Sheared edge extension of high-strength cold-rolled steels

J. D. Grazier:J. of Mater., 1972, vol. 7, p. 3.

K. Matsudo. T. Shimomura, K. Osawa, M. Yoshida, and Y. Uchida:Nippon Kokan Tech. Rep. Overseas, 1974, no. 18, p. 1.

T. Matsuoka, T. Kawai, Y. Hobo, and S. Ueda:Trans. ISIJ, 1975, vol. 15, p. 137.

T. Yanaguchi and H. Taniguchi:Nippon Kokan Tech. Rep., 1969, vol. 45, p. 23.

D. K. Uko, R. Sowerby, and J. L. Duncan:Can. Min. Metall. Bull., 1977, vol. 70, p. 127.

R. R. Hilsen, T. E. Fine, and G. J. Hansen:Microalloying ’75, Union Carbide Corp., New York, NY, 1977, p. 654.

T. R. Thomson and A. Brownrigg:Metals Forum, 1979, vol. 2, p. 118.

R. D. Adamczyk, D. W. Dickinson, and R. P. Krupitzer: SAE Technical Paper No. 830237, 1983.

R. R. Pradhan and E. D. Melcher:Mechanical Working and Steel Processing Conference XXII, Iron and Steel Society of AIME, Warrendale, PA, 1980, p. 34.

A.J. Klein and E. W. Hitchler:Metals Eng. Quart., 1973, vol. 13, p. 25.

R.G. Davies:J. Appl. Metalwork., 1983, vol. 2, p. 293.

M. Korchynsky and H. Sturat:Symposium Low Alloy High Strength Steels, Frese-Druck, Dusseldorf, 1970, p. 17.

S.P. Keeler:Automotive Sheet Metal Formability, Report on AISI Project No. 1201-409, June 1978, p. 41.

H.P. Weaver and K.J. Weinmann:J. Appl. Metalwork., 1985, vol. 3, p. 381.

H.P. Weaver and K.J. Weinmann:J. Appl. Metalwork., 1985, vol. 3, p. 391.

W. F. Hosford and R. M. Caddell:Metal Forming—Mechanics and Metallurgy, Prentice-Hall, Englewood Cliffs, NJ, 1983, p. 294.

Y. C. Liu:Metall. Trans. A, 1983, vol. 14A, p. 1199.