Self-Lubricating Si3N4-based composites toughened by in situ formation of silver

Riley, 2010, Silicon nitride and related materials, J. Am. Ceram. Soc., 83, 245, 10.1111/j.1151-2916.2000.tb01182.x Dante, 2012, A review and a fundamental theory of silicon nitride tribochemistry, Wear, 288, 27, 10.1016/j.wear.2012.03.001 Raga, 2016, Damage initiation and evolution in silicon nitride under non-conforming lubricated hybrid rolling contact, Wear, 360–361, 147, 10.1016/j.wear.2016.05.005 Mitomo, 2010, Microstructural development during gas-pressure sintering of α-silicon nitride, J. Am. Ceram. Soc., 75, 103, 10.1111/j.1151-2916.1992.tb05449.x Saito, 1997, An analytical observation of the tribochemical reaction of silicon nitride sliding with low friction in aqueous solutions, Wear, 205, 153, 10.1016/S0043-1648(96)07287-0 Honda, 1996, Tribochemical characterization of the lubrication film at the Si3N4Si3N4 interface sliding in aqueous solutions, Appl. Surf. Sci., 92, 651, 10.1016/0169-4332(95)00312-6 Siopis, 2016, The effect of tribomaterial pairings on wear of an aluminum slider under high sliding speeds and high contact pressure, Wear, 352–353, 180, 10.1016/j.wear.2016.02.014 Takadoum, 1998, The wear characteristics of silicon nitride, J. Eur. Ceram. Soc., 18, 553, 10.1016/S0955-2219(97)00157-X Tatarko, 2013, Influence of rare-earth oxide additives and SiC nanoparticles on the wear behaviour of Si3N4-based composites at temperatures up to 900 °C, Wear, 300, 155, 10.1016/j.wear.2013.01.030 Cranmer, 1985, Friction and wear properties of monolithic silicon-based ceramics, J. Mater. Sci., 20, 2029, 10.1007/BF01112286 Gee, 1993, The combined effect of speed and humidity on the wear and friction of silicon nitride, Wear, 162–164, 234, 10.1016/0043-1648(93)90506-H Skopp, 1995, Tribological behavior of silicon nitride materials under unlubricated sliding between 22 °C and 1000 °C, Wear, 181, 571 Skopp, 1990, Unlubricated sliding friction and wear of various Si3N4 pairs between 22 °C and 1000 °C, Tribol. Int., 23, 189, 10.1016/0301-679X(90)90016-I Xing, 2017, Mechanical properties of Si3N4 ceramics from an in-situ synthesized a-Si3N4/β-Si3N4 composite powder, Ceram. Int., 43, 2150, 10.1016/j.ceramint.2016.10.196 Balázsi, 2017, Si3N4/graphene nanocomposites for tribological application in aqueous environments prepared by attritor milling and hot pressing, J. Eur. Ceram. Soc., 37, 3797, 10.1016/j.jeurceramsoc.2017.03.022 Mahathanabodee, 2014, Dry sliding wear behavior of SS316L composites containing h-BN and MoS2 solid lubricants, Wear, 316, 37, 10.1016/j.wear.2014.04.015 Zhang, 2017, Microstructures and tribological properties of carbon/carbon-boron nitride composites fabricated by powdered additives and chemical vapor infiltration, Ceram. Int., 43, 7607, 10.1016/j.ceramint.2017.03.055 Sliney, 1986, The Use of silver in self-lubricating coatings for extreme temperatures, ASLE Trans., 29, 370, 10.1080/05698198608981698 Sliney, 1982, Solid lubricant materials for high temperatures-a review, Tribol. Int., 15, 303, 10.1016/0301-679X(82)90089-5 Aouadi, 2010, Adaptive VN/Ag nanocomposite coatings with lubricious behavior from 25 °C to 1000 °C, Acta Mater., 58, 5326, 10.1016/j.actamat.2010.06.006 Dang, 2017, Influence of Ag contents on structure and tribological properties of TiSiN-Ag nanocomposite coatings on Ti-6Al-4V, Appl. Surf. Sci., 394, 613, 10.1016/j.apsusc.2016.10.126 Pandey, 2018, Multi-length scale tribology of hydroxyapatite reinforced with ceria and silver, Wear, 404–405, 12, 10.1016/j.wear.2018.01.006 Hu, 2007, Silver diffusion and high-temperature lubrication mechanisms of YSZ-Ag-Mo based nanocomposite coatings, Compos. Sci. Technol., 67, 336, 10.1016/j.compscitech.2006.09.008 Chou, 1995, Toughening and strengthening of alumina with silver inclusions, J. Eur. Ceram. Soc., 15, 291, 10.1016/0955-2219(95)90351-I Duan, 2003, TiO2 additives for in situ formation of toughened silicon nitride-based composites, Mater. Lett., 57, 4156, 10.1016/S0167-577X(03)00282-9 Gao, 2004, Preparation and properties of TiN-Si3N4 composites, J. Eur. Ceram. Soc., 24, 381, 10.1016/S0955-2219(03)00218-8 Evans, 1976, Fracture toughness determinations by indentation, J. Am. Ceram. Soc., 59, 371, 10.1111/j.1151-2916.1976.tb10991.x Jae-Hee, 2010, Fabrication of silicon nitride nanoceramics and their tribological properties, J. Am. Ceram. Soc., 93, 1461 Li, 2017, Ag/N-doped reduced graphene oxide incorporated with molecularly imprinted polymer: an advanced electrochemical sensing platform for salbutamol determination, Biosens. Bioelectron., 90, 210, 10.1016/j.bios.2016.11.016 Ashby, 1989, Flow characteristics of highly constrained metal wires, Acta Metall., 37, 1847, 10.1016/0001-6160(89)90069-2 Huang, 2012, Novel sialon-based ceramics toughened by ferro-molybdenum alloy, J. Am. Ceram. Soc., 95, 859 Gomes, 2000, Effect of α-/β Si3N4-phase ratio and microstructure on the tribological behaviour up to 700 °C, Wear, 239, 59, 10.1016/S0043-1648(99)00367-1 He, 2015, Effects of humidity and counter-surface on tribochemical wear of soda-lime-silica glass, Wear, 342–343, 100, 10.1016/j.wear.2015.08.016 Jahanmir, 1988, Friction and wear of silicon nitride lubricated by humid air, water, hexadecane and hexadecane + 0.5 percent stearic acid, Tribol. Trans., 31, 32, 10.1080/10402008808981795 Liu, 2017, High-temperature flexural strength and reliability of Ti(C5N5)-TiB2-(W7Ti3)C composite cermet tool material, Ceram. Int., 43, 12511, 10.1016/j.ceramint.2017.06.123 Tai, 2010, Elevated-temperature toughness and hardness of a hot-pressed Al2O3-WC-Co composite, J. Am. Ceram. Soc., 81, 257, 10.1111/j.1151-2916.1998.tb02328.x