Single-shot explosive welding technique for the fabrication of multilayered metal base composites: effect of welding parameters leading to optimum bonding condition

Blazynski, 1989, Implosively manufactured composite multilayered foil cylinders and tubular transition joint, Mat.-wiss. u. Werkstofftech., 20, 262, 10.1002/mawe.19890200804 Chiba, 1989, Effect of heat treatment on tensile strength of explosively-welded maraging steel/Al and maraging steel/Ti multilayered composites, J. Japan Inst. Metals, 53, 1268, 10.2320/jinstmet1952.53.12_1268 Friedrich, 1974, The influence of brittle boundary layers on the strength of fibrous metallic composites, J. Mater. Sci., 9, 1191, 10.1007/BF00540539 Hokamoto, 1988, An analysis of multilayered explosive bonding process, Mem. Faculty Eng., Kumamoto Univ., 33, 95 Hokamoto, 1993, New explosive welding technique to weld aluminum alloy and stainless steel plates using a stainless steel intermediate plate, Metall. Trans. A, 24A, 2289, 10.1007/BF02648602 Mileiko, 1969, The tensile strength and ductility of continuous fibre composites, J. Mater. Sci., 4, 974, 10.1007/BF00555312 Ochiai, 1980, Simple and modified rule of mixtures of deformation parameters in stage III of single ductile fibre-ductile matrix composites, J. Mater. Sci., 15, 1790, 10.1007/BF00550599 Salem, 1981, Interfacial wave generation in explosive welding of multilaminates, 1003 Shoukry, 1988, Manufacturing of multiclads using a single explosive charge, Propellants, Explosives, Pyrotechnics, 13, 144, 10.1002/prep.19880130504