Silica fume as porogent agent in geo-materials at low temperature

Journal of the European Ceramic Society - Tập 30 Số 7 - Trang 1641-1648 - 2010
Elodie Prud’Homme1, P. Michaud1, Emmanuel Joussein2, Claire Peyratout1, Agnès Smith1, Judit Ovádi3, P Marion3, Sylvie Rossignol1
1Groupe d’Etude des Matériaux Hétérogènes (GEMH-ENSCI) Ecole Nationale Supérieure de Céramique Industrielle, 47-73 Avenue Albert Thomas, 87065 Limoges, France
2GRESE, EA 3040, 123 avenue Albert Thomas, 87060 Limoges, France
3Laboratoire de Catalyse en Chimie Organique (LACCO), Université de Poitiers, UMR CNRS 6503, 40 Avenue du Recteur Pineau, 86022 Poitiers Cedex, France

Tóm tắt

Từ khóa


Tài liệu tham khảo

Davidovits, 2008

H. Xu, Geopolymerisation of aluminosilicate minerals, PhD thesis, Department of Chemical Engineering, University of Melbourne, Australia; 2001.

Grutzeck, 1997, Zeolites synthesised from class F fly ash and sodium aluminate slurry, J Am Ceram Soc, 80, 2449, 10.1111/j.1151-2916.1997.tb03143.x

Li, 2005, Short fiber reinforced geopolymer composites manufactured by extrusion, J Mater Civil Eng, 17, 624, 10.1061/(ASCE)0899-1561(2005)17:6(624)

Wu, 2007, Mechanical properties of a foamed glass ceramic material produced from silicate waste, Eur J Glass Sci Technol A, 48, 133

Barbosa, 2003, Synthesis and thermal behaviour of potassium sialate, Mater Lett, 57, 1477, 10.1016/S0167-577X(02)01009-1

Fletcher, 2005, The composition range of aluminosilicate geopolymers, J Eur Ceram Soc, 25, 1471, 10.1016/j.jeurceramsoc.2004.06.001

Bell, 2009, Preparation of ceramic foams from metakaolin-based geopolymer gels, Ceram Eng Sci Proc, 29, 97

Jettner, 2007, Structure of kaoline-alumina based foam for high temperature applications, J Eur Ceram Soc, 27, 1435, 10.1016/j.jeurceramsoc.2006.04.029

Fernandes, 2009, Preparation and characterization of foams from sheet glass and fly ash using carbonates as foaming agents, Ceram Int, 35, 229, 10.1016/j.ceramint.2007.10.019

Duxson, 2006, Thermal conductivity of metakaolin geopolymers used as a first approximation for determining gel interconnectivity, Ind Eng Chem Res, 45, 7781, 10.1021/ie060187o

Nair, 2007, Geopolymer matrices with improved hydrothermal corrosion resistance for high temperature applications, J Mater Sci, 42, 3083, 10.1007/s10853-006-0526-5

Phair, 2002, Effect of the silicate activator pH on the microstructural characteristics of waste based geopolymers, Int J Miner Process, 66, 121, 10.1016/S0301-7516(02)00013-3

Kirshner, 2004, Investigation of geopolymer bonders with respect to their application for building materials, Ceramics – Silikáty, 48, 117

Yunsheng, 2008, Impact properties of geoplymer based extrudated incorporated with fly ash and PVA short fiber, Constr Build Mater, 22, 370, 10.1016/j.conbuildmat.2006.08.006

Michot, 2008, Thermal conductivity and specific heat of kaolinite: evolution with thermal treatment, J Eur Ceram Soc, 28, 2639, 10.1016/j.jeurceramsoc.2008.04.007

J. Davidovits. Synthetic mineral polymer compound of the silicoaluminates family and preparation process, US Patent, 4,472,199;1984.

Innocenzi, 2003, Infrared spectroscopy of sol–gel derived silica-based films: a spectra-microstructure overview, J Non-Cryst Solids, 316, 309, 10.1016/S0022-3093(02)01637-X

Criado, 2005, Alkali activation of fly ashes. Part 1. Effect of curing conditions on the carbonation of the reaction products, Fuel, 84, 2048, 10.1016/j.fuel.2005.03.030

Davidovits, 2008, Scientific tools, X-rays, FTIR, NMR, Geopolym: Chem Appl, 61

Lee, 2003, Use of infrared spectroscopy to study geopolymerization of heterogeneous amorphous aluminosilicate, Langmuir, 19, 8726, 10.1021/la026127e

Rees, 2007, Attenuated total reflectance Fourier transform infrared analysis of fly ash geopolymer gel aging, Langmuir, 23, 8170, 10.1021/la700713g

Duxson, 2006, Thermal evolution of metakaolin geopolymer. Part 1. Physical evolution, J Non-Cryst Solids, 352, 5541, 10.1016/j.jnoncrysol.2006.09.019

Uchino, 1989, Attenuated total reflectance Fourier-transform infrared spectra of a hydrated sodium silicate glass, J Am Ceram Soc, 72, 2173, 10.1111/j.1151-2916.1989.tb06051.x

Breck, 1974

Binner, 2009, Processing of ceramic metal interpenetrating composites, J Eur Ceram Soc, 29, 837, 10.1016/j.jeurceramsoc.2008.07.034

Jim, 2009, Control of pore size in ceramic foams: influence of surfactant concentration, Mater Chem Phys, 113, 441, 10.1016/j.matchemphys.2008.07.099

Prud’homme E. , Michaud P., Joussein E., Peyratout C., Smith A., Rossignol S.; in preparation.