Shear Strengthening of RC Deep Beam Using Externally Bonded GFRP Fabrics

Journal of The Institution of Engineers (India): Series A - Tập 99 - Trang 341-350 - 2018
A. Kumari1, S. S. Patel1, A. N. Nayak1
1Department of Civil Engineering, Veer Surendra Sai University of Technology Burla, Sambalpur, India

Tóm tắt

This work presents the experimental investigation of RC deep beams wrapped with externally bonded Glass Fibre Reinforced Polymer (GFRP) fabrics in order to study the Load versus deflection behavior, cracking pattern, failure modes and ultimate shear strength. A total number of five deep beams have been casted, which is designed with conventional steel reinforcement as per IS: 456 (Indian standard plain and reinforced concrete—code for practice, Bureau of Indian Standards, New Delhi, 2000). The spans to depth ratio for all RC deep beams have been kept less than 2 as per the above specification. Out of five RC deep beams, one without retrofitting serves as a reference beam and the rest four have been wrapped with GFRP fabrics in multiple layers and tested with two point loading condition. The first cracking load, ultimate load and the shear contribution of GFRP to the deep beams have been observed. A critical discussion is made with respect to the enhancement of the strength, behaviour and performance of retrofitted deep beams in comparison to the deep beam without GFRP in order to explore the potential use of GFRP for strengthening the RC deep beams. Test results have demonstrated that the deep beams retrofitted with GFRP shows a slower development of the diagonal cracks and improves shear carrying capacity of the RC deep beam. A comparative study of the experimental results with the theoretical ones predicted by various researchers available in the literatures has also been presented. It is observed that the ultimate load of the beams retrofitted with GFRP fabrics increases with increase of number of GFRP layers up to a specific number of layers, i.e. 3 layers, beyond which it decreases.

Tài liệu tham khảo

IS: 456, Indian standard plain and reinforced concrete—code for practice (Bureau of Indian Standards, New Delhi, 2000)

K. Uji, Trans. Jpn. Concr. Inst. 14(253), 253–266 (1992)

M.J. Chajes, T.F. Januszka, D.R. Mertz, T.A. Thomson, W.W. Finch, ACI Struct. J. 92(3), 295–303 (1995)

O. Challal, M.J. Nollet, D. Perraton, J. Compos. Constr. 2(2), 111–113 (1998)

A. Khalifa, W.J. Gold, A. Nanni, A.A. MI, J. Compos. Constr. 2(4), 195–202 (1998)

Y. Mitsui, K. Murakami, K. Takeda, H. Sakai, Compos. Interfaces 5(4), 285–295 (1997)

T. Triantafillou, ACI Struct. J. 95(2), 107–115 (1998)

F. Watanabe, J.Y. Lee, Struct. J. 95(6), 749–757 (1998)

A. Khalifa, A. Nanni, Cem. Concr. Compos. 22(3), 165–174 (2000)

B. Taljsten, L. Elfgren, Compos. Part B Eng. 3(2), 87–96 (2000)

T.C. Triantafillou, C.P. Antonopoulos, J. Compos. Constr. 4(4), 198–205 (2000)

A. Li, C. Diagana, Y. Delmas, Eng. Struct. 23(10), 1212–1220 (2001)

J.F. Chen, J.G. Teng, Constr. Build. Mater. 17(1), 27–41 (2003)

C. Diagana, A. Li, B. Gedalia, Y. Delmas, Eng. Struct. 25, 507–516 (2003)

B. Taljsten, Constr. Build. Mater. 17(1), 15–26 (2003)

B.B. Adhikary, H. Mutsuyoshi, J. Compos. Constr. 8(3), 258–264 (2004)

B.B. Adhikary, H. Mutsuyoshi, M. Ashraf, Struct. J. 101(5), 660–668 (2004)

A. Bousselham, O. Chaallal, Struct. J. 101(2), 219–227 (2004)

C. Deniaud, J.R. Cheng, J. Compos. Constr. 8(5), 425–433 (2004)

S.Y. Cao, J.F. Chen, J.G. Teng, Z. Hao, J. Chen, J. Compos. Constr. 9(5), 417–428 (2005)

Z. Zhang, C.T.T. Hsu, J. Compos. Constr. 9(2), 158–169 (2005)

A.S. Mosallam, S. Banerjee, Compos. Part B Eng. 38(5), 781–793 (2007)

E. Grande, M. Imbimbo, A. Rasulo, J. Compos. Constr. 13(5), 405–414 (2009)

G.M. Chen, J.G. Teng, J.F. Chen, J. Compos. Constr. 17(1), 50–66 (2012)

A. Mofidi, O. Chaallal, J. Compos. Constr. 15(1), 62–74 (2012)

Y. Zhou, M. Gou, F. Zhang, S. Zhang, D. Wang, Mater. Des. 50, 130–139 (2013)

R.A. Hawileh, H.A. Rasheed, J.A. Abdalla, A.K. Al-Tamimi, Mater. Des. 53, 972–982 (2014)

D. Baggio, K. Soudki, M. Noel, Constr. Build. Mater. 66, 634–644 (2014)

T. Skuturna, J. Valivonis, Constr. Build. Mater. 50, 577–583 (2014)

A.K. El-Sayed, Compos. Part B Eng. 58, 422–429 (2014)

Z.C. Tetta, L.N. Koutas, D.A. Bournas, Compos. Part B Eng. 77, 338–348 (2015)

Z. Zhang, C. Hsu, J. Moren, J. Compos. Constr. 8(5), 403–414 (2004)

M. Islam, M. Mansur, M. Maalej, Cem. Concr. Compos. 27(3), 413–420 (2005)

S. Park, R.S. Aboutaha, J. Struct. Eng. 135(6), 632–643 (2009)

H.K. Lee, S.H. Cheong, S.K. Ha, C.G. Lee, Compos. Struct. 93(2), 911–922 (2011)

ACI Committee 318 (American Concrete Institute, Detroit, MI, 1999)

ACI Committee 440.2R-08 (American Concrete Institute, Farmington Hills, MI, 2002)

M. Panjehpour, K.C. Hwa, Yen, L.V. Sci. World J. 2014, 1–9 (2014)

M.A. Javed, M. Irfan, S. Khalid, Y. Chen, S. Ahmed, KSCE J. Civ. Eng. 20(7), 1–9 (2016)

T.E. Maaddawy, S. Sherif, Compos. Struct. 89(1), 60–69 (2009)

R.A. Hawileh, T.A. El-Maaddawy, Z.N. Mohammad, Mater. Des. 42, 378–387 (2012)

T. Maeda, Y. Asano, Y. Sato, T. Ueda, Y. Kakuta, in Proceedings of the Third Symposium, vol. 1 (1997), pp. 279–286

T.C. Triantafillou, in Proceedings of the Third Symposium, vol. 1 (1997), pp. 523–530

IS: 10262, Indian standard concrete mix proportioning—guidelines (Bureau of Indian Standards, New Delhi, 2009)

Thông tin
Thông tin xuất bản

Journal of The Institution of Engineers (India): Series A

Tập 99

341-350

Thông tin tác giả