiN-(Ti,Cr,Al)N coating on destruction in the cutting and wear of carbide cutting tools, Surf. Coating. Technol., 385, 125402, 10.1016/j.surfcoat.2020.125402
Vereshchaka, 2012, Ecologically friendly dry machining by cutting tool from layered composition ceramic with nano-scale multilayered coatings, Key Eng. Mater., 496, 67, 10.4028/www.scientific.net/KEM.496.67
Vereschaka, 2019, Investigation of wear dynamics for cutting tools with multilayer composite nanostructured coatings in turning constructional steel, Wear, 420–421, 17, 10.1016/j.wear.2018.12.033
Kuzin, 2014, The role of the thermal factor in the wear mechanism of ceramic tools: Part 1, Macrolevel. J. Frict. Wear, 35, 505, 10.3103/S1068366614060099
Blinkov, 2015, Structure and phase formation in the Ti-Al-Si-N system during the growth of nanostructured arc PVD coatings, Inorg. Mater., 51, 1111, 10.1134/S0020168515100027
Keles, 1999, Optimization of arc-PVD TiN coating process parameters by Taguchi technique, Qual. Eng., 12, 29, 10.1080/08982119908962554
Håkansson, 1991, Microstructures of TiN films grown by various physical vapour deposition techniques, Surf. Coating. Technol., 48, 51, 10.1016/0257-8972(91)90128-J
Carvalho, 2003, Stress analysis and microstructure of PVD monolayer TiN and multilayer TiN/(Ti,Al)N coatings, Thin Solid Films, 429, 179, 10.1016/S0040-6090(03)00067-1
Musil, 1990, Ion-assisted sputtering of TiN films, Surf. Coating. Technol., 43–44, 259, 10.1016/0257-8972(90)90079-R
Flink, 2005, Influence of Si on the microstructure of arc evaporated (Ti,Si)N thin films; evidence for cubic solid solutions and their thermal stability, Surf. Coating. Technol., 200, 1535, 10.1016/j.surfcoat.2005.08.096
Oliver, 1992, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation, J. Mater. Res., 7, 1564, 10.1557/JMR.1992.1564
Khoroshikh, 2002, Stationary low-pressure arc discharge in plasma surface treatment systems, Thesis. Kharkov. NSC KIPT, 313
Aksonov, 1984, 57
McClure, 1974, Plasma expansion as a cause of met- al displacement in vacuum arc spots, J. Appl. Phys., 45, 2078, 10.1063/1.1663547
Aksonov, 1984, 83
Saksaganskiy, 1988, 280
1995, 742
Jüttner, 1995, Cathode spots, 73
Rakhovskiy, 1970, 536