Solvothermal synthesis of Na2Ti3O7 nanowires embedded in 3D graphene networks as an anode for high-performance sodium-ion batteries

Dunn, 2011, Electrical energy storage for the grid: A battery of choices, Science, 334, 928, 10.1126/science.1212741 Armand, 2008, Building better batteries, Nature, 451, 652, 10.1038/451652a Tarascon, 2010, Is lithium the new gold?, Nat. Chem., 2, 510, 10.1038/nchem.680 Slater, 2013, Sodium-ion batteries, Adv. Funct. Mater., 23, 947, 10.1002/adfm.201200691 Palomares, 2012, Na-ion batteries, recent advances and present challenges to become low cost energy storage systems, Energy Environ. Sci., 5, 5884, 10.1039/c2ee02781j Yabuuchi, 2014, Research development on sodium-ion batteries, Chem. Rev., 114, 11636, 10.1021/cr500192f Tepavcevic, 2012, Nanostructured bilayered vanadium oxide electrodes for rechargeable sodium-ion batteries, ACS Nano, 6, 530, 10.1021/nn203869a Barpanda, 2010, Structural transport, and electrochemical investigation of novel AMSO4F (A=Na, Li; M=Fe, Co, Ni, Mn) metal fluorosulphates prepared using low temperature synthesis routes, Inorg. Chem., 49, 7401, 10.1021/ic100583f Moreau, 2010, Structure and stability of sodium intercalated phases in olivine FePO4, Chem. Mater., 22, 4126, 10.1021/cm101377h Zhang, 2015, Ultrafast high-volumetric sodium storage of folded-graphene electrodes through surface-induced redox reactions, Energy Storage Materials, 1, 112, 10.1016/j.ensm.2015.08.006 Zhang, 2016, Commercial carbon molecular sieves as a high performance anode for sodium-ion batteries, Energy Storage Materials, 3, 18, 10.1016/j.ensm.2015.12.004 Shirpour, 2013, New materials based on a layered sodium titanate for dual electrochemical Na and Li intercalation systems, Energy Environ. Sci., 6, 2538, 10.1039/c3ee41037d Seshadri, 2014, Electrochemical properties of electrodes derived from NaTi3O6OH·2H2O in sodium and lithium cells, J. Electrochem. Soc., 162, A52, 10.1149/2.0391501jes Tran, 2015, An electrochemical study of Fe1.18Sb1.82 as negative electrode for sodium ion batteries, Electrochim. Acta, 182, 11, 10.1016/j.electacta.2015.09.021 Wu, 2015, Synthesizing porous NaTi2(PO4)3 nanoparticles embedded in 3D graphene networks for high-rate and long cycle-life sodium electrodes, ACS Nano, 9, 6610, 10.1021/acsnano.5b02787 Komaba, 2011, Electrochemical Na insertion and solid electrolyte interphase for hard-carbon electrodes and application to Na-ion batteries, Adv. Funct. Mater., 21, 3859, 10.1002/adfm.201100854 Ding, 2015, Electrochemical performance of hard carbon negative electrodes for ionic liquid-based sodium ion batteries over a wide temperature range, Electrochim. Acta, 176, 344, 10.1016/j.electacta.2015.07.024 Kim, 2015, Carbon-coated Li4Ti5O12 nanowires showing high rate capability as an anode material for rechargeable sodium batteries, Nano Energy, 12, 725, 10.1016/j.nanoen.2015.01.034 Ge, 2014, Copper-doped Li4Ti5O12/carbon nanofiber composites as anode for high-performance sodium-ion batteries, J. Power Sources, 272, 860, 10.1016/j.jpowsour.2014.08.131 Qu, 2014, Layered SnS2-reduced graphene oxide composite-a high-capacity high-rate, and long-cycle life sodium-ion battery anode material, Adv. Mater., 26, 3854, 10.1002/adma.201306314 Huang, 2013, Electrochemical sodium storage of TiO2(B) nanotubes for sodium ion batteries, RSC Adv., 3, 12593, 10.1039/c3ra42413h Yang, 2015, TiO2/carbon hollow spheres as anode materials for advanced sodium ion batteries, Electrochim. Acta, 178, 871, 10.1016/j.electacta.2015.08.051 Eguia-Barrio, 2015, Structure of H2Ti3O7 and its evolution during sodium insertion as anode for Na ion batteries, Phys. Chem. Chem. Phys., 17, 6988, 10.1039/C4CP03345K Senguttuvan, 2011, Na2Ti3O7: Lowest voltage ever reported oxide insertion electrode for sodium ion batteries, Chem. Mater., 23, 4109, 10.1021/cm202076g Pan, 2013, Sodium storage and transport properties in layered Na2Ti3O7 for room-temperature sodium-ion batteries, Adv. Energy Mater., 3, 1186, 10.1002/aenm.201300139 Wang, 2013, Microspheric Na2Ti3O7 consisting of tiny nanotubes: An anode material for sodium-ion batteries with ultrafast charge-discharge rates, Nanoscale, 5, 594, 10.1039/C2NR32661B Rudola, 2013, Na2Ti3O7: An intercalation based anode for sodium-ion battery applications, J. Mater. Chem. A, 1, 2653, 10.1039/c2ta01057g Wang, 2013, Single crystalline Na2Ti3O7 rods as an anode material for sodium-ion batteries, RSC Adv., 3, 1041, 10.1039/C2RA22050D Zhang, 2014, Three-dimensional spider-web architecture assembled from Na2Ti3O7 nanotubes as a high performance anode for a sodium-ion battery, Chem. Commun., 50, 14029, 10.1039/C4CC06451H Xu, 2014, Understanding Na2Ti3O7 as an ultra-low voltage anode material for a Na-ion battery, Chem. Commun., 50, 12564, 10.1039/C4CC03973D Yan, 2015, A tightly integrated sodium titanate-carbon composite as an anode material for rechargeable sodium ion batteries, J. Power Sources, 274, 8, 10.1016/j.jpowsour.2014.10.045 Fei, 2013, Reduced graphene oxide wrapped FeS nanocomposite for lithium-ion battery anode with improved performance, ACS Appl. Mater. Interfaces, 5, 5330, 10.1021/am401239f Chen, 2011, Graphene-encapsulated hollow Fe3O4 nanoparticle aggregates as a high-performance anode material for lithium ion batteries, ACS Appl. Mater. Interfaces, 3, 3078, 10.1021/am200592r Nithya, 2014, rGO/nano Sb composite: A high performance anode material for Na+ ion batteries and evidence for the formation of nanoribbons from the nano rGO sheet during galvanostatic cycling, J. Mater. Chem. A, 2, 10516, 10.1039/C4TA01324G Cha, 2014, Nitrogen-doped open pore channeled graphene facilitating electrochemical performance of TiO2 nanoparticles as an anode material for sodium ion batteries, J. Mater. Chem. A, 2, 5182, 10.1039/C4TA00041B Li, 2014, Assembly of MnO2 nanowires@reduced graphene oxide hybrid with an interconnected structure for a high performance lithium ion battery, RSC Adv., 4, 54416, 10.1039/C4RA10338F Zhang, 2015, MgFe2O4/reduced graphene oxide composites as high-performance anode materials for sodium ion batteries, Electrochim. Acta, 180, 616, 10.1016/j.electacta.2015.09.002 Wang, 2013, Reduced graphene oxide with superior cycling stability and rate capability for sodium storage, Carbon, 57, 202, 10.1016/j.carbon.2013.01.064 Becerril, 2008, Evaluation of solution-processed reduced graphene oxide films as transparent conductors, ACS Nano, 2, 463, 10.1021/nn700375n Kolen'ko, 2006, Hydrothermal synthesis and characterization of nanorods of various titanates and titanium dioxide, J. Phys. Chem. B, 110, 4030, 10.1021/jp055687u Shen, 2012, Hydrogenated Li4Ti5O12 nanowire arrays for high rate lithium ion batteries, Adv. Mater., 24, 6502, 10.1002/adma.201203151 Miyamoto, 2004, Visible light induced electron transfer and long-lived charge separated state in cyanine dye/layered titanate intercalation compounds, J. Phys. Chem. B, 108, 4268, 10.1021/jp035617s Cheng, 2015, Enhanced cycling performances of hollow Sn compared to solid Sn in Na-ion battery, Electrochim. Acta, 180, 227, 10.1016/j.electacta.2015.08.125 Senguttuvan, 2013, Low-potential sodium insertion in a NASICON-type structure through the Ti(III)/Ti(II) redox couple, J. Am. Chem. Soc., 135, 3897, 10.1021/ja311044t Rousse, 2013, Rationalization of intercalation potential and redox mechanism for A2Ti3O7(A=Li, Na), Chem. Mater., 25, 4946, 10.1021/cm4032336 Muñoz-Márquez, 2015, Composition and evolution of the solid-electrolyte interphase in Na2Ti3O7 electrodes for Na-ion batteries: XPS and Auger parameter analysis, ACS Appl. Mater. Interfaces, 7, 7801, 10.1021/acsami.5b01375 Hu, 2014, Fabrication of 3D hierarchical MoS2/polyaniline and MoS2/C architectures for lithium-ion battery applications, ACS Appl. Mater. Interfaces, 6, 14644, 10.1021/am503995s