Single and multi-objective optimization of steel moment-resisting frame buildings under vehicle impact using evolutionary algorithms
Tóm tắt
Từ khóa
Tài liệu tham khảo
Kaveh A, Mahdipour Moghanni R, Javadi SM (2019) Optimum design of large steel skeletal structures using chaotic firefly optimization algorithm based on the Gaussian map. Struct Multidiscip Optim 60(3):879–894. https://doi.org/10.1007/s00158-019-02263-1
Kaveh A, Mahdipour Moghanni R, Javadi SM (2021) Chaotic optimization algorithm for performance-based optimization design of composite moment frames. Eng Comput. https://doi.org/10.1007/s00366-020-01244-z
Kaveh A, Seddighian MR, Ghanadpour E (2020) Black Hole Mechanics Optimization: a novel meta-heuristic algorithm. Asian J Civ Eng 21:1129–1149. https://doi.org/10.1007/s42107-020-00282-8
Shahrouzi M, Farah-Abadi H (2018) Optimal seismic design of steel moment frames by un-damped multi-objective vibrating particles system. Asian J Civ Eng 19:877–891. https://doi.org/10.1007/s42107-018-0070-z
Kaveh A, Ilchi GM (2015) A comparative study of CBO and ECBO for optimal design of skeletal structures. Comput Struct 153:137–147. https://doi.org/10.1016/j.compstruc.2015.02.028
Kaveh A, Bijari S (2017) Bandwidth, profile and wave front optimization using PSO, CBO, ECBO and TWO algorithms. Iran J Sci Technol Trans Civ Eng 41:1–12. https://doi.org/10.1007/s40996-016-0026-z
Jarrahi H, Asadi A, Khatibinia M, Etedali S (2020) Optimal design of rotational friction dampers for improving seismic performance of inelastic structures. J Build Eng. https://doi.org/10.1016/j.jobe.2019.100960
Mehdizadeh K, Karamodin A, Sadeghi A (2020) Progressive sidesway collapse analysis of steel moment-resisting frames under earthquake excitations. Iran J Sci Technol Trans Civ Eng 44:1209–1221. https://doi.org/10.1007/s40996-020-00374-0
Sil A, Phukan D (2019) Quantification and analysis of air blast load propagation characteristics on structures. J Build Rehabil. https://doi.org/10.1007/s41024-019-0063-7
Elmagbool MMG, Muniraj K, Parthiban P et al (2021) Study the progressive collapse analysis of shear wall-framed building for different soil profile types SC, SD. J Build Rehabil. https://doi.org/10.1007/s41024-021-00109-2
Kim J, Kang H (2015) Progressive collapse of steel moment frames subjected to vehicle impact. J Perform Constr Facil. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000665
Kang H, Kim J (2017) Response of a steel column-footing connection subjected to vehicle impact. Struct Eng Mech 63:125–136. https://doi.org/10.12989/sem.2017.63.1.125
Kim B, Tse KT, Chen Z, Seon Park H (2020) Multi-objective optimization of a structural link for a linked tall building system. J Build Eng. https://doi.org/10.1016/j.jobe.2020.101382
Kaveh A, Kalateh-Ahani M, Fahimi-Farzam M (2014) Life-cycle cost optimization of steel moment-frame structures: performance-based seismic design approach. Earthq Struct 7(3):271–294. https://doi.org/10.12989/EAS.2014.7.3.271
Carbas S (2016) Design optimization of steel frames using an enhanced firefly algorithm. Eng Optim 48(12):2007–2025. https://doi.org/10.1080/0305215X.2016.1145217
Ha MH, Vu QA, Truong VH (2018) Optimum design of stay cables of steel cable-stayed bridges using nonlinear inelastic analysis and genetic algorithm. Structures 16:288–302. https://doi.org/10.1016/j.istruc.2018.10.007
Khaledy N, Habibi A, Memarzadeh P (2019) Multi-objective optimisation of steel moment frames subjected to blast. Int J Struct Eng. https://doi.org/10.1504/IJSTRUCTE.2019.101436
Gholizadeh S, Fattahi F (2019) Multi-objective design optimization of steel moment frames considering seismic collapse safety. Eng Comput. https://doi.org/10.1007/s00366-019-00886-y
Arroyo O, Osorio AV, Vargas MC (2019) A method to improve the seismic performance of steel moment resisting frames based on eigen frequency optimization. Adv Civ Eng. https://doi.org/10.1155/2019/8385342
Moradpour S, Dehestani M (2019) Optimal DDBD procedure for designing steel structures with nonlinear fluid viscous dampers. Structures 22:154–174. https://doi.org/10.1016/j.istruc.2019.08.005
Kaveh A, Kabir MZ, Bohlool M (2020) Optimum design of three-dimensional steel frames with prismatic and non-prismatic elements. Eng Comput 36:1011–1027. https://doi.org/10.1007/s00366-019-00746-9
Kaveh A, Biabani Hamedani K, Hosseini SM, Bakhshpoori T (2020) Optimal design of planar steel frame structures utilizing meta-heuristic optimization algorithms. Structures 25:335–346. https://doi.org/10.1016/j.istruc.2020.03.032
Bakhshinezhad S, Mohebbi M (2020) Multi-objective optimal design of semi-active fluid viscous dampers for nonlinear structures using NSGA-II. Structures 24:678–689. https://doi.org/10.1016/j.istruc.2020.02.004
Sadeghi A, Kazemi H, Samadi M (2021) Probabilistic seismic analysis of steel moment-resisting frame structure including a damaged column. Structures 33:187–200. https://doi.org/10.1016/j.istruc.2021.03.065
American Institute of Steel Construction (AISC) (2001) Manual of steel construction-allowable stress design, 9th edn. American Institute of Steel Construction, Chicago
OpenSees, Open System for Earthquake Engineering Simulation Manual (2007) Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA. http://opensees.berkeley.edu
Kennedy J, Eberhart R (1995) Particle swarm optimization. In: Proceeding of IEEE international conference on neural networks 4(27):1942–1948. https://doi.org/10.1109/ICNN.1995.488968
Kaveh A, Talaei AS, Nasrollahi A (2016) Application of probabilistic particle swarm in optimal design of large-span prestressed concrete slabs. Iran J Sci Technol Trans Civ Eng 40:33–40. https://doi.org/10.1007/s40996-016-0005-4
Rajeev S, Krishnamoorthy CS (1992) Discrete optimization of structures using genetic algorithms. J Struct Eng 118:1233–1250. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:5(1233)
Erbatur F, Hasançebi O, Tütünçü I, Kiliç H (2000) Optimal design of planar and space structures with genetic algorithms. Comput Struct 75:209–224. https://doi.org/10.1016/S0045-7949(99)00084-X
Kripakaran P, Hall B, Gupta A (2011) A genetic algorithm for design of moment-resisting steel frames. Struct Multidiscip Optim 44:559–574. https://doi.org/10.1007/s00158-011-0654-7
Torregosa RF, Kanok-Nukulchai W (2002) Weight optimization of steel frames using genetic algorithm. Adv Struct Eng 5(2):99–111. https://doi.org/10.1260/1369433021502597
Mirjalili S, Lewis A (2016) The whale optimization algorithm. Adv Eng Softw 95:51–67. https://doi.org/10.1016/j.advengsoft.2016.01.008
Yang X-S, Deb S (2009) Cuckoo search via Le´vy flights. IEEE 210–214. https://doi.org/10.1109/NABIC.2009.5393690
Yang X-S, Deb S (2013) Multi objective cuckoo search for design optimization. Computers & Operations Research 40(6):1616–1624. https://doi.org/10.1016/j.cor.2011.09.026
Etedali S, Rakhshani H (2018) Optimum design of tuned mass dampers using multi-objective cuckoo search for buildings under seismic excitations. Alex Eng J 57(4):3205–3218. https://doi.org/10.1016/j.aej.2018.01.009
Etedali S, Akbari M, Seifi M (2019) MOCS-based optimum design of TMD and FTMD for tall buildings under near-field earthquakes including SSI effects. Soil Dyn Earthq Eng 119:36–50. https://doi.org/10.1016/j.soildyn.2018.12.027
Javidan MM, Kang H, Isobe D, Kim J (2018) Computationally efficient framework for probabilistic collapse analysis of structures under extreme actions. Eng Struct 17:440–452. https://doi.org/10.1016/j.engstruct.2018.06.022
Dumonteil P (1992) Simple equations for effective length factors. Eng J AISC 29(3):111–115
HAZUS-National Institute of Building Sciences (1995) Development of a Standardized Earthquake Loss Estimation Methodology, Federal Emergency Management Agency, Washington D.C., USA
Kim J, Park J, Lee T (2011) Sensitivity analysis of steel buildings subjected to column loss. Eng Struct 33:421–432. https://doi.org/10.1016/j.engstruct.2010.10.025
Kazemzadeh Azad S, Hasançebi O, Kazemzadeh AS (2013) Upper bound strategy for metaheuristic based design optimization of steel frames. Adv Eng Softw 57:19–32. https://doi.org/10.1016/j.advengsoft.2012.11.016
Kazemzadeh AS (2018) Seeding the initial population with feasible solutions in metaheuristic optimization of steel trusses. Eng Optim 50(1):89–105. https://doi.org/10.1080/0305215X.2017.1284833
Eurocode 1 (2006) Actions on structures—Part 1–7: general actions—accidental actions
Mujeeb M, Pasupuleti VDK, Dongre A (2020) Effect of vehicle impact on reinforced concrete structures. In: Subramaniam K, Khan M (eds) Advances in structural engineering. Lecture notes in civil engineering, 74. Springer, Singapore. https://doi.org/10.1007/978-981-15-4079-0_17
Mestrovic D, Cizmar D, Miculinic L (2008) Reliability of concrete columns under vehicle impact. J WIT Trans Built Environ 98:157–165. https://doi.org/10.2495/SU080161
Ellingwood B, Galambos TV, MacGregor JG, Cornell CA (1980) Development of a probability based load criterion for American National Standard A58—building code requirement for minimum design loads in buildings and other structures, Washington, DC: National Bureau of Standards, Dept. of Commerce
Pouraminian M, Pourbakhshian S (2019) Multi-criteria shape optimization of open-spandrel concrete arch bridges: pareto front development and decision-making. World J Eng 16(5):670–680. https://doi.org/10.1108/WJE-04-2019-0104