Significant improvement of the thermal stability and electrochemical corrosion resistance of the Au/Pd surface finish through catalytic modification

Wu, 2008, Surface finish effects on high-speed signal degradation, IEEE Trans. Adv. Packag., 31, 182, 10.1109/TADVP.2007.914962 Fan, 2010, Signal integrity design for high-speed digital circuits: progress and directions, IEEE Trans. Electromagn. Compat., 52, 392, 10.1109/TEMC.2010.2045381 Wu, 2010, Influence of palladium thickness on the soldering reactions between Sn-3Ag-0.5Cu and Au/Pd(P)/Ni(P) surface finish, J. Electron. Mater., 39, 2387, 10.1007/s11664-010-1351-9 Won, 2010, The pH effect on black spots in surface finish: electroless nickel immersion gold, Appl. Surf. Sci., 257, 56, 10.1016/j.apsusc.2010.06.033 Suganuma, 2008, The root causes of the “black pad” phenomenon and avoidance tactics, JOM, 60, 61, 10.1007/s11837-008-0074-3 Zeng, 2006, The root cause of black pad failure of solder joints with electroless Ni/immersion gold plating, JOM, 58, 75, 10.1007/s11837-006-0187-5 Li, 2014, Amorphous Pd layer as a highly effective oxidation barrier for surface finish of electronic terminals, Corros. Sci., 83, 419, 10.1016/j.corsci.2014.02.006 Zeng, 2005, Kirkendall void formation in eutectic SnPb solder joints on bare Cu and its effect on joint reliability, J. Appl. Phys., 97, 10.1063/1.1839637 Ho, 2012, Inhibiting the growth of Cu3Sn and Kirkendall voids in the Cu/Sn-Ag-Cu system by minor Pd alloying, Electron. Mater. Lett., 8, 495, 10.1007/s13391-012-2049-3 Lee, 2016, Comparative study between Au/Pd/Cu and Au/Pd(P)/Cu films in soldering applications, Surf. Coat. Technol., 303, 103, 10.1016/j.surfcoat.2016.03.070 Ho, 2014, Pronounced effects of Ni(P) thickness on the interfacial reaction and high impact resistance of the solder/Au/Pd(P)/Ni(P)/Cu reactive system, Surf. Coat. Technol., 259, 244, 10.1016/j.surfcoat.2014.04.027 Ho, 2012, Development and evaluation of direct deposition of Au/Pd(P) bilayers over Cu pads in soldering applications, J. Electron. Mater., 41, 3276, 10.1007/s11664-012-2200-9 Ho, 2015, Interfacial reaction and mechanical characterization of Sn-Ag-Cu/Au/Pd(P)/Cu solder joints: thick Pd(P) deposition, J. Electron. Mater., 44, 568, 10.1007/s11664-014-3513-7 Ho, 2018, High-temperature stability of Au/Pd/Cu and Au/Pd(P)/Cu surface finishes, Appl. Surf. Sci., 303, 1353, 10.1016/j.apsusc.2017.11.247 Boehm, 2002, Surface oxides on carbon and their analysis: a critical assessment, Carbon, 40, 145, 10.1016/S0008-6223(01)00165-8 Zhang, 2012, Highly stable copper oxide composite as an effective photocathode for water splitting via a facile electrochemical synthesis strategy, J. Mater. Chem., 22, 2456, 10.1039/C1JM14478B Suh, 1988, High-temperature thermal expansion of six metallic elements measured by dilatation method and X-ray diffraction, J. Electron. Mater., 23, 757 Tunell, 1935, Geometrical and optical properties, and crystal structure of tenorite, Z. Kristallogr. Cryst. Mater., 90, 120, 10.1524/zkri.1935.90.1.120 Villars, 1997 Chakraborty, 2010, Mechanisms of interdiffusion in Pd-Cu thin film diffusion couples, Thin Solid Films, 518, 2010, 10.1016/j.tsf.2009.08.026 Kuru, 2008, Interdiffusion and stress development in Cu-Pd thin film diffusion couples, Thin Solid Films, 516, 7615, 10.1016/j.tsf.2008.05.011 Tolla, 2015, Reactivity of no-clean flux residues in electronic assemblies: a systematic study, SMTAI Wu, 2006, Electrochemical corrosion study of Pb-free solders, J. Mater. Res., 21, 62, 10.1557/jmr.2006.0035 Madram, 2012, Study of the corrosion behavior of electrodeposited Ni-P and Ni-P-C nanocomposite coatings in 1 M NaOH, Electrochim. Acta, 85, 263, 10.1016/j.electacta.2012.08.061 Yuan, 2011, Superhydrophobic fluoropolymer-modified copper surface via surface graft polymerisation for corrosion protection, Corros. Sci., 53, 2738, 10.1016/j.corsci.2011.05.008 Yu, 2002, Plasma-polymerized thiophene films for corrosion protection in microelectronic devices, J. Mater. Sci. Lett., 21, 951, 10.1023/A:1016081908498 Nam, 2014, Effect of Pd interlayer on electrochemical properties of ENIG surface finish in 3.5 wt.% NaCl solution, J. Electron. Mater., 43, 3307, 10.1007/s11664-014-3203-5 Harrington, 2009, Relation between the semiconducting properties of a passive film and reduction reaction rates, J. Electrochem. Soc., 156, C154, 10.1149/1.3077576