SnS nanoparticles anchored on Ti3C2 nanosheets matrix via electrostatic attraction method as novel anode for lithium ion batteries

Chemical Engineering Journal - Tập 357 - Trang 150-158 - 2019
Jinjin Ai1,2, Yike Lei1,2, Shuai Yang1,2, Chunyan Lai1,2, Qunjie Xu1,2
1Shanghai Key Laboratory of Materials Protection and Advanced Materials in Electric Power, Shanghai, China
2Shanghai University of Electric Power, Shanghai, China

Tóm tắt

Từ khóa


Tài liệu tham khảo

Poizot, 2000, Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries, Nature, 407, 496, 10.1038/35035045

Tian, 2017, Two-dimensional SnS: a phosphorene analogue with strong in-plane electronic anisotropy, ACS. nano, 11, 2219, 10.1021/acsnano.6b08704

Liu, 2018, Confining SnS2 ultrathin nanosheets in hollow carbon nanostructures for efficient capacitive sodium storage, Joule, 2, 725, 10.1016/j.joule.2018.01.004

Xiong, 2017, SnS nanoparticles electrostatically anchored on three-dimensional N-doped graphene as an active and durable anode for sodium-ion batteries, Energy. Environ. Sci., 10, 1757, 10.1039/C7EE01628J

Tu, 2017, A few-layer SnS2/reduced graphene oxide sandwich hybrid for efficient sodium storage, J. Phys. Chem. C., 121, 3261, 10.1021/acs.jpcc.6b12692

Chao, 2016, Array of nanosheets render ultrafast and high-capacity Na-ion storage by tunable pseudocapacitance, Nat. Commun., 7, 12122, 10.1038/ncomms12122

Koteeswara Reddy, 2015, Review on Tin (II) Sulfide (SnS) material: synthesis, properties, and applications, Crit. Rev. Solid. State., 40, 359, 10.1080/10408436.2015.1053601

Li, 2006, Nanoscale SnS with and without carbon-coatings as an anode material for lithium ion batteries, Electrochim. Acta., 52, 1383, 10.1016/j.electacta.2006.07.041

Li, 2006, Mechanochemical synthesis and electrochemical properties of nanosized SnS as an anode material for lithium ion batteries, Mater. Sci. Eng. B., 128, 75, 10.1016/j.mseb.2005.11.017

Zhou, 2012, Self-assembled nanocomposite of silicon nanoparticles encapsulated in graphene through electrostatic attraction for lithium-ion batteries, Adv. Energy. Mater., 2, 1086, 10.1002/aenm.201200158

Gnana Kumar, 2012, Synthesis and electrochemical properties of SnS as possible anode material for lithium batteries, J. Phys. Chem. Solids., 73, 1187, 10.1016/j.jpcs.2012.04.013

Pan, 2017, MoS 2 encapsulated SnO 2 -SnS/C nanosheets as a high performance anode material for lithium ion batteries, Chem. Eng. J., 316, 393, 10.1016/j.cej.2017.01.111

Wu, 2013, A Sn–SnS–C nanocomposite as anode host materials for Na-ion batteries, J. Mater. Chem. A., 1, 7181, 10.1039/c3ta10920h

Zhou, 2010, Synthesis of graphene/polyaniline composite nanosheets mediated by polymerized ionic liquid, Chem. Commun., 46, 3663, 10.1039/c0cc00049c

Zhu, 2015, A General Strategy to Fabricate Carbon-Coated 3D Porous Interconnected Metal Sulfides: Case Study of SnS/C Nanocomposite for High-Performance Lithium and Sodium Ion Batteries, Adv. Sci., 2, 1500200, 10.1002/advs.201500200

Yin, 2012, SnS2@reduced graphene oxide nanocomposites as anode materials with high capacity for rechargeable lithium ion batteries, J. Mater. Chem., 22, 23963, 10.1039/c2jm35137d

Cai, 2012, Porous SnS nanorods/carbon hybrid materials as highly stable and high capacity anode for Li-ion batteries, ACS. Appl. Mater. Inter., 4, 4093, 10.1021/am300873n

Derrien, 2007, Nanostructured Sn–C composite as an advanced anode material in high-performance lithium-ion batteries, Adv. Mater., 19, 2336, 10.1002/adma.200700748

Liu, 2016, Sandwich-like SnS/polypyrrole ultrathin nanosheets as high-performance anode materials for Li-Ion batteries, ACS. Appl. Mater. Inter., 8, 8502, 10.1021/acsami.6b00627

Chen, 2017, Single nozzle electrospinning synthesized MoO2@C core shell nanofibers with high capacity and long-term stability for lithium-ion storage, Adv. Mater. Inter., 4, 1600816, 10.1002/admi.201600816

Sher Shah, 2017, Highly interdigitated and porous architected ternary composite of SnS2, g-C3N4, and reduced graphene oxide (rGO) as high performance lithium ion battery anodes, RSC. Adv., 7, 3125, 10.1039/C6RA25886G

Naguib, 2013, New two-dimensional niobium and vanadium carbides as promising materials for Li-ion batteries, J. Am. Chem. Soc., 135, 15966, 10.1021/ja405735d

Naguib, 2014, Synthesis of two-dimensional materials by selective extraction, Accounts. Chem. Res., 48, 128, 10.1021/ar500346b

Hou, 2014, N-doped graphene/porous g-C3N4 nanosheets supported layered-MoS2 hybrid as robust anode materials for lithium-ion batteries, Nano Energy, 8, 157, 10.1016/j.nanoen.2014.06.003

Zhao, 2016, SnO2 quantum Dots@Graphene oxide as a high-rate and long-life anode material for lithium-ion batteries, Small, 12, 588, 10.1002/smll.201502183

Naguib, 2011, Two-dimensional nanocrystals produced by exfoliation of Ti3AlC2, Adv. Mater., 23, 4248, 10.1002/adma.201102306

Anasori, 2017, 2D metal carbides and nitrides (MXenes) for energy storage, Nat. Rev. Mater., 2, 16098, 10.1038/natrevmats.2016.98

Mashtalir, 2013, Intercalation and delamination of layered carbides and carbonitrides, Nat. Commun., 4, 1716, 10.1038/ncomms2664

Naguib, 2014, One-step synthesis of nanocrystalline transition metal oxides on thin sheets of disordered graphitic carbon by oxidation of MXenes, Chem. Commun., 50, 7420, 10.1039/C4CC01646G

Rakhi, 2015, Effect of postetch annealing gas composition on the structural and electrochemical properties of Ti2CTx MXene electrodes for supercapacitor applications, Chem. Mater., 27, 5314, 10.1021/acs.chemmater.5b01623

Shahzad, 2016, Electromagnetic interference shielding with 2D transition metal carbides (MXenes), Science, 353, 1137, 10.1126/science.aag2421

Sun, 2014, Two-dimensional Ti3C2 as anode material for Li-ion batteries, Electrochem. Commun., 47, 80, 10.1016/j.elecom.2014.07.026

Sun, 2018, Two-dimensional MXenes for energy storage, Chem. Eng J., 338, 27, 10.1016/j.cej.2017.12.155

Ahmed, 2016, H2O2 assisted room temperature oxidation of Ti2C MXene for Li-ion battery anodes, Nanoscale, 8, 7580, 10.1039/C6NR00002A

Armand, 2009, Conjugated dicarboxylate anodes for Li-ion batteries, Nat. Mater., 8, 120, 10.1038/nmat2372

Ahmed, 2017, Atomic layer deposition of SnO2 on MXene for Li-ion battery anodes, Nano Energy, 34, 249, 10.1016/j.nanoen.2017.02.043

Luo, 2016, Sn(4)(+) Ion decorated highly conductive Ti3C2 MXene: promising lithium-ion anodes with enhanced volumetric capacity and cyclic performance, ACS nano, 10, 2491, 10.1021/acsnano.5b07333

Chen, 2006, One-step preparation and characterization of PDDA-protected gold nanoparticles, Polymer, 47, 763, 10.1016/j.polymer.2005.11.034

Lian, 2017, Alkalized Ti3C2 MXene nanoribbons with expanded interlayer spacing for high-capacity sodium and potassium ion batteries, Nano Energy, 40, 1, 10.1016/j.nanoen.2017.08.002

Wang, 2015, Sulfur atoms bridging few-layered MoS2with S-doped graphene enable highly robust anode for lithium-ion batteries, Adv. Energy. Mater., 5, 1501106, 10.1002/aenm.201501106

Liang, 2015, Sulfur cathodes based on conductive MXene nanosheets for high-performance lithium-sulfur batteries, Angew. Chem., 54, 3907, 10.1002/anie.201410174

Zhao, 2015, Significant impact of 2D graphene nanosheets on large volume change tin-based anodes in lithium-ion batteries: A review, J. Power Sources., 274, 869, 10.1016/j.jpowsour.2014.10.008

Vaughn, 2012, Formation of SnS nanoflowers for lithium ion batteries, Chem. Commun., 48, 5608, 10.1039/c2cc32033a

Liu, 2017, Encapsulation of NiO nanoparticles in mesoporous carbon nanospheres for advanced energy storage, Chem. Eng. J., 308, 240, 10.1016/j.cej.2016.09.061

Tang, 2012, Are MXenes promising anode materials for Li ion batteries? Computational studies on electronic properties and Li storage capability of Ti3C2 and Ti3C2X2 (X = F, OH) monolayer, J. Am. Chem. Soc., 134, 16909, 10.1021/ja308463r

Xiong, 2013, A modified LiF coating process to enhance the electrochemical performance characteristics of LiNi0.8Co0.1Mn0.1O2 cathode materials, Mater. Lett., 110, 4, 10.1016/j.matlet.2013.07.098

Xiong, 2014, Surface modification of LiNi0.8Co0.1Mn0.1O2 with conducting polypyrrole, J. Solid. State. Electr., 18, 2619, 10.1007/s10008-014-2519-7