Some aspects of plant and research experience in the use of new high strength martensitic steel P91
Tóm tắt
Từ khóa
Tài liệu tham khảo
Middleton C, Metcalfe E. A review of laboratory Type IV cracking data in high chromium ferritic steels. In: Paper C386/027. MechE Proceedings, London, 1990.
Shibli IA, Robertson DG. Review of the use of new high strength steels in conventional and HRSG boilers: R&D and plant experience, ETD Report—No: 1045-gsp-40, October 2006.
Brett SJ, Allen DJ, Pacey J. Failure of a modified 9Cr header endplate. In: Proceedings of conference on case histories in failure investigation, Milan, September 1999. p. 873–84.
Allen DJ, Brett SJ. Premature failure of a P91 header endcap weld: minimising the risks of additional failures. In: Proceedings of conference on case histories in failure investigation, Milan, September 1999. p. 133–43.
Brett SJ, Identification of weak thick section modified 9Cr forgings in service. In: Proceedings of the Swansea creep conference; University of Swansea and EPRI, Swansea, UK, April 2001 (CD version).
Brett SJ. The creep strength of weak thick section modified 9Cr forgings. In: Proceedings of Baltica V, vol. 1, June 2001.
Brett SJ. In-Service Type IV cracking in a modified 9Cr (Grade 91) header. In: ECCC Creep Conference, London, September 05. 〈[email protected]〉.
Brett SJ. In-service failures of modified 9Cr (Grade 91) components. In: IMechE Seminar—forensic investigation of power plant failures, One Birdcage Walk, London, March 2, 2005.
Allen DJ, Harvey B, Brett SJ. FOURCRACK—An investigation of the creep performance of advanced high alloy steel welds. In: ECCC creep conference, September 2006, ETD Ltd. 〈[email protected]〉.
Chang WK, Clark RM. Hawaiian Electric Company—HECO's T91 secondary superheater tube failures investigation. In: Presented at ASME PVP conference (1996), service experience in operating fossil power plants, Publication PVP vol. 335.
Allen DJ, Fleming A. Creep performance of similar and dissimilar E911 steel weldments for advanced high temperature plant. In: Proceedings of the fifth Charles Parsons 2000 conference on ‘advance materials for 21st century turbines and power plant’, 3–7 July 2000, Churchill College, Cambridge, UK. p. 276–90.
Orr J, Buchanan LW, Everson H. The commercial development and evaluation of E911, a strong 9% CrM0NbVWN steel for boiler tubes and headers. In: Viswanathan R, Nutting J, editors. Proceedings of the conference advanced heat resistant steel for power generation. San Sabastian, Spain, London, UK: IOM Publications.
Etienne CF, Heerings JH. Evaluation of the influence of welding on creep resistance (strength reduction factor and lifetime reduction factor). IIW doc.IX01725-93, TNO, Appledoorn, The Netherlands.
Shibli IA. Creep and fatigue crack growth in P91 weldments. In: Proceedings of the Swansea creep conference, University of Swansea and EPRI, Swansea, UK, April 2001.
Shibli IA. Overview of the HIDA project. In: Proceedings of the second international HIDA conference on ‘advances in defect assessment in high temperature plant’, 4–6 October 2000, MPA, Stuttgart, Germany.
Parker JD. The creep and fracture behaviour of thick section, multi-pass weldments. In: Conference proceedings on integrity of high temperature welds. Nottingham, UK, 1998. UK: Professional Engineering Publishing.
Shibli IA, Le Mat Hamata N, Gampe U, Nikbin K. The effect of low frequency cycling on creep crack growth in welded P22 and P91 pipe tests. In: Paper S4-4. Proceedings of the second international HIDA conference on ‘advances in defect assessment in high temperature plant’, 4–6 October 2000, MPA, Stuttgart, Germany.
Le Mat Hamata N, Shibli IA. Creep crack growth of seam-welded P22 and P91 pipes with artificial—Part 2. In: Proceedings of the second international HIDA conference on ‘advances in defect assessment in high temperature plant’, 4–6 October 2000, MPA, Stuttgart, Germany.
Mohrmann R, Hollstein T, Westerheide R. Modelling of low-cycle fatigue behaviour of the steel E911. In: ‘Materials for advanced power engineering 1998’. Proceedings of the sixth Liege Conference, vol. 5, Part 1.
Bicego V, Bontempi P, Mariani R, Taylor N. Fatigue behaviour of modified 9Cr steels, base and welds’. In: ‘Materials for advanced power engineering 1998’. Proceedings of the sixth Liege conference, vol. 5, Part 1.
Tabuchi M, Watanabe T, Kubo K, Matsui M, Kinugawa J, Abe F. Creep crack growth behaviour in HAZ of weldments for W containing high Cr steel’. In: Proceedings of the second international HIDA conference on ‘advances in defect assessment in high temperature plant’, 4–6 October 2000, MPA, Stuttgart, Germany.
Wachter O, Ennis PJ. Investigation of the properties of the 9% Cr steel of the type 9Cr–0.5Mo–1.8W–V–Nb with respect to its application as a pipework and boiler steel operating at elevated temperatures. PhD thesis, Research Centre Julich, Germany, March 1995.
Knodler R, Ennis P. Oxidation of high strength ferritic steels in steam at 650°C: preliminary results of COST 522 projects. In: Proceedings of Baltica V, vol. 1, June 2001.
Ennis PJ, Quadakkers WJ. 9–12% Cr steels: application limits and potential for further development. In: Proceedings of the fifth Charles Parsons conference on ‘advanced materials for 21st century turbines and power plant’, Churchill College, Cambridge, UK, 3–7 July 2000. London: Institute of Materials.
Hald J. Microstructure and long-term creep properties of 9–12% Cr steels. In: ECCC creep conference, September 2006, ETD Ltd. 〈[email protected]〉, 〈www.etd1.co.uk〉.
Fleming A, Maskell RV, Buchanan LW, Wilson T. Materials development for supercritical boiler and pipework. In: Proceedings of the conference on ‘materials for high temperature power generation and process plant applications’, Materials Congress 1998. London, UK: IOM Publications.