Severe plastic deformation (SPD) processes for metals
Tóm tắt
Từ khóa
Tài liệu tham khảo
Valiev, 2000, Bulk Nanostructured Materials from Severe Plastic Deformation, Progress in Materials Science, 45, 103, 10.1016/S0079-6425(99)00007-9
Valiev, 1993, Structure and Properties of Ultrafine-grained Materials Produced by Severe Plastic Deformation, Materials Science and Engineering A, 168, 141, 10.1016/0921-5093(93)90717-S
Rosochowski, 2004, Metal Forming Technology for Producing Bulk Nanostructured Metals, Steel Grips, 2, 35
Rosochowski, 2005, Processing Metals by Severe Plastic Deformation, Solid State Phenomena, 101–102, 13, 10.4028/www.scientific.net/SSP.101-102.13
2005, 503
Azushima, 2003, Trend of Ultrafine grained steel, 53
Tsuji, 2003, ARB (accumulative roll-bonding) and Other New Techniques to Produce Bulk Ultrafine Grained Materials, Advanced Engineering Materials, 5, 338, 10.1002/adem.200310077
Segal, 2002, Severe Plastic Deformation: Simple Shear Versus Pure Shear, Materials Science and Engineering A, 338, 331, 10.1016/S0921-5093(02)00066-7
Valiev, 2006, Producing Bulk Ultrafine-grained Materials by Severe Plastic Deformation, JOM, 58, 33, 10.1007/s11837-006-0213-7
Valiev, 2006, Principles of Equal-channel Angular Pressing as a Processing Tool for Grain Refinement, Progress in Materials Science, 51, 881, 10.1016/j.pmatsci.2006.02.003
Azushima, 2000, Materials Development by Extrusion Process, Journal of the Japan Society for Technology of Plasticity, 47, 456
Tsuji, 2004, Research Trend on Ultrafine Grained Light Metals: From A Viewpoint of Physical Metallurgy, Materia Japan, 43, 405, 10.2320/materia.43.405
Tsuji, 2005, Formation of Ultrafine Grain of Structure Metals by Severe Plastic Deformation, Journal of the Japan Welding Society, 74, 92, 10.2207/qjjws1943.74.92
Valiev, 1991, Plastic Deformation of Alloys with Submicron-grained Structure, Materials Science and Engineering A, 197, 35, 10.1016/0921-5093(91)90316-F
Valiev, 1997, Structure and Mechanical Properties of Ultrafine-grained Metals, Materials Science and Engineering A, 234–236, 59, 10.1016/S0921-5093(97)00183-4
Huang, 2001, Microstructures and Dislocation Configurations in Nanostructured Cu Processed by Repetitive Corrugation and Straightening, Acta Materialia, 49, 1497, 10.1016/S1359-6454(01)00069-6
Korbel, 1981, The Effects of Very High Cumulative Deformation on Structure and Mechanical Properties of Aluminium, 445
Mizunuma, 2005, Large Straining Behavior and Microstructure Refinement of Several Metals by Torsion Extrusion Process, Materials Science Forum, 503–504, 185
Nakamura, 2004, Development of Severe Torsion Straining Process for Rapid Continuous Grain Refinement, Materials Transactions, 45, 3338, 10.2320/matertrans.45.3338
Ghosh, 2000, 29
Kawano, 2005, Super Short Interval Multi-pass Rolling Technology for Manufacturing Ultrafine-grained Steel, Materials Science and Technology, 55
Maki, M. (2001) Future Trend of New Metallurgy Due to Creation of Ultra Fine Grain Steels, Metals & Technology. Kinzoku, 71/8:771–778.
Hagiwara, 2001, Creation of Ferrous Super Metal, Journal of the Japan Society for Technology of Plasticity, 42, 402
Torizuka, 2001, Recent Status of 800MPa Steel Research in the STX-21 Project, Journal of the Japan Society for Technology of Plasticity, 42, 287
Geiger, 1994, Metal forming of Microparts for Electronics, Production Engineering, 2, 15, 10.1007/s11740-007-0072-2
Fukumaru, 2005, Effect of Wire Diameter and Grain Size on Tensile Properties of Austenitic Stainless Steel Wire, Tetsu to Hagane, 191, 828, 10.2355/tetsutohagane1955.91.11_828
Kudo, 1974, Investigation into Multiaxial Extrusion Process to Form Branched Parts, 314
Segal, 1995, Materials Processing by Simple Shear, Materials Science and Engineering A, 170, 157, 10.1016/0921-5093(95)09705-8
Matsumoto, 1998, Consideration of Aluminum Powder by High Plastic Process, 159
Valiev, 1991, Plastic Deformation of Alloys with Submicron-grained Structure, Materials Science and Engineering A, 137, 35, 10.1016/0921-5093(91)90316-F
Furukawa, 2001, Review: Processing of Metals by Equal-channel Angular Pressing, Journal of Material Science, 36, 2835, 10.1023/A:1017932417043
Berbon, 1999, Influence of Pressing Speed on Microstructural Development in Equal-channel Angular Pressing, Metallurgical and Materials Transactions, 30A, 1989, 10.1007/s11661-999-0009-9
Nakashima, 2001, Development of a Multi-pass Facility for Equal-channel Angular Pressing to High Total Strains, Materials Science and Engineering A, 281, 82
Furukawa, 1998, The Shearing Characteristics Associated with Equal-channel Angular Pressing, Materials Science and Engineering A, 257, 328, 10.1016/S0921-5093(98)00750-3
Kamachi, 2003, Equal-channel Angular Pressing Using Plate Samples, Materials Science and Engineering A, 361, 258, 10.1016/S0921-5093(03)00522-7
Ferrasse, 2004, Texture Evolution During Equal Channel Angular Extrusion: Part I. Effect of Route, Number of Passes and Initial Texture, Materials Science and Engineering A, 368, 28, 10.1016/j.msea.2003.09.077
Iwahashi, 1996, Principle of Equal-channel Angular Pressing for the Processing of Ultra-fine Grained Materials, Scripta Materialia, 35, 143, 10.1016/1359-6462(96)00107-8
Iwahashi, 1998, An Investigation of Microstructural Evolution During Equal-channel Angular Pressing, Acta Materialia, 45, 4733, 10.1016/S1359-6454(97)00100-6
Furuno, 2004, Microstructural Development in Equal-channel Angular Pressing Using a 60° Die, Acta Materialia, 52, 2497, 10.1016/j.actamat.2004.01.040
Nemoto, 1998, Equal-channel Angular Pressing: A Novel Tool for Microstructural Control, Metals and Materials International, 4, 1181, 10.1007/BF03025992
Horita, 2000, Development of Fine Grained Structures Using Severe Plastic Deformation, Materials Science and Technology, 16, 1239, 10.1179/026708300101507091
Furukawa, 2003, Factors Influencing Microstructural Development in Equal-channel Angular Pressing, Metals and Materials International, 9, 141, 10.1007/BF03027270
Nakashima, 1998, Influence of Channel Angle on the Development of Ultrafine Grains in Equal-channel Angular Pressing, Acta Materialia, 46, 1589, 10.1016/S1359-6454(97)00355-8
Azushima, 2002, Properties of Ultrafine-grained Steel by Repeated Shear Deformation of Side Extrusion Process, Materials Science and Engineering A, 377, 45, 10.1016/S0921-5093(02)00005-9
Azushima, 2001, Properties of Ultra Low Carbon Steel Produced by Repetitive Shear Deformation of Side Extrusion, Tetsu to Hagane, 87, 762, 10.2355/tetsutohagane1955.87.12_762
Aoki, 2002, Creation of High Strength Carbon Steels by Repetitive Shear Deformation Process and Heat Treatment, Proceedings of the 7th International Conference on Technology of Plasticity, 1195
Huang, 2001, Effect of Die Angle on the Deformation Texture of Copper Processed by Equal Channel Angular Extrusion, Materials Science and Engineering A, 370, 113, 10.1016/S0921-5093(00)01881-5
Semiatin, 2000, The Effect of Material Properties and Tooling Design on Deformation and Fracture During Equal Channel Angular Extrusion, Acta Materialia, 48, 1841, 10.1016/S1359-6454(00)00019-7
Prangnell, 1997, Finite Element Modeling of Equal Channel Angular Extrusion, Scripta Materialia, 37, 983, 10.1016/S1359-6462(97)00192-9
Nisida, 2000, Superplasticity of SiCw/7075 Composites Processed by Rotary-Die Equal-channel Angular Pressing, The Japan Institute of Metals, 64, 1224, 10.2320/jinstmet1952.64.12_1224
Nishida, 2001, Rotary-die Equal-channel Angular Pressing of an Al–7 mass% Si–0.35 mass%–Mg alloy, Scripta Materialia, 45, 261, 10.1016/S1359-6462(01)00985-X
Kim, 2003, Microstructure of Al–Si–Mg Alloy Processed by Rotary-die Equal Channel Angular Pressing, Materials Letters, 57, 1689, 10.1016/S0167-577X(02)01053-4
Ma, 2005, Impact Toughness of an Ultrafine-grained Al–11 mass% Si Alloy Processed by Rotary-die Equal-channel Angular Pressing, Acta Materialia, 53, 220, 10.1016/j.actamat.2004.09.017
Ma, 2005, Impact toughness of an Ingot Hypereutectic Al–23 Mass% Si Alloy Improved by Rotary-die Equal-channel Angular Pressing, Materials Science and Engineering A, 399, 181, 10.1016/j.msea.2005.03.009
Ma, 2005, Characteristics of Plastic Deformation by Rotary-die Equal-channel Angular Pressing, Scripta Materialia, 52, 433, 10.1016/j.scriptamat.2004.11.014
Nakashima, 2000, Development of a Multi-pass Facility for Equal-channel Angular Pressing to High Total Strains, Materials Science and Engineering A, 281, 82, 10.1016/S0921-5093(99)00744-3
Liu, 1998, The Effect of Cumulative Large Plastic Strain on the Structure and Properties of a Cu–Zn Alloy, Materials Science and Engineering A, 242, 137, 10.1016/S0921-5093(97)00467-X
Ono, 2002, Development of Semi-Continuous 4-Stage ECAE Method, 1249
Rosochowski, 2002, Numerical and Physical Modeling of Plastic Deformation in 2-turn Equal Channel Angular Extrusion, Journal of Materials Processing Technology, 125–126, 309, 10.1016/S0924-0136(02)00339-4
Chakkingal, 1998, Microstructure Development During Equal Channel Angular Drawing of Al at Room Temperature, Scripta Materialia, 39, 677, 10.1016/S1359-6462(98)00234-6
Utsunomiya, 1997, Rolling of T-Shaped Profiled Strip by the Satellite Mill, Journal of Materials Engineering and Performance, 6, 319, 10.1007/s11665-997-0096-y
Saito, 2000, Improvement in the r-value of Aluminum Strip by a Continuous Shear Deformation Process, Scripta Materialia, 42, 1139, 10.1016/S1359-6462(00)00349-3
Utsunomiya, 2004, Continuous Grain Refinement of Aluminum Strip by Conshearing, Materials Science and Engineering A, 372, 199, 10.1016/j.msea.2003.12.014
Lee, 2002, Structural Evolution of a Strip-cast Al Alloy Sheet Processed by Continuous Equal-channel Angular Pressing, Metallurgical and Materials Transactions, 33A, 665, 10.1007/s11661-002-0128-z
Nam, 2003, Effect of Precipitates on Microstructural Evolution of 7050 Al Alloy Sheet During Equal Channel Angular Rolling, Materials Science and Engineering A, 347, 253, 10.1016/S0921-5093(02)00597-X
Lee, 2003, Work-softening Behavior of the Ultrafine-grained Al Alloy Processed by High-strain-rate, Dissimilar-channel angular pressing, Metallurgical and Materials Transactions, 34A, 625, 10.1007/s11661-003-0097-x
Raab, 2004, Continuous Processing of Ultrafine Grained Al by ECAP-Conform, Materials Science and Engineering A, 382, 30, 10.1016/j.msea.2004.04.021
Rosochowski, 2007, FEM Simulation of Incremental Shear, AIP Proceedings, 907, 653, 10.1063/1.2729587
Olejnik, 2007, Nanostructuring—a new task for metal forming, 139
Rosochowski, 2007, Finite Element Simulation of Severe Plastic Deformation Processes, Proceedings of the I MECH E Part L Journal of Materials: Design and Applications, 221, 187
Azushima, 2007, Development of ECAE Process for Reducing Friction, 5
Mathieu, 2006, A New Design for Equal Channel Angular Extrusion, Journal of Materials Processing Technology, 173, 29, 10.1016/j.jmatprotec.2005.11.007
Matsuki, 2000, Microstructural Characteristics and Superplastic-like Behavior in Aluminum Powder Alloy Consolidated by Equal-channel Angular Pressing, Acta Materialia, 48, 2625, 10.1016/S1359-6454(00)00061-6
Azushima, 2002, Development of Density of Green Compact by Shear Deformation Process, CAMP-ISIJ, 15, 379
Haouaoui, 2004, Microstructure Evolution and Mechanical Behavior of Bulk Copper Obtained by Consolidation of Micro- and Nanopowders Using Equal-channel Angular Extrusion, Metallurgical and Materials Transactions, 35A, 2935, 10.1007/s11661-004-0241-2
Senkov, 2005, Compaction of Amorphous Aluminum Alloy Powder by Direct Extrusion and Equal Channel Angular Extrusion, Materials Science and Engineering A, 393, 12, 10.1016/j.msea.2004.09.061
Xia, 2005, Back Pressure Equal Channel Angular Consolidation of Pure Al Particles, Scripta Materialia, 53, 1225, 10.1016/j.scriptamat.2005.08.012
Tsuji, 2003, ARB (Accumulative Roll-bonding) and Other new Techniques to Produce Bulk Ultrafine Grained Materials, Advanced Engineering Materials, 5, 338, 10.1002/adem.200310077
Saito, 1998, Ultra-fine Grained Bulk Aluminum Produced by Accumulative Roll-bonding (ARB) Process, Scripta Materialia, 39, 1221, 10.1016/S1359-6462(98)00302-9
Saito, 1999, Novel Ultra-high Straining Process for Bulk Materials-development of the Accumulative Roll-bonding (ARB) Process, Acta Materialia, 47, 579, 10.1016/S1359-6454(98)00365-6
Lee, 2002, Role of Shear Strain in Ultragrain Refinement by Accumulative Roll-bonding (ARB) Process, Scripta Materialia, 46, 281, 10.1016/S1359-6462(01)01239-8
Park, 2001, Microstructural Characteristics and Thermal Stability of Ultrafine Grained 6061 Al Alloy Fabricated by Accumulative Roll bonding Process, Materials Science and Engineering A, 316, 145, 10.1016/S0921-5093(01)01261-8
Xing, 2001, Softening Behavior of 8011 Alloy Produced by Accumulative Roll Bonding Process, Scripta Materialia, 45, 597, 10.1016/S1359-6462(01)01069-7
Heason, 2002, Grain Refinement and Texture Evolution During the Deformation of Al to Ultra-high Strains by Accumulative Roll Bonding (ARB), Materials Science Forum, 369–402, 429, 10.4028/www.scientific.net/MSF.396-402.429
Cao, 2002, Microstructure and Texture Evolution During Annealing of an Aluminium ARB Material, Materials Science Forum, 408–412, 721, 10.4028/www.scientific.net/MSF.408-412.721
Hsieh, 2003, Transformation into Nanocrystalline or Amorphous Materials in Zr-X Binary Systems using ARB Route, Scripta Materialia, 49, 173, 10.1016/S1359-6462(03)00207-0
Bridgman, 1935, Effects of High Shearing Stress Combined with High Hydrostatic Pressure, Physical Review, 48, 825, 10.1103/PhysRev.48.825
Erbel, 1979, Mechanical Properties and Structure of Extremely Strain-hardened Copper, Metals Technology, 6, 482, 10.1179/030716979803276363
Valiev, 1988, The Low-Temperature Superplasticity of Metallic Materials, DAN SSSR, 301, 864
Mishin, 1996, Grain Boundary Distribution and Texture in Ultrafine-grained Copper Produced by Severe Plastic Deformation, Scripta Materialia, 35, 873, 10.1016/1359-6462(96)00222-9
Alexandrov, 1998, Microstructures and Properties of Nanocomposites Obtained Through SPTS Consolidation of Powders, Metallurgical and Materials Transactions, 29A, 2253, 10.1007/s11661-998-0103-4
Sakai, 2005, Application of High Pressure Torsion to Bulk Samples, Materials Science Forum, 503–504, 391
Xu, 2007, The Evolution of Homogeneity in Processing by High-pressure Torsion, Acta Materialia, 55, 203, 10.1016/j.actamat.2006.07.029
Zhao, 2008, Influence of Stacking Fault Energy on the Minimum Grain Size Achieved in Severe Plastic Deformation, Materials Science and Engineering A, 474, 342, 10.1016/j.msea.2007.06.014
Wetscher, 2005, Strain Hardening During High Pressure Torsion Deformation, Materials Science and Engineering A, 410–411, 213, 10.1016/j.msea.2005.08.027
Horita, 2005, Microstructures and Microhardness of an Aluminum Alloy and Pure Copper After Processing by High-pressure Torsion, Materials Science and Engineering A, 410–411, 422, 10.1016/j.msea.2005.08.133
Mazilkin, 2006, Softening of Nanostructured Al–Zn and Al–Mg Alloys After Severe Plastic Deformation, Acta Materialia, 54, 3933, 10.1016/j.actamat.2006.04.025
Wei, 2006, Microstructure and Mechanical Properties of Super-strong Nanocrystalline Tungsten Processed by High-pressure Torsion, Acta Materialia, 54, 4079, 10.1016/j.actamat.2006.05.005
Schafler, 2007, Microstructural Investigation of the Annealing Behaviour of High-pressure Torsion (HPT) Deformed Copper, Materials Science and Engineering A, 462, 139, 10.1016/j.msea.2005.11.085
Zhu, 2006, Effects of Grain Size Distribution on the Mechanical Response of Nanocrystalline Metals: Part II, Acta Materialia, 54, 3307, 10.1016/j.actamat.2006.03.022
Zhilyaev, 2005, Microstructural Evolution in Commercial Purity Aluminum During High-pressure Torsion, Materials Science and Engineering A, 410–411, 227
Dobatkin, 2005, Grain Refinement and Superplastic Flow in an Aluminum Alloy Processed by High-pressure Torsion, Materials Science and Engineering A, 408, 141, 10.1016/j.msea.2005.07.023
Valiev, 1996, Processing of Nanostructured Nickel by Severe Plastic Deformation Consolidation of Ball-milled Powder, Scripta Materialia, 34, 1443, 10.1016/1359-6462(95)00676-1
Shen, 1995, Influence of Powder Consolidation Methods on the Structural and Thermal Properties of a Nanophase Cu–50wt.%Ag Alloy, Nanostructured Materials, 6, 385, 10.1016/0965-9773(95)00077-1
Zehetbauer, 2004, The Role of Hydrostatic Pressure in Sever Plastic Deformation, 435
Rosochowski, 2000, Finite Element Simulation of Cyclic Extrusion-compression, 2530
Richert, 1998, Microband Formation in Cyclic Extrusion Compression of Aluminum, Canadian Metallurgical Quarterly, 37, 449
Richert, 1999, Microstructural Evolution Over A Large Strain Range in Aluminium Deformed by Cyclic-Extrusion–Compression, Materials Science and Engineering A, 268, 275, 10.1016/S0921-5093(98)00988-5
Aizawa, 1993, Mechano-Metallurgical Processing for Direct Fabrication of Solid Non-equilibrium Phase, Faculty of Engineering, University of Tokyo. Series B, 42, 261
Zherebtsov, 2004, Formation of Submicroncrystalline Structure under Warm Severe Plastic Deformation in Ti–6Al–V Large-Scale Billets, 835
Kuziak, 2005, New Possibilities of Achieving Ultra-fine Grained Microstructure in Metals and Alloys Employing MaxStrain Technology, Bulk and Graded Nanometals, 101–102, 43
Groche, 2007, Basics of Linear Flow Splitting, Journal of Materials Processing Technology, 183, 249, 10.1016/j.jmatprotec.2006.10.023
Neugebauer, 2008, Creation of Ultra-Fine Grained (UFG) Materials by Incremental Bulk Metal Forming, Advanced Processing of Novel Functional Materials
Neugebauer, 2005, Spin Extrusion—A New Partial Forming Technology based on 7 NC-Axes Machining, CIRP Annals, 54, 241, 10.1016/S0007-8506(07)60093-6
Tsuji, 2000, 607
Huang, 2003, Microstructural Evolution During Accumulative Roll-bonding of Commercial Purity Aluminum, Materials Science and Engineering A, 340, 265, 10.1016/S0921-5093(02)00182-X
Aoki, 2003, Properties of Annealed High Strength Steels Deformed by Repetitive Side Extrusion Process, Materials Science Forum, 426–432, 2705, 10.4028/www.scientific.net/MSF.426-432.2705
Aoki, 2005, Fatigue Property of High-strength Carbon Steel Deformed by Repetitive Side Extrusion Process, Materials Science Forum, 475–479, 245, 10.4028/www.scientific.net/MSF.475-479.245
Aoki, 2007, Development and Properties of High Strengthened Carbon Steels Produced by Repetitive Side Extrusion and Heat Treatment Process, Materials Science Forum, 539–543, 2884, 10.4028/www.scientific.net/MSF.539-543.2884
Shin, 2000, Microstructures and Mechanical Properties of Equal-channel Angular Pressed Low Carbon steel, Scripta Materialia, 42, 695, 10.1016/S1359-6462(99)00422-4
Shin, 2000, Microstructural Changes in Equal Channel Angular Pressed Low Carbon Steel by Static Annealing, Acta Materialia, 48, 3245, 10.1016/S1359-6454(00)00090-2
Park, 2000, Thermal Stability and Mechanical Properties of Ultrafine Grain Low Carbon Steel, Material Science and Engineering A, 293, 165, 10.1016/S0921-5093(00)01220-X
Shin, 2001, Grain Refinement Mechanism During Equal Channel Angular Pressing of a Low Carbon Steel, Acta Mater, 49, 1285, 10.1016/S1359-6454(01)00010-6
Park, 2002, Annealing Behavior of Submicrometer Grained Ferrite in a Low Carbon Steel Fabricated by Severe Plastic Deformation, Material Science and Engineering A, 334, 79, 10.1016/S0921-5093(01)01796-8
Shin, 2002, Effect of Pressing Temperature on Microstructure and Tensile Behavior of Low Carbon Steels Processed by Equal Channel Angular Pressing, Material Science and Engineering A, 325, 31, 10.1016/S0921-5093(01)01415-0
Park, 2004, Effect of Heat Treatment on Microstructures and Tensile Properties of Ultrafine Grained C-Mn Steel Containing 0.34 mass% V, ISIJ International, 44, 1057, 10.2355/isijinternational.44.1057
Shin, 2005, Ultrafine Grained Steels Processed by Equal Channel Angular Pressing, Material Science and Engineering A, 410–411, 299, 10.1016/j.msea.2005.08.025
Hidaka, 1999, Mechanical Properties of Ultra Fine-grained Steel with (Ferrite+Cementite) Two-Phase Structure, CAMP ISIJ, 12, 357
Koizumi, 2003, High Damping Capacity of Ultra-fine Grained Aluminum Produced by Accumulative Roll Bonding, Journal of Alloys and Compounds, 355, 47, 10.1016/S0925-8388(03)00265-2
Tsuji, 2002, Strength and Ductility of Ultrafine Grained Aluminum and Iron Produced by ARB and Annealing, Scripta Materialia, 47, 893, 10.1016/S1359-6462(02)00282-8
Tsuji, 1999, Superplasticity of Ultra-fine Grained Al–Mg Alloy Produced by Accumulative Roll-bonding, Materials Transactions JIM, 40, 765, 10.2320/matertrans1989.40.765
Lee, 2000, Fabrication and Refinement of 6061(p)/6063 Aluminum Laminate by Accumulative Roll-bonding (ARB) Process, Materials Science Forum, 331–333, 1169, 10.4028/www.scientific.net/MSF.331-337.1169
Kim, 2005, Elongation Increase in Ultra-fine Grained Al–Fe–Si Alloy Sheets, Acta Materialia, 53, 1737, 10.1016/j.actamat.2004.12.022
Tsuji, 2004, Aging Behavior of Ultrafine Grained Al–2wt.% Cu Alloy Severely Deformed by Accumulative Roll Bonding, Science and Technology of Advanced Materials, 5, 173, 10.1016/j.stam.2003.10.019
Lee, 1999, Strengthening of Sheath-rolled Aluminum Based MMC by the ARB Process, Materials Transactions JIM, 40, 1422, 10.2320/matertrans1989.40.1422
Kamikawa, 2004, Microstructure and Texture Through Thickness of Ultralow Carbon IF Steel Sheet Severely Deformed by Accumulative Roll-bonding, Science and Technology of Advanced Materials, 5, 163, 10.1016/j.stam.2003.10.018
Tsuji, 2004, Toughness of Ultrafine Grained Ferritic Steels Fabricated by ARB and Annealing Process, Materials Transactions JIM, 45, 2272, 10.2320/matertrans.45.2272
Tsuji, 2004, Fabrication of Ultrafine Grained Steels without Severe or Heavy Plastic Deformation, Transactions of Material Research Society of Japan, 29, 3529
Terada, 2006, Microstructure and Mechanical Properties of Commercial Purity Titanium Severely Deformed by ARB Process, Journal of Material Science, 42, 1673, 10.1007/s10853-006-0909-7
Tsuji, 2005, Bulk Mechanical Alloying of Zr–Cu System by Accumulative Roll Bonding (ARB), Journal of Metastable and Nanocrystalline Materials, 24–25, 643, 10.4028/www.scientific.net/JMNM.24-25.643
Valiev, 2002, Paradox of Strength and Ductility in Metals Processed by Severe Plastic Deformation, Journal of Materials Research, 17, 5, 10.1557/JMR.2002.0002
Valiev, 2003, The Effect of Annealing on Tensile Deformation Behavior of Nanostructured SPD Titanium, Scripta Materialia, 49, 669, 10.1016/S1359-6462(03)00395-6
Leo, 2007, Properties and Deformation Behaviour of Severe Plastic Deformed Aluminium Alloys, Journal of Materials Processing Technology, 182, 207, 10.1016/j.jmatprotec.2006.07.038
Zhang, 2005, Cyclic Deformation and Fatigue Properties of Al–0.7wt.% Cu Alloy Produced by Equal Channel Angular Pressing, Materials Science and Engineering A, 412, 279, 10.1016/j.msea.2005.08.221
Kim, 2005, Large Enhancement in Mechanical Properties of the 6061 Al Alloys after a Single Pressing by ECAP, Scripta Materialia, 53, 1207, 10.1016/j.scriptamat.2005.06.014
Krasilnikov, 2005, Tensile Strength and Ductility of Ultra-fine-grained Nickel Processed by Severe Plastic Deformation, Materials Science and Engineering A, 397, 330, 10.1016/j.msea.2005.03.001
Cherukuri, 2005, Comparison of the Properties of SPD-processed AA-6061 by Equal-channel Angular Pressing, Multi-axial Compressions/forgings and Accumulative Roll Bonding, Materials Science and Engineering A, 410–411, 394, 10.1016/j.msea.2005.08.024
Zhang, 2006, Damping Behavior of Ultrafine-grained Pure Aluminum L2 and the Damping Mechanism, Acta Metallurgica Sinica, 19, 223, 10.1016/S1006-7191(06)60048-3
Ma, 2005, Effect of Severe Plastic Deformation on Tensile Properties of a Cast Al–11 Mass% Si Alloy, Materials Science and Engineering A, 395, 70, 10.1016/j.msea.2004.12.038
Agnew, 1999, Overview of Fatigue Performance of Cu Processed by Severe Plastic Deformation, Journal of Electronic Materials, 28, 1038, 10.1007/s11664-999-0181-0
Vinogradov, 2001, Cyclic Behavior of Ultrafine-grain Titanium Produced by Severe Plastic Deformation, Materials Science and Engineering A, 318, 163, 10.1016/S0921-5093(01)01262-X
Vinogradov, 1999, Fatigue Properties of 5056 Al–Mg Alloy Produced by Equal-channel Angular Pressing, Nanostructured Materials, 11, 925, 10.1016/S0965-9773(99)00392-X
Tsuji, 1999, Low Temperature Superplasticity of Ultra-fine Grained 5083 Aluminum Alloy Produced by Accumulative Roll-Bonding, Material Science Forum, 304–307, 73, 10.4028/www.scientific.net/MSF.304-306.73
Miyahara, 2006, Exceptional Superplasticity in an AZ61 Magnesium Alloy Processed by Extrusion and ECAP, Materials Science and Engineering A, 420, 240, 10.1016/j.msea.2006.01.043
Mishra, 1998, Tensile Superplasticity in a Nanocrystalline Nickel Aluminide, Materials Science and Engineering A, 252, 174, 10.1016/S0921-5093(98)00684-4
Valiev, 1998, Processing and Mechanical Properties of Nanocrystalline Alloys Prepared by Severe Plastic Deformation, Material Science Forum, 269–272, 969, 10.4028/www.scientific.net/MSF.269-272.969
Valiev, 1991, TEM Study of a Superplastically Deformed Nl3Al Alloy Doped with Boron, Scripta Metallurgica et Materialia, 25, 1945, 10.1016/0956-716X(91)90333-V
Sutton, 1995
Valiev, 1997, Observations of High Strain Rate Superplasticity in Commercial Aluminum Alloys with Ultrafine Grain Sizes, Scripta Materialia, 37, 1945, 10.1016/S1359-6462(97)00387-4
Komura, 1998, High Strain Rate Superplasticity in an Al–Mg Alloy Containing Scandium, Scripta Materialia, 38, 1851, 10.1016/S1359-6462(98)00099-2
Berbon, 1998, Requirements for Achieving High-strain-rate Superplasticity in cast Aluminium Alloys, Philosophical Magazine Letters, 78, 313, 10.1080/095008398177896
Ko, 2005, Microstructural Influence on Low-temperature Superplasticity of Ultrafine-grained Ti–6Al–4V Alloy, Materials Science and Engineering A, 410–411, 156, 10.1016/j.msea.2005.08.080
Kawasaki, 2005, An Investigation of Cavity Growth in a Superplastic Aluminum Alloy Processed by ECAP, Acta Materialia, 53, 5353, 10.1016/j.actamat.2005.08.012
Xu, 2005, Creep and Superplasticity in a Spray-cast Aluminum Alloy Processed by ECA Pressing, Materials Science and Engineering A, 410–411, 398, 10.1016/j.msea.2005.08.072
Balasubramanian, 2005, An analysis of superplastic flow after processing by ECAP, Materials Science and Engineering A, 410–411, 476, 10.1016/j.msea.2005.08.090
Azushima, 2000, High Strengthening by Combination Process of Shear Deformation and Rolling, Proceedings of 2002 Japanese Spring Conference on Technology of Plasticity, 309
Stolyarov, 2003, Grain Refinement and Properties of Pure Ti Processed by Warm ECAP and Cold Rolling, Materials Science and Engineering A, 343, 43, 10.1016/S0921-5093(02)00366-0
Stolyarov, 2001, Microstructure and Properties of Pure Ti Processed by ECAP and Cold Extrusion, Materials Science and Engineering A, 303, 82, 10.1016/S0921-5093(00)01884-0
Park, 2004, Enhancement of High Strain Rate Superplastic Elongation of a Modified 5154 Al by Subsequent Rolling after Equal Channel Angular Pressing, Scripta Materialia, 51, 479, 10.1016/j.scriptamat.2004.06.001
Park, 2005, Effect of Post-rolling after ECAP on Deformation Behavior of ECAPed Commercial Al–Mg alloy at 723 K, Materials Science and Engineering A, 393, 118, 10.1016/j.msea.2004.09.066
Park, 2000, Thermal Stability and Mechanical Properties of Ultrafine Grained, Materials Science and Engineering A, 293, 165, 10.1016/S0921-5093(00)01220-X
Shin, 2002, Ultrafine Grained Low Carbon Steels Fabricated by Equal Channel Angular Pressing: Microstructures and Tensile Properties, ISIJ International, 42, 1490, 10.2355/isijinternational.42.1490
Fukushima, 2005, Development of Super Short Interval Multi Pass Rolling Technology for Ultrafine-grained Hot Strip, Advanced Technology of Plasticity, 531
Miyata, 2007, Ultrafine Grained Steels Due to Super Short Interval Multi-pass Rolling in Stable Austenite Region, 539
Ohmori, 2004, Effect of Deformation Temperature and Strain Rate on Evolution of Ultraline Grained Structure through Single-pass Large-strain Warm Deformation in a Low Carbon Steel, Material Transactions, 45, 2224, 10.2320/matertrans.45.2224
Song, 2005, Mechanical Properties of an Ultrafine Grained C-Mn Steel Processed by Warm Deformation and Annealing, Acta Materialia, 53, 4881, 10.1016/j.actamat.2005.07.009
Zhao, 2006, Dependence of Strength and Strength-evolution Balance on the Volume Fraction of Cementite Particles in Ultrafine Grained Ferrite/Cementite Steels, Scripta Materialia, 54, 1385, 10.1016/j.scriptamat.2005.11.067
Oomori, 2003, Evolution of Ultrafine-grained Ferrite Structure through Multi-pass Warm Caliber-rolling, Tetsu to Hagane, 89, 781, 10.2355/tetsutohagane1955.89.7_781
Torizuka, 2006, Effect of strain on the Microstructure and Mechanical Properties of Multi-pass Warm Caliber Rolled Low Carbon Steel, Scripta Materialia, 54, 563, 10.1016/j.scriptamat.2005.10.055
Torizuka, 2006, Microstructure evolution and Strength-reduction in Area Balance of Ultrafine-grained Steels Processed by Warm Caliber Rolling, Scripta Materialia, 55, 751, 10.1016/j.scriptamat.2006.03.067
Torizuka, 2005, Development of Ultra Steel Screw, CAMP-ISIJ, 18, 697
Zhernakov, 1997
Yanagida, 2008, Formability of Steels Subjected to Cold ECAE Processes, Journal of Materials Processing Technology, 201, 390, 10.1016/j.jmatprotec.2007.11.199
Wakita, 2007, Microstructures and Mechanical Properties of Ultrafine-grained Steel Due to Super Short Interval Multi-pass Rolling, 8
Nieh, 1997
Kaibyshev, 1992, Superplasticity in Metals
Ferrase, S., Alford, F., Grabmeier, S., Düvel, A., Zedlitz, R., Strothers, S., Evans, J., Daniels, B. (2003) Technology White Paper, Honeywell International Inc. (http://www.honeywell.com/sites/docs/doc128e30a-f9d1a68f6a-e0df9bfada07602278603c6cb43673fb.pdf).
Ferrase, 2006, Scale Up and Commercialization of ECAE Sputtering Products with Submicrocrystalline Structures, 585
Salimgareeva, 2005, Nanostructuring of Ti in long-sized Ti Rods by Severe Plastic Deformation, 661
Valiev, 2006, The New Trends in SPD Processing to Fabricate Bulk Nanostructured Materials, 1
Newbery, 2006, Multi-scale Al 5083 for Military Vehicles with Improved Performance, JOM, 58, 56, 10.1007/s11837-006-0216-4
Sato, 2004, Friction Stir Welding of Ultrafine Grained Al Alloy 1100 Produced by Accumulative Roll-bonding, Scripta Materialia, 50, 57, 10.1016/j.scriptamat.2003.09.037
Wei, 2005, Plastic Flow Localization in Bulk Tungsten with Ultrafine Microstructure, Applied Physics Letters, 86, 10.1063/1.1875754
US Patent 2005/6,854 634 B2 Method of Manufacturing Rivets Having High Strength and Formability; assignee: The Boeing Company, Chicago, IL, 2005.
Lee, 1999, Developing Superplastic Properties in an Aluminum Alloy Through Severe Plastic Deformation, Materials Science and Engineering A, 272, 63, 10.1016/S0921-5093(99)00470-0
Kaibyshev, 2006, Advanced Superplastic Forming and Diffusion Bonding of Titanium Alloy, Journal of Materials Science and Technology, 22, 343, 10.1179/174328406X83932
Srinivasan, 2006, Scaling up of Equal Channel Angular Pressing for the Production of Forging Stock, Materials Science Forum, 503–504, 371, 10.4028/www.scientific.net/MSF.503-504.371
Presz, 2006, The Influence of Grain Size on Surface Quality of Microformed Components, 587
Popov, 2006, Micro-extrusion of UFG Aluminium, 127
Rosochowski, 2007, Micro-EDM of UFG Aluminium, 203
Osmer, 2007, Diamond Turning of Ultrafine Grained Aluminium Alloys, 316