Signal processing methods to improve the Signal-to-noise ratio (SNR) in ultrasonic non-destructive testing of wind turbine blade

Katunin, 2015, Damage identification in aircraft composite structures: A case study using various non-destructive testing techniques, Composite Structures, 127, 1, 10.1016/j.compstruct.2015.02.080

Tiwari, K.A.and Raisutis, R., 2016. Comparative analysis of non-contact ultrasonic methods for defect estimation of composites in remote areas. CBU International Conference Proceedings, 4, 846.

Varghese, 1996, Order selection criteria for detecting mean scatterer spacings with the AR model, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 43, 979, 10.1109/58.535502

Abbate, 1997, Signal detection and noise suppression using a wavelet transform signal processor: application to ultrasonic flaw detection, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 44, 14, 10.1109/58.585186

Shankar, 1989, Split-spectrum processing: analysis of polarity threshold algorithm for improvement of signal-to-noise ratio and detectability in ultrasonic signals, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 36, 101, 10.1109/58.16976

Mallett, 2007, Analysis of cross-correlation and wavelet de-noising for the reduction of the effects of dispersion in long-range ultrasonic testing, Insight - Non-Destructive Testing and Condition Monitoring, 49, 350, 10.1784/insi.2007.49.6.350

Bouden, T. et al., 2009. Signal processing methods for materials defects detection. 2009 IEEE International Ultrasonics Symposium.

Iyer, 2012, Ultrasonic signal processing methods for detection of defects in concrete pipes, Automation in Construction, 22, 135, 10.1016/j.autcon.2011.06.012

Raišutis, 2008, A comparative study of time-frequency analysis techniques in the case of signal processing for ultrasonic NDT, Insight - Non-Destructive Testing and Condition Monitoring, 50, 628, 10.1784/insi.2008.50.11.628

Drewry, 2007, A review of NDT techniques for wind turbines, Insight - Non-Destructive Testing and Condition Monitoring, 49, 137, 10.1784/insi.2007.49.3.137

Juengert, A. and Grosse, C.U., 2009. Inspection techniques for wind turbine blades using ultrasound and sound waves. Proceedings of non-destructive testing in Civil Engineering, Nantes, France.

Schmidt, 2012, Monitoring of multiaxial fatigue damage evolution in impacted composite tubes using non-destructive evaluation, Composites Part A: Applied Science and Manufacturing, 43, 537, 10.1016/j.compositesa.2011.12.002

Tippmann, J.D., Manohar, A. & Lanza di Scalea, F., 2012. Wind turbine inspection tests at UCSD M. Tomizuka, C.-B. Yun, & J. P. Lynch, eds. Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2012.

Amenabar, 2011, Comparison and analysis of non-destructive testing techniques suitable for delamination inspection in wind turbine blades, Composites Part B: Engineering, 42, 1298, 10.1016/j.compositesb.2011.01.025

Lambert, 2012, 3D damage characterisation and the role of voids in the fatigue of wind turbine blade materials, Composites Science and Technology, 72, 337, 10.1016/j.compscitech.2011.11.023

Parent, 2011, Anti-icing and de-icing techniques for wind turbines: Critical review, Cold Regions Science and Technology, 65, 88, 10.1016/j.coldregions.2010.01.005

Virk, 2010, Effect of Rime Ice Accretion on Aerodynamic Characteristics of Wind Turbine Blade Profiles, Wind Engineering, 34, 207, 10.1260/0309-524X.34.2.207

Diamanti, 2005, Non-destructive inspection of sandwich and repaired composite laminated structures, Composites Science and Technology, 65, 2059, 10.1016/j.compscitech.2005.04.010

Raišutis, 2016, Ultrasonic NDT of wind turbine blades using guided waves. Ultragarsas”, Ultrasound", 63, 7

Rao, 2007

Lee, 2010, Ultrasonic Propagation Imaging for Wind Turbine Blade Quality Evaluation, Advanced Materials Research, 123-125, 847, 10.4028/www.scientific.net/AMR.123-125.847

Ye, G., Neal, B., Boot, A., Kappatos, V., Selcuk, C. and Gan, T.H., 2014. Development of an ultrasonic ndt system for automated in-situ inspection of wind turbine blades. In EWSHM-7th European Workshop on Structural Health Monitoring.

Steigmann, 2016, Wind Turbine Blade Composites Assessment Using Non-Contact Ultrasound Method, Journal of Clean Energy Technologies, 4, 440, 10.18178/JOCET.2016.4.6.328

Gómez Muñoz, 2016, A New Fault Location Approach for Acoustic Emission Techniques in Wind Turbines, Energies, 9, 40, 10.3390/en9010040

Vladišauskas, 2009, Application of ultrasonic transducers for investigation of composite materials. Ultragarsas”, Ultrasound", 64, 36

Vladišauskas, 2010, Contact ultrasonic transducers for mechanical scanning systems, Ultragarsas”, Ultrasound", 65, 30

Vladišauskas, 2010, Development of the non-damped wide-band ultrasonic transducers. Ultragarsas”, Ultrasound", 65, 40

Su, 2006, Guided Lamb waves for identification of damage in composite structures: A review, Journal of sound and vibration, 295, 753, 10.1016/j.jsv.2006.01.020

Alleyne, 1991, A two-dimensional Fourier transform method for the measurement of propagating multimode signals, The Journal of the Acoustical Society of America, 89, 1159, 10.1121/1.400530

Oppenheim, 1989, 66

Huang, 1998, March, The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis. In Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, 454, 903

Li, 2013, Research on Ultrasonic Testing of Coarse-Grain Materials with Hilbert-Huang Transform, Advanced Materials Research, 820, 97, 10.4028/www.scientific.net/AMR.820.97

Liu, 2015, Application of Hilbert–Huang transform for defect recognition in pulsed eddy current testing, Nondestructive Testing and Evaluation, 30, 233, 10.1080/10589759.2015.1034715

Huang, S. and Wang, S., 2016. The Electromagnetic Ultrasonic Guided Wave Testing. Springer Series in Measurement Science and Technology, pp.1–40.

Kažys, 2008, Ultrasonic detection of defects in strongly attenuating structures using the Hilbert–Huang transform, NDT & E International, 41, 457, 10.1016/j.ndteint.2008.03.006

Rodrı́guez, 2004, Ultrasonic flaw detection in NDE of highly scattering materials using wavelet and Wigner–Ville transform processing, Ultrasonics, 42, 847, 10.1016/j.ultras.2004.01.063

Vermaak, H., Nsengiyumva, P. & Luwes, N., 2016. Using the Dual-Tree Complex Wavelet Transform for Improved Fabric Defect Detection. Journal of Sensors, 1–8.

Yu, G. and Wang, X., 2016. Ultrasonic signal processing using wavelet transform for automatic rail defect detection. Proceedings of the 2016 International Forum on Management, Education and Information Technology Application.

Mallat, 1989

Lazaro, 2002, Influence of thresholding procedures in ultrasonic grain noise reduction using wavelets, Ultrasonics, 40, 263, 10.1016/S0041-624X(02)00149-X