Solid state sintering and consolidation of Al powders and Al matrix composites

Allison, 1993, Metal–matrix composites in the automotive industry: opportunities and challenges, JOM, 45, 19, 10.1007/BF03223361 Narula, 1996, Advanced materials for automobiles, CHEMTECH, 26, 48 Neubing, 1987, Sintering of aluminum parts: the state-of-the-art, Metal Powder Report, 42, 354 Kehl, 1980, Liquid phase sintering of Al–Cu compacts, Powder Metallurgy, 23, 113, 10.1179/pom.1980.23.3.113 Chawla, 1998, Effect of SiC volume fraction and particle size on the fatigue resistance of a 2080 Al/SiCp composite, Metallurgical and Materials Transactions A, 29A, 2843, 10.1007/s11661-998-0325-5 Chawla, 2000, The effect of matrix microstructure on the tensile and fatigue behavior of SiC particle reinforced 2080 Al matrix composites, Metallurgical and Materials Transactions A, 31A, 531, 10.1007/s11661-000-0288-7 Private communication with Rohith Shivanath of Stackpole Limited, July 2001 I.E. Anderson, J.C. Foley, J.F. Flumerfelt, Simplified aluminum powder metal processing routes for automotive applications, in: W.F. Jandeska, R.A. Chernenkoff (Eds.), Proceedings of the First International Conference on Powder Metallurgy Aluminum & Light Alloys for Automotive Applications, MPIF, Princeton, NJ, 1998, pp. 75 Anderson, 2001, Determining the role of surfaces and interfaces in the powder metallurgy processing of aluminum alloy powders, Surface and Interface Analysis, 31, 599, 10.1002/sia.1087 Thomas, 1986, Consolidation and properties of thermally stable Al–Cr–Zr alloys produced by rapid solidification, 337 Hatch, 1984 M. Jacobson, A.R. Cooper, J. Nagy, Explosivity of Metal Powders, Bureau of Mines, report No. 6516, US Department of the Interior: US Government Publication, Washington, DC, 1964 Unpublished data from John Wright, ALPOCO, Limited, November 2000, J.W. Wright, Aluminum Powder-Hazardous or Not, in: R.A. Chernenkoff, W.F. Jandeska Jr. (Eds.), Proceedings of the Second International Conference on Powder Metallurgy of Aluminum & Light Alloys for Automotive Applications, MPIF, Princeton, NJ, 2000, pp. 41–50 J.C. Foley, D.K. Rehbein, D.J. Barnard, Investigation of the Sintering Processing Using Non-contact Electromagnetic Acoustic Transducers, Advances in Powder Metallurgy & Particulate Materials 2001, in: Proceedings of the 2001 International Conference on Powder Metallurgy and Particulate Materials held on May 13–17, 2001, in New Orleans, Louisiana, sponsored by the MPIF/APMI, pp. 11.26–11.40 G.B. Schaeffer, B.J. Hall, Sintering of Aluminum in Argon and Nitrogen, Advances in Powder Metallurgy & Particulate Materials 2002, in: Proceedings of the 2002 International Conference on Powder Metallurgy and Particulate Materials held on June 16–21, 2002, in Orlando, Florida, sponsored by the MPIF/APMI, pp. 13.139–13.149 J.F. Flumerfelt, Aluminum Powder Metallurgy Processing, Ph.D. Thesis, Iowa State University, 1998 J.E. Shield, A.I. Goldman, I.E. Anderson, T.W. Ellis, R.W. MeCallum, D.J. Sordelet, US Patent no. 5,433,978, July 18, 1995 S.B. Biner, Development of Quasicrystal Reinforced Aluminum Composites for Industrial Applications, Final Report to Center for Advanced Technology Development of Iowa State University, July 1996 J.E. Davidson, Compressibility of metal powders, Powder Metallurgy, ninth edition, in: Metals Handbook, Vol. 7, American Society for Metals, p. 287 ASTM E-8 Standard, ASTM 03.01, 1990, p. 130 Levi, 1982, Microstructures of rapidly solidified aluminum alloy submicron powders, Metallurgical Transactions A, 13, 13, 10.1007/BF02642411 Kovacs-Csetenyi, 1998, Effect of grain size on tensile stress and ductility in Al99.99, Physica Status Solidi (a), 166, 166, 10.1002/(SICI)1521-396X(199804)166:2<805::AID-PSSA805>3.0.CO;2-L German, 1996 J.C. Foley, D.J. Barnard, Simplified powder metallurgy processing of Al–8Fe–4Ce alloys, Advances in Powder Metallurgy & Particulate Materials 2002, in: Proceedings of the 2002 International Conference on Powder Metallurgy and Particulate Materials held on June 16–21, 2002, in Orlando, Florida, sponsored by the MPIF/APMI, pp. 1.103–1.114 Ushino, 1991, Impurity diffusion of three radioactive isotopes of Cu in Al, Keikinzoku/Journal of Japan Institute of Light Metals, 41, 433, 10.2464/jilm.41.433 Galle, 2000, Diffusion in icosahedral Al–Pd–Mn quasicrystals: temperature and pressure dependence, Materials Science and Engineering A, 294–296, 693, 10.1016/S0921-5093(00)01145-X Khoukaz, 2000, Diffusion of 57Co in decagonal Al–Ni–Co-quasicrystals, Materials Science and Engineering A, 294–296, 697, 10.1016/S0921-5093(00)01149-7 Flumerfelt, 1997, Consolidation of pure aluminum powders, P/M aluminum/mechanical alloying, Parts 10 & 11, 11 Raybould, 1988, Forming of rapidly solidified elevated temperature aluminum alloys produced by planar flow casting, 199 Ackermann, 1985, Study of water desorption during degassing of aluminium powders, 175 F. Tang, I.E. Anderson, S.B. Biner, Microstructure and mechanical properties of pure Al matrix composites reinforced by Al–Cu–Fe alloy particles, Materials Science and Engineering A, submitted