Sources of vibration and their treatment in hydro power stations-A review
Tóm tắt
Từ khóa
Tài liệu tham khảo
Barbour, 1997, Finite element study of rotor slot designs with respect to current monitoring for detecting static air gap eccentricity in squirrel - cage induction motors, 112
Nandi, 2005, Condition monitoring and fault diagnosis of electrical motors — a review, IEEE Trans. Energy Convers., 20, 719, 10.1109/TEC.2005.847955
D. Basak, A. Tiwari, S.P. Das, Fault diagnosis and condition monitoring of electrical machines – a review, in: IEEE International Conference on Industrial Technology (ICIT 2006), Mumbai, 2006, pp. 3061–3066.
Mesa Associates, 2012, INC. and Oak Ridge National Laboratory, 1
Shreve, 2003, 1
Selak, 2014, Condition monitoring and fault diagnostics for hydro power plants, Comput. Ind., 65, 924, 10.1016/j.compind.2014.02.006
R.K. Aggarwal, Metal fatigue due to excess vibration and dynamic stresses on an hydro power station, available at <https://www.scribd.com/document/141411086/DynamicStressesHydroPowerPlantRKAggarwal/> downloaded on 3rd September, 2014.
Tavner, 2008, Review of condition monitoring of rotating electrical machines, IET Electr. Power Appl., 2, 215, 10.1049/iet-epa:20070280
Qiling, 2009, Modal analysis of hydropower house by using finite element method, 1
Wei, 2010, Vibration analysis of hydropower house based on fluid-structure coupling numerical method, Water Sci. Eng., 3, 75
Ahmad, 2007, On-line monitoring of hydro power plants in Pakistan, Inf. Technol. J., 919, 10.3923/itj.2007.919.923
Online Industrial Vibration Analysis for Predictive Maintenance and Improved Machine Reliability, available at <www.ctconline.com>, downloaded on 10th September 2014.
S.K. Singh, (Research Scholar, Dept. Of Mech. Engg., IITG), Acoustics Based Condition Monitoring, 1–07.
Morris, 2014, Condition monitoring of hydroelectric plants, 4
Mircea, 2011, Critical analysis of vibration sources of hydro aggregates in operating regime, J. Sustainable Energy, 2, 1
Wang, 2008, Vibration monitoring on electrical machine using vold-kalman filter order tracking, J. Vib. Control, 1
Xue, 2012, Automatic diagnosis method for structural fault of rotating machinery based on distinctive frequency components and support vector machines under varied operating conditions, Neuro Comput. Elsevier, 116, 326
Online Cavitations Damage, available at <www.en.wikipedia.org>, downloaded on 3rd September, 2014.
Christopher Earls Brennen, 2011
Sridharan, 2014, Mitigation of vibration on bulb turbine in small hydro electric power plants, Int. J. Eng. Technol., 5, 4968
Stack, 2003, Effects of machine speed on the development and detection of rolling element bearing faults, IEEE Power Electron. Lett., 1, 19, 10.1109/LPEL.2003.814607
Vas, 1993
Heller, 1977
Cameron, 1986, Vibration and current monitoring for detecting air gap eccentricity in large induction motors, IEE Proc. B – Electr. Power App., 133, 155, 10.1049/ip-b.1986.0022
Stein, 1999, Advanced condition monitoring of hydro generators knowledge base, Electr. Power Res. Inst., 1
Dorrell, 1995, Analysis of air gap flux, current and vibration signals as a function of the combination of static and dynamic air gap eccentricity in 3-phase induction motors, IEEE, 563
Nandi, 2001, Detection of rotor slot and other eccentricity related harmonics in a three phase induction motor with different rotor cages, IEEE Trans. Energy Convers., 16, 253, 10.1109/60.937205
Nandi, 2002, Performance analysis of a three-phase induction motor under mixed eccentricity condition, IEEE Trans. Energy Convers., 17, 392, 10.1109/TEC.2002.801995
Toliyat, 1996, A method for dynamic simulation of air-gap eccentricity in induction machines, IEEE Trans. Ind. Appl., 32, 910, 10.1109/28.511649
Cardoso, 1993, Computer-aided detection of air gap eccentricity in operating three-phase induction motors by park’s vector approach, IEEE Trans. Ind. Appl., 29, 897, 10.1109/28.245712
Al-nuaim, 1998, A novel method for modeling dynamic air-gap eccentricity in synchronous machines based on modified winding function theory, IEEE Trans. Energy Convers., 13, 156, 10.1109/60.678979
Haji, 2001, Rotor eccentricity fault detection of a DC motor, 591
Povinelli, 2002, Diagnostics of bar and end-ring connector breakage faults in polyphase induction motors through a novel dual track of time-series data mining and time-stepping coupled fe-state space modeling, IEEE Trans. Energy Convers., 17, 39, 10.1109/60.986435
Meshgin-kelk, 2003, A comprehensive method for the calculation of inductance coefficients of cage induction machines, IEEE Trans. Energy Convers., 18, 187, 10.1109/TEC.2003.811734
Obaid, 2000, A simplified technique for detecting mechanical faults using stator current in small induction motors, IEEE, 479
Electricity Engineers’ Association of New Zealand, Asset Health Indicator Guideline for Generators, (2013) 1–72.
Online Misalignment Detection, available at <http://en.wikipedia.org> downloaded on 3rdSeptember 2014.
Online Breakage of Wicket Gate Linkage, available at <www.hydroworld.com> downloaded on 3rd September 2014.
Wahl, 1994, Draft tube surging times two: the twin vortex phenomenon, Hydro Rev., 60
Khudabashev, 1961, Effect of turn short-circuits in a turbo-generator rotor on its state of vibration, ElektStantsii (Russian), 7, 40
L.T. Rosenberg, Influence of shorted turns on thermal imbalance in large generators IEEE, PES Summer Meeting, paper A78 (1978) 587–588.
Albright, 1971, Inter-turn short circuit detector for turbine generator rotor windings, IEEE Trans. Power Appl. Syst., PAS-50, 478, 10.1109/TPAS.1971.293048
Shuting, 2003, Analysis of generator vibration characteristic on rotor winding inter-turn short circuit fault, electrical machines and systems, IEEE, 882
Rongpei, 1994, Diagnosis of generator bearing vibration on rotor winding interturn short circuit fault, Therm. Power Gener., 2, 49
Yubi, 2000, Vibration analysis of shaft 10 for generator i in pingwei power plant, Electr. Power, 33, 45
Mesa Associates, INC. and Oak Ridge National Laboratory, Best Practice Catalog Penstocks and Tunnels, (2012) 1–21.
Khalturina, 1972, Vibration of the penstock at the Baiina-Bashta dam on the drin river, Hydro Tech. Constr, Netherlands, 8, 740, 10.1007/BF02377280
Bergant, 2004, Water Hammer with Column Separation : A Review of Research in the Twentieth Century, J. Fluid. Struct., 22, 135, 10.1016/j.jfluidstructs.2005.08.008
Arun Kumar (AHEC, IITR), Automation in Water Resources and Hydro power Plants, (2008) 1–71.
Pejovic, 2011, Analysis of pump-turbine ’ S ’ instability and reverse waterhammer incidents in hydro power systems, 1
Sridharan, 2013, Vibration and cavitation prediction and control of turbine alternator in hydro electric power Plants, Aust. J. Basic Appl. Sci., 7, 19
Mcstraw, 1996, Inspection of steel penstocks and pressure conduits, Facil. Instr. Stand. Tech., 2, 1
Liu, 2012, Condition monitoring system for hydro turbines based on LabVIEW, 1
P.P. Singh, S.K. Shukla, N. Pharlia, Operation & Maintenance Perspective of Hydro Electric Projects, 1–13.
Natel Energy, The hydro Engine, 1–11.
Susan-Resiga, 2006, Nennemann jet control of the draft tube vortex rope in francis turbines at partial discharge, IAHR Symp., 1, 1
Harvey, 1962, Some observations of the vortex breakdown phenomenon, J. Fluid Mech., 14, 585, 10.1017/S0022112062001470
Benjamin, 1962, Theory of the vortex breakdown phenomenon, J. Fluid Mech., 593, 10.1017/S0022112062001482
Benjamin, 1967, Some developments in the theory of vortex breakdown, J. Fluid Mech., 28, 65, 10.1017/S0022112067001909
Cassidy, 1970, Observations of unsteady flow arising after vortex breakdown, J. Fluid Mech., 41, 727, 10.1017/S0022112070000873
Arpe, 2009, Experimental evidence of hydroacoustic pressure waves in a francis turbine elbow draft tube for low discharge conditions, J. Fluids Eng., 131, 1, 10.1115/1.3155944
Ohashi, 1991
Thicke, 1981, Practical solutions for draft tube instability, Water Power Dam Constr., 33, 31
Kumar, 2010, Study of cavitation in hydro turbines — A review, Renewable Sustainable Energy Rev. Elsevier, 14, 374, 10.1016/j.rser.2009.07.024
F. Avellan, M. Farhat, Shock pressure generated by cavitation vortex collapse, in: Proceedings of the Third International Symposium on Cavitation Noise and Erosion in Fluid Systems, (1989) 119–125.
Philipp, 1998, Cavitation erosion by single laser-produced bubbles, J. Fluid Mech., 361, 75, 10.1017/S0022112098008738
Hammitt, 1979, Cavitation erosion state of art and predicting capability, Appl. Mech. Rev., 665
Arndt, 1981, Recent advances in cavitation research, Adv. Hydrosci., 12, 1, 10.1016/B978-0-12-021812-7.50006-7
Escaler, 2006, Detection of cavitation in hydraulic turbines, Mech. Syst. Signal Process., Elsevier, 20, 983, 10.1016/j.ymssp.2004.08.006
F. Avellan, P. Henry, Towards the prediction of cavitation erosion: IMHEF research program, in: Proceedings of the EPRY Symposium on Power Plant Pump, 1987, pp. 1–22.
P. Bourdon, R. Simoneau, P. Lavigne, A vibratory approach to the detection of erosive cavitation, in: Proceedings of the Third International Symposium on Cavitation Noise and Erosion in Fluid Systems, 88, 1989, pp. 103–109.
Avellan, 1988, Generation mechanism and dynamics of cavitation vortices downstream of a fixed leading edge cavity, 1
Tianhao, 2003, Study of cavitations monitoring in hydro power turbines using ultrasound, J. NDT, 25, 250
Liu, 2007, Cavitations monitoring and diagnosis of hydro power turbine on line based on vibration and ultrasound acoustic, Mach. Learn. Cybern., 19
Bajic, 2001, Intelligent cavitations diagnostics and monitoring, Int. J. Hydro Power Dams, 54, 37
Bajic, 2003, Cavitations diagnostics and monitoring, Int. J. Hydro Power Dams, 56, 32
Watanabe, 2003, Dynamics of a cavitating propeller in a water tunnel, J. Fluids Eng., 125, 283, 10.1115/1.1524588
Bansal, 1998, Fluid Mech. Hydraul. Mach., 839
Online Operation and maintenance of hydro power stations planning and management – an Indian perspective, available at <www.teriin.org>, downloaded on 10th September 2014.
Auckland, 1995, Novel approach to alternator field winding interturn fault detection, Proc. Inst. Electr. Eng.-Gen. Trans. Distrib., 142, 97, 10.1049/ip-gtd:19951712
Streifel, 1996, Detection of shorted-turns in the field winding of turbine-generator rotors using novelty detectors development and field test, IEEE Trans. Energy Convers., 11, 312, 10.1109/60.507183
Hsu, 1994, Shaft signals of salient-pole synchronous machines for eccentricity and shorted-field-coil detections, IEEE Trans. Energy Convers., 9, 572, 10.1109/60.326478
Kliman, 1996, A new approach to on-line turn fault detection in AC motors, IEEE, 1, 687
Wang, 2002, Transient behaviour of salient-pole synchronous machines with internal stator winding faults, IEEE Proc.-Electr. Power Appl., 149, 143, 10.1049/ip-epa:20020068
Neti, 2009, Stator interturn fault detection of synchronous machines using field current and rotor search-coil voltage signature analysis, IEEE Trans. Ind. Appl., 45, 911, 10.1109/TIA.2009.2018905
L. Yonggang, L. Heming, Zhaohua, H. Zili, C. Deling. A new method on inter turn short circuit fault diagnosis of steam turbine generator rotor windings, in: 15th lnternational Conference on Electrical Machines, 2002.
Maughan, 2009, Vibration detection instrumentation for turbine-generator stator endwindings, IEEE Electr. Insul. Conf., 173
Chang, 2003, A model of asynchronous machines for stator fault detection and isolation, IEEE Trans. Industr. Electron., 50, 578, 10.1109/TIE.2003.812471
Rai, 1974, Airgap eccentricity in induction motors, ERA Report, 1174
Trutt, 2001, Detection of AC machine winding deterioration using electrically excited vibrations, IEEE Trans. Ind. Appl., 37, 10, 10.1109/28.903120
Dorrell, 1997, Analysis of airgap flux, current, and vibration signals as a function of the combination of static and dynamic airgap eccentricity in 3-phase induction motors, IEEE Trans. Ind. Appl., 33, 24, 10.1109/28.567073
Thomson, 1998, On-line current monitoring and application of a finite element method to predict the level of static airgap eccentricity in three-phase induction motors, IEEE Trans. Energy Convers., 13, 347, 10.1109/60.736320
Dr. Antony Anderson, Electrical Fault and Failure Investigations online available at: <www.antony-anderson.com>, downloaded on 1st August 2014.
Online Inter Turn Fault, available at <www.wbpdclewf.org.in>, downloaded on 20thSeptember 2014.
Binns, 1973, Identification of principal factors causing imbalanced magnetic pull in cage induction motors, Proc. IEE, 120, 349
Swann, 1963, Effect of rotor eccentricity on the magnetic field in the air-gap of a non-salient-pole machine, Proc. IEE, 110, 903
Online Increases Availability in the Hydro Power Industry, available at <www.rovsing-dynamics.com>, downloaded on 1st August 2014.
B. Bajic, J. Sabolek, D.J. Dvekar, D. Magic, Vibration, Air gap and Magnetic Flux Investigation in the HPP Dubrava Bulb Unit 1, in: 4th Symposium on Power System Management, Cavtat, Croatia, 2000 and 1st International Symposium Hydroelectric Power Plants HEPP 2001,Sibenik, Croatia, 2001.
Luo, 2000, Real-time condition monitoring by significant and natural frequencies analysis of vibration signal with wavelet filter and autocorrelation enhancement, J. Sound Vib., 236, 413, 10.1006/jsvi.2000.2996
National Instruments, Lab VIEW: Getting Started with Lab VIEW, 2003.
Nord, 2005, Online Vibration Monitoring System Offers Foresight on Turbine Condition, Pulp Paper, 46
Mayes, 1994, Use of neutral networks for on-line vibration monitoring, J. Power Energy, 267, 10.1243/PIME_PROC_1994_208_047_02
Herbert, 1986, Computer techniques applied to the routine analysis of rundown vibration data for condition monitoring of turbine-alternators’, Br. J. Non-Destr. Test., 28, 371
Smart, 2000, Estimating turbogenerator foundation parameters: model selection and regularization, 1583
Saleh, 2003, Experimental investigations on induction machine condition monitoring and fault diagnosis using digital signal processing techniques, Electr. Power Syst. Res. Elsevier, 65, 197, 10.1016/S0378-7796(02)00227-4
Singh, 2004, Vibration signal analysis using wavelet transform for isolation and identification of electrical faults in induction machine, Electr. Power Syst. Res. Elsevier, 68, 119, 10.1016/S0378-7796(03)00154-8
Y. Wang, F. Sun, T. Huang, Development of on-line VCM system of hydro generators, in: Proceedings of the Third International Conference on Machine Learning and Cybernetics, 2004, pp. 1025–1029
Kunze, 2003, Condition telemonitoring and diagnosis of power plants using web technology, Prog. Nucl. Energy, Elsevier, 43, 129, 10.1016/S0149-1970(03)00019-2
B. Lloyd, Condition Monitoring of Hydro Generators, IEEE Power Engineering Society Summer Meeting, Edmonton, Alta, 2, 1999, pp. 996–998.
Pedro, 2012, Condition monitoring of wind turbines : techniques and methods, Renewable Energy, Elsevier, 46, 169, 10.1016/j.renene.2012.03.003
Entezami, 2012, Fault detection and diagnosis within a wind turbine mechanical braking system using condition monitoring, Renewable Energy, Elsevier, 47, 175, 10.1016/j.renene.2012.04.031
Bureau of Reclamation – Hydroelectric Research and Technical Services Group, Facilities Instructions 4-1A, Maintenance Scheduling for Mechanical Equipment, Denver, Colorado, 2009.
Yang, 2013, Wind turbine condition monitoring by the approach of SCADA data analysis, Renewable Energy, Elsevier, 53, 365, 10.1016/j.renene.2012.11.030
Yang, 2011, A monitoring system design in transmission lines based on wireless sensor networks, Energy Procedia, Elsevier, 12, 192, 10.1016/j.egypro.2011.10.027
Chae, 2012, Development of a wireless sensor network system for suspension bridge health monitoring, Autom. Constr., Elsevier, 21, 237, 10.1016/j.autcon.2011.06.008
Vladislavlev, 1979
Arun Dominic, 2014, Analysis of field-oriented controlled induction motor drives under sensor faults and an overview of sensorless schemes, ISA Trans., 53, 1680, 10.1016/j.isatra.2014.04.008