Some High-Pressure, High-Temperature Apparatus Design Considerations: Equipment for Use at 100 000 Atmospheres and 3000°C

Review of Scientific Instruments - Tập 29 Số 4 - Trang 267-275 - 1958
H. Tracy Hall1
1Brigham Young University, Provo, Utah

Tóm tắt

Three items of equipment are described in detail; (1) A simple-piston and cylinder device capable of generating pressures to 50 000 atmospheres simultaneously with temperatures of 5000°C, (2) a tetrahedral-anvil device that has been successfully tested at 100 000 atmospheres and 3000°C, and (3) a stepped-piston device capable of developing pressures to 200 000 atmospheres at room temperature. In addition consideration is given to such problems as (a) geometrical elements of design, (b) higher strength materials, (c) use of mechanical anisotropy in design, (d) electrical leads, (e) thermal and electrical insulation, (f) solid pressure transmitting media, (g) binding rings, (h) internal generation of pressure, (i) multistaging, and (j) calibration.

Từ khóa


Tài liệu tham khảo

1956, Am. J. Sci., 254, 722, 10.2475/ajs.254.12.722

1888, Proc. Roy. Soc. (London), 44, 320

1919, Trans. Roy. Soc. (London), 220A, 67

1909, Engineering, 87, 425

1952, Proc. Am. Acad. Arts Sci., 81, 165, 10.2307/20023677

1955, J. Phys. Chem., 59, 1144, 10.1021/j150533a006

1957, J. Geol., 65, 334, 10.1086/626433

1957, J. Chem. Phys., 26, 956

1950, Proc. Roy. Soc. (London), A203, 1

1957, Bull. Am. Phys. Soc., 2, 7

Thông tin
Thông tin xuất bản

Review of Scientific Instruments

Tập 29 Số 4

267-275

Thông tin tác giả