Simultaneous mercury capture and silver leaching using Ag2S-bearing ores and residues
Tóm tắt
Since mercury is chemically similar to silver, it tends to dissolve along with the silver and gold during cyanide leaching. Ultimately, mercury is recovered along with the silver as mercury/silver/gold amalgam, which requires retorting to remove the mercury prior to refining the silver and gold. A possible approach to separating mercury from silver and gold in cyanide leach solutions is to take advantage of the replacement reaction between [Hg(CN)4]2− and Ag2S, which results in precipitation of mercury as HgS while dissolving silver as [Ag(CN)2]− Results are presented demonstrating that mercury can be removed from cyanide solutions with high effectiveness while, at the same time, recovering additional silver in solution. Initial experiments with static flasks in the laboratory showed a high degree of mercury removal could be achieved. Results using actual metallurgical plant products in bottle roll tests indicate the process works on a larger scale, but also results in significant gold losses if the solution being treated has high gold levels, such as carbon stripping pregnant eluent solution.
Tài liệu tham khảo
Bale, C.W., Pelton, A.D., Thompson, W.T., Eriksson, G., Hack, K., Chartrand, P., Decterov, S., Jung, I-H., Melancon, J., and Peterson, S., 2010, Factsage 6.2, Thermochemical Calculation Package, Thermfact and GTT Technologies.
Bucknam, C. and McComb M., 2007, “Study of stability of mercury and silver polythiocarbonate nanofilms generated during optimized mercury removal from cyanidation pregnant eluate,” SME Annual Meeting, Denver, CO.
Bunney, K., Jeffrey, M.I., Pleysier, R., and Breuer, P. L., 2010, “Selective Elution of Gold, Silver, and Mercury Cyanide from Activated Carbon,” Minerals and Metallurgical Processing, Vol. 27, No. 4, pp. 205–211.
Gabby, K.L. and Eisele, T.C., 2013, “Selective Removal of Mercury using Zinc Sulfide,” Minerals and Metallurgical Processing Journal, 30, 2:91–94.
Grosse, A.C., Dicinoski, G. W., Shaw M.J., and Haddad, P.R., 2003, “Leaching and recovery of gold using ammoniacal thiosulfate leach liquors (a review),” Hydrometallurgy, 69: 1–21.
Matlock, M.M., Howerton, B.S., Robertson, J.D., and Atwood, D.A., 2002, “Gold ore column studies with new mercury precipitant,” Industrial and Engineering Chemistry Research, 41: 5278–5282.
Misra, M., Lorengo, J., Nanor, J.B., and Bucknam, C.B., 1998, “Removal of mercury cyanide species from solutions using dimethyl dithiocarbamates,” Minerals & Metallurgical Processing, Vol. 15, 4:60.
Oraby, E.A., Jeffrey, M.I., and Browner, R.E., 2010, “The Deportment of Mercury During Thiosulfate Leaching and Resin-in-Pulp Recovery of Gold from Ores” Minerals and Metallurgical Processing, Vol. 27, No. 4, pp. 184–189.
Pai, P., Niemi, D., and Powers, B., 2000, “North American inventory of anthropogenic mercury emissions,” Fuel Processing Technology 65–66; 101–115.
Ravichandran, M., 2004, “Interactions between mercury and dissolved organic matter — a review,” Chemosphere, 55: 319–331.
Washburn, C. and Hill, E., 2003, “Mercury retorts for the processing of precious metals and hazardous wastes,” Precious Metals: Pyrometallurgy 45–50.