Sensitivity of the response of thick cross-ply doubly curved panels to edge clamping

Bert, 1974, Composite material mechanics: structural mechanics, AIAA J, 12, 1173, 10.2514/3.49450 Chaudhuri, 1986, Arbitrarily laminated anisotropic cylindrical shells under uniform pressure, AIAA J, 24, 1851, 10.2514/3.9534 Abu-Arja, 1989, Influence of transverse shear deformation on scaling of cross-ply cylindrical shells, J Compos Mater, 23, 673, 10.1177/002199838902300703 Abu-Arja, 1989, Moderately-thick angle-ply cylindrical shells under internal pressure, ASME J Appl Mech, 56, 652, 10.1115/1.3176142 Chaudhuri, 1989, Closed-form solutions for arbitrarily laminated anisotropic cylindrical shells (tubes) including shear deformation, AIAA J, 27, 1597, 10.2514/3.10307 Noor, 1990, Assessment of computational models for multilayered composite shells, Appl Mech Rev, 43, 67, 10.1115/1.3119162 Chaudhuri, 1989, On analytical solutions to boundary-value problems of doubly-curved moderately-thick orthotropic shells, Int J Eng Sci, 27, 1325, 10.1016/0020-7225(89)90057-8 Hobson, 1950, vol. II Goldstein, 1936, The stability of viscous fluid flow under pressure between parallel planes, Proc Cambridge Phil Soc, 32, 40, 10.1017/S0305004100018843 Winslow, 1951, Differentiation of Fourier series in stress solutions for rectangular plates, Q J Mech Appl Math, 4, 449, 10.1093/qjmam/4.4.449 Chaudhuri, 1989, On boundary-discontinuous double Fourier series solution to a system of completely coupled P.D.E.’s, Int J Eng Sci, 27, 1005, 10.1016/0020-7225(89)90080-3 Chaudhuri, 2002, On the roles of complementary and admissible boundary constraints in Fourier solutions to boundary-value problems of completely coupled rth order P.D.E.’s, J Sound Vib, 251, 261, 10.1006/jsvi.2001.3913 Green, 1944, Double Fourier series and boundary value problems, Proc Cambridge Phil Soc, 40, 222, 10.1017/S0305004100018375 Green, 1945, The buckling of flat rectangular plywood plates, Phil Mag, 36, 659, 10.1080/14786444508520955 Whitney, 1970, Effect of boundary conditions on the response of laminated composites, J Compos Mater, 4, 192, 10.1177/002199837000400205 Whitney, 1971, Fourier analysis of clamped anisotropic plates, ASME J Appl Mech, 38, 530, 10.1115/1.3408810 Whitney, 1970, Analysis of a simply supported laminated anisotropic plate, AIAA J, 8, 28, 10.2514/3.5601 Kabir, 2001, Free vibration analysis of thin arbitrarily laminated anisotropic plates using boundary-continuous displacement Fourier approach, Compos Struct, 53, 469, 10.1016/S0263-8223(01)00059-9 Chaudhuri, 2005, A combined theoretical and experimental investigation on free vibration of thin symmetrically laminated plates, Compos Struct, 67, 85, 10.1016/j.compstruct.2004.01.001 Kabir, 1993, A direct Fourier approach for analysis of thin finite-dimensional cylindrical panels, Comput Struct, 46, 279, 10.1016/0045-7949(93)90192-G Chaudhuri, 1994, Static and dynamic analysis of finite general cross-ply doubly-curved panels using classical shallow shell theories, Compos Struct, 28, 73, 10.1016/0263-8223(94)90007-8 Chaudhuri, 1993, Boundary-discontinuous Fourier analysis of doubly-curved panels using classical shallow shell theories, Int J Eng Sci, 31, 1551, 10.1016/0020-7225(93)90031-O Chaudhuri, 1992, A boundary-continuous-displacement based Fourier analysis of laminated doubly-curved panels using classical shallow shell theories, Int J Eng Sci, 30, 1647, 10.1016/0020-7225(92)90133-2 Chaudhuri, 1992, Influence of laminations and boundary conditions on the response of moderately thick cross-ply rectangular plates, J Compos Mater, 26, 51, 10.1177/002199839202600104 Chaudhuri, 1992, Fourier analysis of clamped moderately thick arbitrarily laminated plates, AIAA J, 30, 2796, 10.2514/3.11306 Chaudhuri, 1993, Vibration of clamped moderately thick general cross-ply plates using a generalized Navier’s approach, Compos Struct, 24, 311, 10.1016/0263-8223(93)90025-L Chaudhuri, 1994, Effect of boundary constraint on the frequency response of moderately thick flat laminated panels, Compos Eng, 4, 417, 10.1016/S0961-9526(09)80015-4 Kabir, 1994, Vibration of clamped moderately thick arbitrarily laminated plates using a generalized Navier’s approach, J Sound Vib, 171, 397, 10.1006/jsvi.1994.1128 Chaudhuri, 1988, Exact solution of shear-flexible doubly curved anti-symmetric angle-ply shells, Int J Eng Sci, 26, 587, 10.1016/0020-7225(88)90056-0 Chaudhuri, 1991, Static analysis of moderately thick anti-symmetric angle-ply cylindrical panels and shells, Int J Solid Struct, 28, 1, 10.1016/0020-7683(91)90044-G Chaudhuri, 1992, Sensitivity of the response of moderately thick cross-ply doubly-curved panels to lamination and boundary constraint, Part-I: theory, Part-II: application, Int J Solid Struct, 30, 273, 10.1016/0020-7683(93)90066-G Chaudhuri, 2005, Effect of boundary constraint on the frequency response of moderately thick doubly curved cross-ply panels using mixed Fourier solution functions, J Sound Vib, 283, 263, 10.1016/j.jsv.2004.04.015 Kabir, 1991, Free vibrations of anti-symmetric angle-ply finite doubly curved shells, Int J Solid Struct, 28, 17, 10.1016/0020-7683(91)90045-H Kabir, 1994, On Gibbs-phenomenon-free Fourier solution for finite shear-flexible laminated clamped curved panels, Int J Eng Sci, 32, 501, 10.1016/0020-7225(94)90137-6 Kabir, 2003, Frequency response of a moderately thick anti-symmetric cross-ply cylindrical panel with mixed type of Fourier solution functions, J Sound Vib, 259, 809, 10.1006/jsvi.2002.5123 Basset, 1890, On the extension and flexure of cylindrical and spherical thin elastic shells, Phil Trans Royal Soc A, 181, 433, 10.1098/rsta.1890.0007 Nelson, 1974, A refined theory for laminated orthotropic plates, ASME J Appl Mech, 41, 177, 10.1115/1.3423219 Levinson, 1980, An accurate simple theory of the statics and dynamics of elastic plates, Mech Res Commun, 7, 343, 10.1016/0093-6413(80)90049-X Bert, 1984, A critical evaluation of new plate theories applied to laminated plates, Compos Struct, 2, 329, 10.1016/0263-8223(84)90004-7 Librescu, 1988, Analysis of symmetric cross-ply laminated elastic plates using a higher-order theory: Part I – stress and displacement, Compos Struct, 9, 189, 10.1016/0263-8223(88)90014-1 Chaudhuri, 1995, Fourier solution to higher-order theory based laminated shell boundary-value problem, AIAA J, 33, 1681, 10.2514/3.12498 Oktem, 2007, Levy type analysis of cross-ply plates based on higher-order theory, Compos Struct, 78, 243, 10.1016/j.compstruct.2005.09.012 Oktem, 2007, Levy type Fourier analysis of thick cross-ply doubly-curved panels, Compos Struct, 80, 475, 10.1016/j.compstruct.2006.05.020 Oktem, 2007, Fourier solution to a thick Levy type clamped plate problem, Compos Struct, 79, 481, 10.1016/j.compstruct.2006.02.007 Oktem, 2007, Fourier analysis of thick cross-ply Levy type clamped doubly-curved panels, Compos Struct, 80, 489, 10.1016/j.compstruct.2006.05.028 Oktem, 2008, Effect of inplane boundary constraints on the response of thick general (unsymmetric) cross-ply plates, Compos Struct, 83, 1, 10.1016/j.compstruct.2007.03.002 Oktem, 2008, Boundary discontinuous Fourier analysis of thick cross-ply clamped plates, Compos Struct, 82, 539, 10.1016/j.compstruct.2007.02.001 Seide, 1975 Chaudhuri, 1988, A degenerate triangular shell element with constant cross-sectional warping, Comput Struct, 28, 315, 10.1016/0045-7949(88)90071-5 Jones, 1999